blob: 47474bdc7e3edeb82f4edfd826ee69e6748ed917 [file] [log] [blame]
/*
* Copyright (C) 2015 Michael Brown <mbrown@fensystems.co.uk>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
* You can also choose to distribute this program under the terms of
* the Unmodified Binary Distribution Licence (as given in the file
* COPYING.UBDL), provided that you have satisfied its requirements.
*/
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
#include <strings.h>
#include <unistd.h>
#include <errno.h>
#include <byteswap.h>
#include <ipxe/malloc.h>
#include <ipxe/pci.h>
#include <ipxe/usb.h>
#include "ehci.h"
#include "uhci.h"
/** @file
*
* USB Universal Host Controller Interface (UHCI) driver
*
*/
/******************************************************************************
*
* Register access
*
******************************************************************************
*/
/**
* Check that address is reachable
*
* @v addr Address
* @v len Length
* @ret rc Return status code
*/
static inline __attribute__ (( always_inline)) int
uhci_reachable ( void *addr, size_t len ) {
physaddr_t phys = virt_to_phys ( addr );
/* Always reachable in a 32-bit build */
if ( sizeof ( physaddr_t ) <= sizeof ( uint32_t ) )
return 0;
/* Reachable if below 4GB */
if ( ( ( phys + len - 1 ) & ~0xffffffffULL ) == 0 )
return 0;
return -ENOTSUP;
}
/******************************************************************************
*
* Run / stop / reset
*
******************************************************************************
*/
/**
* Start UHCI device
*
* @v uhci UHCI device
*/
static void uhci_run ( struct uhci_device *uhci ) {
uint16_t usbcmd;
/* Set run/stop bit */
usbcmd = inw ( uhci->regs + UHCI_USBCMD );
usbcmd |= ( UHCI_USBCMD_RUN | UHCI_USBCMD_MAX64 );
outw ( usbcmd, uhci->regs + UHCI_USBCMD );
}
/**
* Stop UHCI device
*
* @v uhci UHCI device
* @ret rc Return status code
*/
static int uhci_stop ( struct uhci_device *uhci ) {
uint16_t usbcmd;
uint16_t usbsts;
unsigned int i;
/* Clear run/stop bit */
usbcmd = inw ( uhci->regs + UHCI_USBCMD );
usbcmd &= ~UHCI_USBCMD_RUN;
outw ( usbcmd, uhci->regs + UHCI_USBCMD );
/* Wait for device to stop */
for ( i = 0 ; i < UHCI_STOP_MAX_WAIT_MS ; i++ ) {
/* Check if device is stopped */
usbsts = inw ( uhci->regs + UHCI_USBSTS );
if ( usbsts & UHCI_USBSTS_HCHALTED )
return 0;
/* Delay */
mdelay ( 1 );
}
DBGC ( uhci, "UHCI %s timed out waiting for stop\n", uhci->name );
return -ETIMEDOUT;
}
/**
* Reset UHCI device
*
* @v uhci UHCI device
* @ret rc Return status code
*/
static int uhci_reset ( struct uhci_device *uhci ) {
uint16_t usbcmd;
unsigned int i;
int rc;
/* The UHCI specification states that resetting a running
* device may result in undefined behaviour, so try stopping
* it first.
*/
if ( ( rc = uhci_stop ( uhci ) ) != 0 ) {
/* Ignore errors and attempt to reset the device anyway */
}
/* Reset device */
outw ( UHCI_USBCMD_HCRESET, uhci->regs + UHCI_USBCMD );
/* Wait for reset to complete */
for ( i = 0 ; i < UHCI_RESET_MAX_WAIT_MS ; i++ ) {
/* Check if reset is complete */
usbcmd = inw ( uhci->regs + UHCI_USBCMD );
if ( ! ( usbcmd & UHCI_USBCMD_HCRESET ) )
return 0;
/* Delay */
mdelay ( 1 );
}
DBGC ( uhci, "UHCI %s timed out waiting for reset\n", uhci->name );
return -ETIMEDOUT;
}
/******************************************************************************
*
* Transfer descriptor rings
*
******************************************************************************
*/
/**
* Allocate transfer ring
*
* @v ring Transfer ring
* @ret rc Return status code
*/
static int uhci_ring_alloc ( struct uhci_ring *ring ) {
int rc;
/* Initialise structure */
memset ( ring, 0, sizeof ( *ring ) );
/* Allocate queue head */
ring->head = malloc_phys ( sizeof ( *ring->head ), UHCI_ALIGN );
if ( ! ring->head ) {
rc = -ENOMEM;
goto err_alloc;
}
if ( ( rc = uhci_reachable ( ring->head,
sizeof ( *ring->head ) ) ) != 0 )
goto err_unreachable;
/* Initialise queue head */
ring->head->current = cpu_to_le32 ( UHCI_LINK_TERMINATE );
return 0;
err_unreachable:
free_phys ( ring->head, sizeof ( *ring->head ) );
err_alloc:
return rc;
}
/**
* Free transfer ring
*
* @v ring Transfer ring
*/
static void uhci_ring_free ( struct uhci_ring *ring ) {
unsigned int i;
/* Sanity checks */
assert ( uhci_ring_fill ( ring ) == 0 );
for ( i = 0 ; i < UHCI_RING_COUNT ; i++ )
assert ( ring->xfer[i] == NULL );
/* Free queue head */
