blob: fc696cf0cee2947f80cac7fe842e551a9eea895c [file] [log] [blame]
menu "PowerPC and LayerScape SPL Boot options"
depends on (PPC && SUPPORT_SPL && !SPL_FRAMEWORK) || \
((ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && SUPPORT_SPL)
config SPL_NAND_BOOT
bool "Load SPL from NAND flash"
depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
config SPL_MMC_BOOT
bool "Load SPL from SD Card / eMMC"
depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
config SPL_SPI_BOOT
bool "Load SPL from SPI flash"
depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK)
config SPL_FSL_PBL
bool "Create SPL in Freescale PBI format"
depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \
SUPPORT_SPL
help
Create boot binary having SPL binary in PBI format concatenated with
u-boot binary.
config SPL_SYS_CCSR_DO_NOT_RELOCATE
bool "Ensures that CCSR is not relocated"
depends on PPC
help
If this is defined, then CFG_SYS_CCSRBAR_PHYS will be forced to a
value that ensures that CCSR is not relocated.
config TPL_SYS_CCSR_DO_NOT_RELOCATE
def_bool y
depends on SPL_SYS_CCSR_DO_NOT_RELOCATE
menu "PowerPC SPL / TPL specific options"
depends on PPC && (SPL && !SPL_FRAMEWORK)
config SPL_INIT_MINIMAL
bool "Arch init code will be built for a very small image"
config SPL_FLUSH_IMAGE
bool "Clean dcache and invalidate icache after loading the image"
config SPL_SKIP_RELOCATE
bool "Skip relocating SPL"
config SPL_GD_ADDR
hex "Address to use for global data (gd) in SPL"
depends on !SPL_INIT_MINIMAL
config SPL_RELOC_TEXT_BASE
hex "Address to relocate SPL to"
default SPL_TEXT_BASE
help
If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no
relocation is done).
config SPL_RELOC_STACK
hex "Address of the start of the stack SPL will use after relocation."
help
If unspecified, this is equal to CFG_SYS_SPL_MALLOC_START. Starting
address of the malloc pool used in SPL. When this option is set the full
malloc is used in SPL and it is set up by spl_init() and before that, the
simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined.
config SPL_RELOC_MALLOC
bool "SPL has malloc pool after relocation"
config SPL_RELOC_MALLOC_ADDR
hex "Address of malloc pool in SPL"
depends on SPL_RELOC_MALLOC
config SPL_RELOC_MALLOC_SIZE
hex "Size of malloc pool in SPL"
depends on SPL_RELOC_MALLOC
config TPL_GD_ADDR
hex "Address to use for global data (gd) in TPL"
depends on TPL
config TPL_RELOC_TEXT_BASE
hex "Address to relocate TPL to"
depends on TPL
default TPL_TEXT_BASE
help
If unspecified, this is equal to CONFIG_TPL_TEXT_BASE (i.e. no
relocation is done).
config TPL_RELOC_STACK
hex "Address of the start of the stack TPL will use after relocation."
depends on TPL
help
If unspecified, this is equal to CONFIG_SYS_TPL_MALLOC_START. Starting
address of the malloc pool used in TPL. When this option is set the full
malloc is used in TPL and it is set up by spl_init() and before that, the
simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined.
config TPL_RELOC_MALLOC
bool "TPL has malloc pool after relocation"
depends on TPL
config TPL_RELOC_MALLOC_ADDR
hex "Address of malloc pool in TPL"
depends on TPL_RELOC_MALLOC
config TPL_RELOC_MALLOC_SIZE
hex "Size of malloc pool in TPL"
depends on TPL_RELOC_MALLOC
config TPL_PAD_TO
hex "Offset to which the TPL should be padded before appending the TPL payload"
depends on TPL && !TPL_FRAMEWORK
default TPL_MAX_SIZE
help
Image offset to which the TPL should be padded before appending the
TPL payload. By default, this is defined as CONFIG_TPL_MAX_SIZE, or 0 if
CONFIG_TPL_MAX_SIZE is undefined. CONFIG_TPL_PAD_TO must be either
0, meaning to append the TPL payload without any padding, or >=
CONFIG_TPL_MAX_SIZE.
endmenu
endmenu