free_phys ( ring->head, sizeof ( *ring->head ) );
}
/**
* Enqueue new transfer
*
* @v ring Transfer ring
* @v iobuf I/O buffer
* @v count Number of descriptors
* @ret rc Return status code
*/
static int uhci_enqueue ( struct uhci_ring *ring, struct io_buffer *iobuf,
unsigned int count ) {
struct uhci_transfer *xfer;
struct uhci_transfer *end;
struct uhci_transfer_descriptor *desc;
unsigned int index = ( ring->prod % UHCI_RING_COUNT );
uint32_t link;
size_t len;
int rc;
/* Sanity check */
assert ( count > 0 );
assert ( iobuf != NULL );
/* Check for space in ring */
if ( ! uhci_ring_remaining ( ring ) ) {
rc = -ENOBUFS;
goto err_ring_full;
}
/* Check for reachability of I/O buffer */
if ( ( rc = uhci_reachable ( iobuf->data, iob_len ( iobuf ) ) ) != 0 )
goto err_unreachable_iobuf;
/* Allocate transfer */
xfer = malloc ( sizeof ( *xfer ) );
if ( ! xfer ) {
rc = -ENOMEM;
goto err_alloc_xfer;
}
/* Initialise transfer */
xfer->prod = 0;
xfer->cons = 0;
xfer->len = 0;
xfer->iobuf = iobuf;
/* Allocate transfer descriptors */
len = ( count * sizeof ( xfer->desc[0] ) );
xfer->desc = malloc_phys ( len, UHCI_ALIGN );
if ( ! xfer->desc ) {
rc = -ENOMEM;
goto err_alloc_desc;
}
if ( ( rc = uhci_reachable ( xfer->desc, len ) ) != 0 )
goto err_unreachable_desc;
/* Initialise transfer descriptors */
memset ( xfer->desc, 0, len );
desc = xfer->desc;
for ( ; --count ; desc++ ) {
link = ( virt_to_phys ( desc + 1 ) | UHCI_LINK_DEPTH_FIRST );
desc->link = cpu_to_le32 ( link );
desc->flags = ring->flags;
}
desc->link = cpu_to_le32 ( UHCI_LINK_TERMINATE );
desc->flags = ( ring->flags | UHCI_FL_IOC );
/* Add to ring */
wmb();
link = virt_to_phys ( xfer->desc );
if ( uhci_ring_fill ( ring ) > 0 ) {
end = ring->end;
end->desc[ end->prod - 1 ].link = cpu_to_le32 ( link );
} else {
ring->head->current = cpu_to_le32 ( link );
}
assert ( ring->xfer[index] == NULL );
ring->xfer[index] = xfer;
ring->end = xfer;
ring->prod++;
return 0;
err_unreachable_desc:
free_phys ( xfer->desc, len );
err_alloc_desc:
free ( xfer );
err_alloc_xfer:
err_unreachable_iobuf:
err_ring_full:
return rc;
}
/**
* Describe transfer
*
* @v ring Transfer ring
* @v data Data
* @v len Length of data
* @v pid Packet ID
*/
static void uhci_describe ( struct uhci_ring *ring, void *data,
size_t len, uint8_t pid ) {
struct uhci_transfer *xfer = ring->end;
struct uhci_transfer_descriptor *desc;
size_t frag_len;
uint32_t control;
do {
/* Calculate fragment length */
frag_len = len;
if ( frag_len > ring->mtu )
frag_len = ring->mtu;
/* Populate descriptor */
desc = &xfer->desc[xfer->prod++];
if ( pid == USB_PID_IN )
desc->flags |= UHCI_FL_SPD;
control = ( ring->control | UHCI_CONTROL_PID ( pid ) |
UHCI_CONTROL_LEN ( frag_len ) );
desc->control = cpu_to_le32 ( control );
if ( data )
desc->data = virt_to_phys ( data );
wmb();
desc->status = UHCI_STATUS_ACTIVE;
/* Update data toggle */
ring->control ^= UHCI_CONTROL_TOGGLE;
/* Move to next descriptor */
data += frag_len;
len -= frag_len;
} while ( len );
}
/**
* Dequeue transfer
*
* @v ring Transfer ring
* @ret iobuf I/O buffer
*/
static struct io_buffer * uhci_dequeue ( struct uhci_ring *ring ) {
unsigned int index = ( ring->cons % UHCI_RING_COUNT );
struct io_buffer *iobuf;
struct uhci_transfer *xfer;
size_t len;
/* Sanity checks */
assert ( uhci_ring_fill ( ring ) > 0 );
/* Consume transfer */
xfer = ring->xfer[index];
assert ( xfer != NULL );
assert ( xfer->desc != NULL );
iobuf = xfer->iobuf;
assert ( iobuf != NULL );
ring->xfer[index] = NULL;
ring->cons++;
/* Free transfer descriptors */
len = ( xfer->prod * sizeof ( xfer->desc[0] ) );
free_phys ( xfer->desc, len );
/* Free transfer */
free ( xfer );
return iobuf;
}
/**
* Restart ring
*
* @v ring Transfer ring
* @v toggle Expected data toggle for next descriptor
*/
static void uhci_restart ( struct uhci_ring *ring, uint32_t toggle ) {
struct uhci_transfer *xfer;
struct uhci_transfer_descriptor *desc;
struct uhci_transfer_descriptor *first;
uint32_t link;
unsigned int i;
unsigned int j;
/* Sanity check */
assert ( ring->head->current == cpu_to_le32 ( UHCI_LINK_TERMINATE ) );
/* If ring is empty, then just update the data toggle for the
* next descriptor.
*/
if ( uhci_ring_fill ( ring ) == 0 ) {
ring->control &= ~UHCI_CONTROL_TOGGLE;
ring->control |= toggle;
return;
}
/* If expected toggle does not match the toggle in the first
* unconsumed descriptor, then invert all toggles.
*/
xfer = ring->xfer[ ring->cons % UHCI_RING_COUNT ];
assert ( xfer != NULL );
assert ( xfer->cons == 0 );
first = &xfer->desc[0];
if ( ( le32_to_cpu ( first->control ) ^ toggle ) & UHCI_CONTROL_TOGGLE){
/* Invert toggle on all unconsumed transfer descriptors */
for ( i = ring->cons ; i != ring->prod ; i++ ) {
xfer = ring->xfer[ i % UHCI_RING_COUNT ];
assert ( xfer != NULL );
assert ( xfer->cons == 0 );
for ( j = 0 ; j < xfer->prod ; j++ ) {
desc = &xfer->desc[j];
desc->control ^=
cpu_to_le32 ( UHCI_CONTROL_TOGGLE );
}
}
/* Invert toggle for next descriptor to be enqueued */
ring->control ^= UHCI_CONTROL_TOGGLE;
}
/* Restart ring at first unconsumed transfer */
link = virt_to_phys ( first );
wmb();
ring->head->current = cpu_to_le32 ( link );
}
/******************************************************************************
*
* Schedule management
*
******************************************************************************
*/
/**
* Get link value for a queue head
*
* @v queue Queue head
* @ret link Link value
*/
static inline uint32_t uhci_link_qh ( struct uhci_queue_head *queue ) {
return ( virt_to_phys ( queue ) | UHCI_LINK_TYPE_QH );
}
/**
* (Re)build asynchronous schedule
*
* @v uhci UHCI device
*/
static void uhci_async_schedule ( struct uhci_device *uhci ) {
struct uhci_endpoint *endpoint;
struct uhci_queue_head *queue;
uint32_t end;
uint32_t link;
/* Build schedule in reverse order of execution. Provided
* that we only ever add or remove single endpoints, this can
* safely run concurrently with hardware execution of the
* schedule.
*/
link = end = uhci_link_qh ( uhci->head );
list_for_each_entry_reverse ( endpoint, &uhci->async, schedule ) {
queue = endpoint->ring.head;
queue->link = cpu_to_le32 ( link );
wmb();
link = uhci_link_qh ( queue );
}
if ( link == end )
link = UHCI_LINK_TERMINATE;
uhci->head->link = cpu_to_le32 ( link );
wmb();
}
/**
* Add endpoint to asynchronous schedule
*
* @v endpoint Endpoint
*/
static void uhci_async_add ( struct uhci_endpoint *endpoint ) {
struct uhci_device *uhci = endpoint->uhci;
/* Add to end of schedule */
list_add_tail ( &endpoint->schedule, &uhci->async );
/* Rebuild schedule */
uhci_async_schedule ( uhci );
}
/**
* Remove endpoint from asynchronous schedule
*
* @v endpoint Endpoint
*/
static void uhci_async_del ( struct uhci_endpoint *endpoint ) {
struct uhci_device *uhci = endpoint->uhci;
/* Remove from schedule */
list_check_contains_entry ( endpoint, &uhci->async, schedule );
list_del ( &endpoint->schedule );
/* Rebuild schedule */
uhci_async_schedule ( uhci );
/* Delay for a whole USB frame (with a 100% safety margin) */
mdelay ( 2 );
}
/**
* (Re)build periodic schedule
*
* @v uhci UHCI device
*/
static void uhci_periodic_schedule ( struct uhci_device *uhci ) {
struct uhci_endpoint *endpoint;
struct uhci_queue_head *queue;
uint32_t link;
uint32_t end;
unsigned int max_interval;
unsigned int i;
/* Build schedule in reverse order of execution. Provided
* that we only ever add or remove single endpoints, this can
* safely run concurrently with hardware execution of the
* schedule.
*/
DBGCP ( uhci, "UHCI %s periodic schedule: ", uhci->name );
link = end = uhci_link_qh ( uhci->head );
list_for_each_entry_reverse ( endpoint, &uhci->periodic, schedule ) {
queue = endpoint->ring.head;
queue->link = cpu_to_le32 ( link );
wmb();
DBGCP ( uhci, "%s%d", ( ( link == end ) ? "" : "<-" ),
endpoint->ep->interval );
link = uhci_link_qh ( queue );
}
DBGCP ( uhci, "\n" );
/* Populate periodic frame list */
DBGCP ( uhci, "UHCI %s periodic frame list:", uhci->name );
for ( i = 0 ; i < UHCI_FRAMES ; i++ ) {
/* Calculate maximum interval (in microframes) which
* may appear as part of this frame list.
*/
if ( i == 0 ) {
/* Start of list: include all endpoints */
max_interval = -1U;
} else {
/* Calculate highest power-of-two frame interval */
max_interval = ( 1 << ( ffs ( i ) - 1 ) );
/* Convert to microframes */
max_interval <<= 3;
/* Round up to nearest 2^n-1 */
max_interval = ( ( max_interval << 1 ) - 1 );
}
/* Find first endpoint in schedule satisfying this
* maximum interval constraint.
*/
link = uhci_link_qh ( uhci->head );
list_for_each_entry ( endpoint, &uhci->periodic, schedule ) {
if ( endpoint->ep->interval <= max_interval ) {
queue = endpoint->ring.head;
link = uhci_link_qh ( queue );
DBGCP ( uhci, " %d:%d",
i, endpoint->ep->interval );
break;
}
}
uhci->frame->link[i] = cpu_to_le32 ( link );
}
wmb();
DBGCP ( uhci, "\n" );
}
/**
* Add endpoint to periodic schedule
*
* @v endpoint Endpoint
*/
static void uhci_periodic_add ( struct uhci_endpoint *endpoint ) {
struct uhci_device *uhci = endpoint->uhci;
struct uhci_endpoint *before;
unsigned int interval = endpoint->ep->interval;
/* Find first endpoint with a smaller interval */
list_for_each_entry ( before, &uhci->periodic, schedule ) {
if ( before->ep->interval < interval )
break;
}
list_add_tail ( &endpoint->schedule, &before->schedule );
/* Rebuild schedule */
uhci_periodic_schedule ( uhci );
}
/**
* Remove endpoint from periodic schedule
*
* @v endpoint Endpoint
*/
static void uhci_periodic_del ( struct uhci_endpoint *endpoint ) {
struct uhci_device *uhci = endpoint->uhci;
/* Remove from schedule */
list_check_contains_entry ( endpoint, &uhci->periodic, schedule );
list_del ( &endpoint->schedule );
/* Rebuild schedule */
uhci_periodic_schedule ( uhci );
/* Delay for a whole USB frame (with a 100% safety margin) */
mdelay ( 2 );
}
/**
* Add endpoint to appropriate schedule
*
* @v endpoint Endpoint
*/
static void uhci_schedule_add ( struct uhci_endpoint *endpoint ) {
struct usb_endpoint *ep = endpoint->ep;
unsigned int attr = ( ep->attributes & USB_ENDPOINT_ATTR_TYPE_MASK );
if ( attr == USB_ENDPOINT_ATTR_INTERRUPT ) {
uhci_periodic_add ( endpoint );
} else {
uhci_async_add ( endpoint );
}
}
/**
* Remove endpoint from appropriate schedule
*
* @v endpoint Endpoint
*/
static void uhci_schedule_del ( struct uhci_endpoint *endpoint ) {
struct usb_endpoint *ep = endpoint->ep;
unsigned int attr = ( ep->attributes & USB_ENDPOINT_ATTR_TYPE_MASK );
if ( attr == USB_ENDPOINT_ATTR_INTERRUPT ) {
uhci_periodic_del ( endpoint );
} else {
uhci_async_del ( endpoint );
}
}
/******************************************************************************
*
* Endpoint operations
*
******************************************************************************
*/
/**
* Open endpoint
*
* @v ep USB endpoint
* @ret rc Return status code
*/
static int uhci_endpoint_open ( struct usb_endpoint *ep ) {
struct usb_device *usb = ep->usb;
struct uhci_device *uhci = usb_get_hostdata ( usb );
struct uhci_endpoint *endpoint;
int rc;
/* Allocate and initialise structure */
endpoint = zalloc ( sizeof ( *endpoint ) );
if ( ! endpoint ) {
rc = -ENOMEM;
goto err_alloc;
}
endpoint->uhci = uhci;
endpoint->ep = ep;
usb_endpoint_set_hostdata ( ep, endpoint );
/* Initialise descriptor ring */
if ( ( rc = uhci_ring_alloc ( &endpoint->ring ) ) != 0 )
goto err_ring_alloc;
endpoint->ring.mtu = ep->mtu;
endpoint->ring.flags = UHCI_FL_CERR_MAX;
if ( usb->speed < USB_SPEED_FULL )
endpoint->ring.flags |= UHCI_FL_LS;
endpoint->ring.control = ( UHCI_CONTROL_DEVICE ( usb->address ) |
UHCI_CONTROL_ENDPOINT ( ep->address ) );
/* Add to list of endpoints */
list_add_tail ( &endpoint->list, &uhci->endpoints );
/* Add to schedule */
uhci_schedule_add ( endpoint );
return 0;
uhci_ring_free ( &endpoint->ring );
err_ring_alloc:
free ( endpoint );
err_alloc:
return rc;
}
/**
* Close endpoint
*
* @v ep USB endpoint
*/
static void uhci_endpoint_close ( struct usb_endpoint *ep ) {
struct uhci_endpoint *endpoint = usb_endpoint_get_hostdata ( ep );
struct io_buffer *iobuf;
/* Remove from schedule */
uhci_schedule_del ( endpoint );
/* Cancel any incomplete transfers */
while ( uhci_ring_fill ( &endpoint->ring ) ) {
iobuf = uhci_dequeue ( &endpoint->ring );
if ( iobuf )
usb_complete_err ( ep, iobuf, -ECANCELED );
}
/* Remove from list of endpoints */
list_del ( &endpoint->list );
/* Free descriptor ring */
uhci_ring_free ( &endpoint->ring );
/* Free endpoint */
free ( endpoint );
}
/**
* Reset endpoint
*
* @v ep USB endpoint
* @ret rc Return status code
*/
static int uhci_endpoint_reset ( struct usb_endpoint *ep ) {
struct uhci_endpoint *endpoint = usb_endpoint_get_hostdata ( ep );
struct uhci_ring *ring = &endpoint->ring;
/* Restart ring */
uhci_restart ( ring, 0 );
return 0;
}
/**
* Update MTU
*
* @v ep USB endpoint
* @ret rc Return status code
*/
static int uhci_endpoint_mtu ( struct usb_endpoint *ep ) {
struct uhci_endpoint *endpoint = usb_endpoint_get_hostdata ( ep );
/* Update endpoint MTU */
endpoint->ring.mtu = ep->mtu;
return 0;
}
/**
* Enqueue message transfer
*
* @v ep USB endpoint
* @v iobuf I/O buffer
* @ret rc Return status code
*/
static int uhci_endpoint_message ( struct usb_endpoint *ep,
struct io_buffer *iobuf ) {
struct uhci_endpoint *endpoint = usb_endpoint_get_hostdata ( ep );
struct uhci_ring *ring = &endpoint->ring;
struct usb_setup_packet *packet;
unsigned int count;
size_t len;
int input;
int rc;
/* Calculate number of descriptors */
assert ( iob_len ( iobuf ) >= sizeof ( *packet ) );
len = ( iob_len ( iobuf ) - sizeof ( *packet ) );
count = ( 1 /* setup stage */ +
( ( len + ring->mtu - 1 ) / ring->mtu ) /* data stage */ +
1 /* status stage */ );
/* Enqueue transfer */
if ( ( rc = uhci_enqueue ( ring, iobuf, count ) ) != 0 )
return rc;
/* Describe setup stage */
packet = iobuf->data;
ring->control &= ~UHCI_CONTROL_TOGGLE;
uhci_describe ( ring, packet, sizeof ( *packet ), USB_PID_SETUP );
iob_pull ( iobuf, sizeof ( *packet ) );
/* Describe data stage, if applicable */
assert ( ring->control & UHCI_CONTROL_TOGGLE );
input = ( packet->request & cpu_to_le16 ( USB_DIR_IN ) );
if ( len ) {
uhci_describe ( ring, iobuf->data, len,
( input ? USB_PID_IN : USB_PID_OUT ) );
}
/* Describe status stage */
ring->control |= UHCI_CONTROL_TOGGLE;
uhci_describe ( ring, NULL, 0,
( ( len && input ) ? USB_PID_OUT : USB_PID_IN ) );
/* Sanity check */
assert ( ring->end->prod == count );
return 0;
}
/**
* Enqueue stream transfer
*
* @v ep USB endpoint
* @v iobuf I/O buffer
* @v zlp Append a zero-length packet
* @ret rc Return status code
*/
static int uhci_endpoint_stream ( struct usb_endpoint *ep,
struct io_buffer *iobuf, int zlp ) {
struct uhci_endpoint *endpoint = usb_endpoint_get_hostdata ( ep );
struct uhci_ring *ring = &endpoint->ring;
unsigned int count;
size_t len;
int input;
int rc;
/* Calculate number of descriptors */
len = iob_len ( iobuf );
count = ( ( ( len + ring->mtu - 1 ) / ring->mtu ) + ( zlp ? 1 : 0 ) );
/* Enqueue transfer */
if ( ( rc = uhci_enqueue ( ring, iobuf, count ) ) != 0 )
return rc;
/* Describe data packet */
input = ( ep->address & USB_DIR_IN );
uhci_describe ( ring, iobuf->data, len,
( input ? USB_PID_IN : USB_PID_OUT ) );
/* Describe zero-length packet, if applicable */
if ( zlp )
uhci_describe ( ring, NULL, 0, USB_PID_OUT );
/* Sanity check */
assert ( ring->end->prod == count );
return 0;
}
/**
* Check if transfer is a message transfer
*
* @v xfer UHCI transfer
* @ret is_message Transfer is a message transfer
*/
static inline int uhci_is_message ( struct uhci_transfer *xfer ) {
struct uhci_transfer_descriptor *desc = &xfer->desc[0];
return ( ( desc->control & cpu_to_le32 ( UHCI_CONTROL_PID_MASK ) ) ==
cpu_to_le32 ( UHCI_CONTROL_PID ( USB_PID_SETUP ) ) );
}
/**
* Poll for completions
*
* @v endpoint Endpoint
*/
static void uhci_endpoint_poll ( struct uhci_endpoint *endpoint ) {
struct uhci_ring *ring = &endpoint->ring;
struct uhci_device *uhci = endpoint->uhci;
struct usb_endpoint *ep = endpoint->ep;
struct usb_device *usb = ep->usb;
struct uhci_transfer *xfer;
struct uhci_transfer_descriptor *desc;
struct io_buffer *iobuf;
unsigned int index;
uint32_t link;
uint32_t toggle;
uint32_t control;
uint16_t actual;
size_t len;
/* Consume all completed descriptors */
while ( uhci_ring_fill ( ring ) ) {
/* Stop if we reach an uncompleted descriptor */
index = ( ring->cons % UHCI_RING_COUNT );
xfer = ring->xfer[index];
assert ( xfer != NULL );
assert ( xfer->cons < xfer->prod );
desc = &xfer->desc[xfer->cons];
rmb();
if ( desc->status & UHCI_STATUS_ACTIVE )
break;
control = le32_to_cpu ( desc->control );
actual = le16_to_cpu ( desc->actual );
/* Update data length, if applicable */
if ( UHCI_DATA_PACKET ( control ) )
xfer->len += UHCI_ACTUAL_LEN ( actual );
/* If we have encountered an error, then deactivate
* the queue head (to prevent further hardware
* accesses to this transfer), consume the transfer,
* and report the error to the USB core.
*/
if ( desc->status & UHCI_STATUS_STALLED ) {
DBGC ( uhci, "UHCI %s %s completion %d.%d failed "
"(status %02x)\n", usb->name,
usb_endpoint_name ( ep ), index,
xfer->cons, desc->status );
link = UHCI_LINK_TERMINATE;
ring->head->current = cpu_to_le32 ( link );
wmb();
iobuf = uhci_dequeue ( ring );
usb_complete_err ( ep, iobuf, -EIO );
break;
}
/* Consume this descriptor */
xfer->cons++;
/* Check for short packets */
if ( UHCI_SHORT_PACKET ( control, actual ) ) {
/* Sanity checks */
assert ( desc->flags & UHCI_FL_SPD );
link = virt_to_phys ( desc );
assert ( ( le32_to_cpu ( ring->head->current ) &
~( UHCI_ALIGN - 1 ) ) == link );
/* If this is a message transfer, then restart
* at the status stage.
*/
if ( uhci_is_message ( xfer ) ) {
xfer->cons = ( xfer->prod - 1 );
link = virt_to_phys ( &xfer->desc[xfer->cons] );
ring->head->current = cpu_to_le32 ( link );
break;
}
/* Otherwise, this is a stream transfer.
* First, prevent further hardware access to
* this transfer.
*/
link = UHCI_LINK_TERMINATE;
ring->head->current = cpu_to_le32 ( link );
wmb();
/* Determine expected data toggle for next descriptor */
toggle = ( ( control ^ UHCI_CONTROL_TOGGLE ) &
UHCI_CONTROL_TOGGLE );
/* Consume this transfer */
len = xfer->len;
iobuf = uhci_dequeue ( ring );
/* Update packet length */
assert ( len <= iob_len ( iobuf ) );
iob_unput ( iobuf, ( iob_len ( iobuf ) - len ) );
/* Restart ring */
uhci_restart ( ring, toggle );
} else if ( xfer->cons == xfer->prod ) {
/* Completed a transfer: consume it */
len = xfer->len;
iobuf = uhci_dequeue ( ring );
assert ( len == iob_len ( iobuf ) );
} else {
/* Not a short packet and not yet complete:
* continue processing.
*/
continue;
}
/* Report completion to USB core */
usb_complete ( ep, iobuf );
}
}
/******************************************************************************
*
* Device operations
*
******************************************************************************
*/
/**
* Open device
*
* @v usb USB device
* @ret rc Return status code
*/
static int uhci_device_open ( struct usb_device *usb ) {
struct uhci_device *uhci = usb_bus_get_hostdata ( usb->port->hub->bus );
usb_set_hostdata ( usb, uhci );
return 0;
}
/**
* Close device
*
* @v usb USB device
*/
static void uhci_device_close ( struct usb_device *usb ) {
struct uhci_device *uhci = usb_get_hostdata ( usb );
struct usb_bus *bus = uhci->bus;
/* Free device address, if assigned */
if ( usb->address )
usb_free_address ( bus, usb->address );
}
/**
* Assign device address
*
* @v usb USB device
* @ret rc Return status code
*/
static int uhci_device_address ( struct usb_device *usb ) {
struct uhci_device *uhci = usb_get_hostdata ( usb );
struct usb_bus *bus = uhci->bus;
struct usb_endpoint *ep0 = usb_endpoint ( usb, USB_EP0_ADDRESS );
struct uhci_endpoint *endpoint0 = usb_endpoint_get_hostdata ( ep0 );
int address;
int rc;
/* Sanity checks */
assert ( usb->address == 0 );
assert ( ep0 != NULL );
/* Allocate device address */
address = usb_alloc_address ( bus );
if ( address < 0 ) {
rc = address;
DBGC ( uhci, "UHCI %s could not allocate address: %s\n",
usb->name, strerror ( rc ) );
goto err_alloc_address;
}
/* Set address */
if ( ( rc = usb_set_address ( usb, address ) ) != 0 )
goto err_set_address;
/* Update device address */
usb->address = address;
endpoint0->ring.control |= UHCI_CONTROL_DEVICE ( address );
return 0;
err_set_address:
usb_free_address ( bus, address );
err_alloc_address:
return rc;
}
/******************************************************************************
*
* Hub operations
*
******************************************************************************
*/
/**
* Open hub
*
* @v hub USB hub
* @ret rc Return status code
*/
static int uhci_hub_open ( struct usb_hub *hub __unused ) {
/* Nothing to do */
return 0;
}
/**
* Close hub
*
* @v hub USB hub
*/
static void uhci_hub_close ( struct usb_hub *hub __unused ) {
/* Nothing to do */
}
/******************************************************************************
*
* Root hub operations
*
******************************************************************************
*/
/**
* Open root hub
*
* @v hub USB hub
* @ret rc Return status code
*/
static int uhci_root_open ( struct usb_hub *hub __unused) {
/* Nothing to do */
return 0;
}
/**
* Close root hub
*
* @v hub USB hub
*/
static void uhci_root_close ( struct usb_hub *hub __unused ) {
/* Nothing to do */
}
/**
* Enable port
*
* @v hub USB hub
* @v port USB port
* @ret rc Return status code
*/
static int uhci_root_enable ( struct usb_hub *hub, struct usb_port *port ) {
struct uhci_device *uhci = usb_hub_get_drvdata ( hub );
uint16_t portsc;
unsigned int i;
/* Reset port */
portsc = inw ( uhci->regs + UHCI_PORTSC ( port->address ) );
portsc |= UHCI_PORTSC_PR;
outw ( portsc, uhci->regs + UHCI_PORTSC ( port->address ) );
mdelay ( USB_RESET_DELAY_MS );
portsc &= ~UHCI_PORTSC_PR;
outw ( portsc, uhci->regs + UHCI_PORTSC ( port->address ) );
mdelay ( USB_RESET_RECOVER_DELAY_MS );
/* Enable port */
portsc |= UHCI_PORTSC_PED;
outw ( portsc, uhci->regs + UHCI_PORTSC ( port->address ) );
mdelay ( USB_RESET_RECOVER_DELAY_MS );
/* Wait for port to become enabled */
for ( i = 0 ; i < UHCI_PORT_ENABLE_MAX_WAIT_MS ; i++ ) {
/* Check port status */
portsc = inw ( uhci->regs + UHCI_PORTSC ( port->address ) );
if ( portsc & UHCI_PORTSC_PED )
return 0;
/* Delay */
mdelay ( 1 );
}
DBGC ( uhci, "UHCI %s-%d timed out waiting for port to enable "
"(status %04x)\n", uhci->name, port->address, portsc );
return -ETIMEDOUT;
}
/**
* Disable port
*
* @v hub USB hub
* @v port USB port
* @ret rc Return status code
*/
static int uhci_root_disable ( struct usb_hub *hub, struct usb_port *port ) {
struct uhci_device *uhci = usb_hub_get_drvdata ( hub );
uint16_t portsc;
/* Disable port */
portsc = inw ( uhci->regs + UHCI_PORTSC ( port->address ) );
portsc &= ~UHCI_PORTSC_PED;
outw ( portsc, uhci->regs + UHCI_PORTSC ( port->address ) );
return 0;
}
/**
* Update root hub port speed
*
* @v hub USB hub
* @v port USB port
* @ret rc Return status code
*/
static int uhci_root_speed ( struct usb_hub *hub, struct usb_port *port ) {
struct uhci_device *uhci = usb_hub_get_drvdata ( hub );
struct pci_device pci;
uint16_t portsc;
unsigned int speed;
/* Read port status */
portsc = inw ( uhci->regs + UHCI_PORTSC ( port->address ) );
if ( ! ( portsc & UHCI_PORTSC_CCS ) ) {
/* Port not connected */
speed = USB_SPEED_NONE;
} else if ( uhci->companion &&
! find_usb_bus_by_location ( BUS_TYPE_PCI,
uhci->companion ) ) {
/* Defer connection detection until companion
* controller has been enumerated.
*/
pci_init ( &pci, uhci->companion );
DBGC ( uhci, "UHCI %s-%d deferring for companion " PCI_FMT "\n",
uhci->name, port->address, PCI_ARGS ( &pci ) );
speed = USB_SPEED_NONE;
} else if ( portsc & UHCI_PORTSC_LS ) {
/* Low-speed device */
speed = USB_SPEED_LOW;
} else {
/* Full-speed device */
speed = USB_SPEED_FULL;
}
port->speed = speed;
/* Record disconnections and clear changes */
port->disconnected |= ( portsc & UHCI_PORTSC_CSC );
outw ( portsc, uhci->regs + UHCI_PORTSC ( port->address ) );
return 0;
}
/**
* Clear transaction translator buffer
*
* @v hub USB hub
* @v port USB port
* @v ep USB endpoint
* @ret rc Return status code
*/
static int uhci_root_clear_tt ( struct usb_hub *hub, struct usb_port *port,
struct usb_endpoint *ep ) {
struct uhci_device *uhci = usb_hub_get_drvdata ( hub );
/* Should never be called; this is a root hub */
DBGC ( uhci, "UHCI %s-%d nonsensical CLEAR_TT for %s %s\n", uhci->name,
port->address, ep->usb->name, usb_endpoint_name ( ep ) );
return -ENOTSUP;
}
/**
* Poll for port status changes
*
* @v hub USB hub
* @v port USB port
*/
static void uhci_root_poll ( struct usb_hub *hub, struct usb_port *port ) {
struct uhci_device *uhci = usb_hub_get_drvdata ( hub );
uint16_t portsc;
uint16_t change;
/* Do nothing unless something has changed */
portsc = inw ( uhci->regs + UHCI_PORTSC ( port->address ) );
change = ( portsc & UHCI_PORTSC_CHANGE );
if ( ! change )
return;
/* Record disconnections and clear changes */
port->disconnected |= ( portsc & UHCI_PORTSC_CSC );
outw ( portsc, uhci->regs + UHCI_PORTSC ( port->address ) );
/* Report port status change */
usb_port_changed ( port );
}
/******************************************************************************
*
* Bus operations
*
******************************************************************************
*/
/**
* Open USB bus
*
* @v bus USB bus
* @ret rc Return status code
*/
static int uhci_bus_open ( struct usb_bus *bus ) {
struct uhci_device *uhci = usb_bus_get_hostdata ( bus );
int rc;
/* Sanity checks */
assert ( list_empty ( &uhci->async ) );
assert ( list_empty ( &uhci->periodic ) );
/* Allocate and initialise asynchronous queue head */
uhci->head = malloc_phys ( sizeof ( *uhci->head ), UHCI_ALIGN );
if ( ! uhci->head ) {
rc = -ENOMEM;
goto err_alloc_head;
}
if ( ( rc = uhci_reachable ( uhci->head, sizeof ( *uhci->head ) ) ) !=0)
goto err_unreachable_head;
memset ( uhci->head, 0, sizeof ( *uhci->head ) );
uhci->head->current = cpu_to_le32 ( UHCI_LINK_TERMINATE );
uhci_async_schedule ( uhci );
/* Allocate periodic frame list */
uhci->frame = malloc_phys ( sizeof ( *uhci->frame ),
sizeof ( *uhci->frame ) );
if ( ! uhci->frame ) {
rc = -ENOMEM;
goto err_alloc_frame;
}
if ( ( rc = uhci_reachable ( uhci->frame,
sizeof ( *uhci->frame ) ) ) != 0 )
goto err_unreachable_frame;
uhci_periodic_schedule ( uhci );
outl ( virt_to_phys ( uhci->frame ), uhci->regs + UHCI_FLBASEADD );
/* Start controller */
uhci_run ( uhci );
return 0;
uhci_stop ( uhci );
err_unreachable_frame:
free_phys ( uhci->frame, sizeof ( *uhci->frame ) );
err_alloc_frame:
err_unreachable_head:
free_phys ( uhci->head, sizeof ( *uhci->head ) );
err_alloc_head:
return rc;
}
/**
* Close USB bus
*
* @v bus USB bus
*/
static void uhci_bus_close ( struct usb_bus *bus ) {
struct uhci_device *uhci = usb_bus_get_hostdata ( bus );
/* Sanity checks */
assert ( list_empty ( &uhci->async ) );
assert ( list_empty ( &uhci->periodic ) );
/* Stop controller */
uhci_stop ( uhci );
/* Free periodic frame list */
free_phys ( uhci->frame, sizeof ( *uhci->frame ) );
/* Free asynchronous schedule */
free_phys ( uhci->head, sizeof ( *uhci->head ) );
}
/**
* Poll USB bus
*
* @v bus USB bus
*/
static void uhci_bus_poll ( struct usb_bus *bus ) {
struct uhci_device *uhci = usb_bus_get_hostdata ( bus );
struct usb_hub *hub = bus->hub;
struct uhci_endpoint *endpoint;
unsigned int i;
/* UHCI defers interrupts (including short packet detection)
* until the end of the frame. This can result in bulk IN
* endpoints remaining halted for much of the time, waiting
* for software action to reset the data toggles. We
* therefore ignore USBSTS and unconditionally poll all
* endpoints for completed transfer descriptors.
*
* As with EHCI, we trust that completion handlers are minimal
* and will not do anything that could plausibly affect the
* endpoint list itself.
*/
list_for_each_entry ( endpoint, &uhci->endpoints, list )
uhci_endpoint_poll ( endpoint );
/* UHCI provides no single bit to indicate that a port status
* change has occurred. We therefore unconditionally iterate
* over all ports looking for status changes.
*/
for ( i = 1 ; i <= UHCI_PORTS ; i++ )
uhci_root_poll ( hub, usb_port ( hub, i ) );
}
/******************************************************************************
*
* PCI interface
*
******************************************************************************
*/
/** USB host controller operations */
static struct usb_host_operations uhci_operations = {
.endpoint = {
.open = uhci_endpoint_open,
.close = uhci_endpoint_close,
.reset = uhci_endpoint_reset,
.mtu = uhci_endpoint_mtu,
.message = uhci_endpoint_message,
.stream = uhci_endpoint_stream,
},
.device = {
.open = uhci_device_open,
.close = uhci_device_close,
.address = uhci_device_address,
},
.bus = {
.open = uhci_bus_open,
.close = uhci_bus_close,
.poll = uhci_bus_poll,
},
.hub = {
.open = uhci_hub_open,
.close = uhci_hub_close,
},
.root = {
.open = uhci_root_open,
.close = uhci_root_close,
.enable = uhci_root_enable,
.disable = uhci_root_disable,
.speed = uhci_root_speed,
.clear_tt = uhci_root_clear_tt,
},
};
/**
* Locate EHCI companion controller (when no EHCI support is present)
*
* @v pci PCI device
* @ret busdevfn EHCI companion controller bus:dev.fn (if any)
*/
__weak unsigned int ehci_companion ( struct pci_device *pci __unused ) {
return 0;
}
/**
* Probe PCI device
*
* @v pci PCI device
* @ret rc Return status code
*/
static int uhci_probe ( struct pci_device *pci ) {
struct uhci_device *uhci;
struct usb_port *port;
unsigned int i;
int rc;
/* Allocate and initialise structure */
uhci = zalloc ( sizeof ( *uhci ) );
if ( ! uhci ) {
rc = -ENOMEM;
goto err_alloc;
}
uhci->name = pci->dev.name;
INIT_LIST_HEAD ( &uhci->endpoints );
INIT_LIST_HEAD ( &uhci->async );
INIT_LIST_HEAD ( &uhci->periodic );
/* Fix up PCI device */
adjust_pci_device ( pci );
/* Identify EHCI companion controller, if any */
uhci->companion = ehci_companion ( pci );
/* Claim ownership from BIOS. (There is no release mechanism
* for UHCI.)
*/
pci_write_config_word ( pci, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT );
/* Map registers */
uhci->regs = pci->ioaddr;
if ( ! uhci->regs ) {
rc = -ENODEV;
goto err_ioremap;
}
/* Reset device */
if ( ( rc = uhci_reset ( uhci ) ) != 0 )
goto err_reset;
/* Allocate USB bus */
uhci->bus = alloc_usb_bus ( &pci->dev, UHCI_PORTS, UHCI_MTU,
&uhci_operations );
if ( ! uhci->bus ) {
rc = -ENOMEM;
goto err_alloc_bus;
}
usb_bus_set_hostdata ( uhci->bus, uhci );
usb_hub_set_drvdata ( uhci->bus->hub, uhci );
/* Set port protocols */
for ( i = 1 ; i <= UHCI_PORTS ; i++ ) {
port = usb_port ( uhci->bus->hub, i );
port->protocol = USB_PROTO_2_0;
}
/* Register USB bus */
if ( ( rc = register_usb_bus ( uhci->bus ) ) != 0 )
goto err_register;
pci_set_drvdata ( pci, uhci );
return 0;
unregister_usb_bus ( uhci->bus );
err_register:
free_usb_bus ( uhci->bus );
err_alloc_bus:
uhci_reset ( uhci );
err_reset:
err_ioremap:
free ( uhci );
err_alloc:
return rc;
}
/**
* Remove PCI device
*
* @v pci PCI device
*/
static void uhci_remove ( struct pci_device *pci ) {
struct uhci_device *uhci = pci_get_drvdata ( pci );
struct usb_bus *bus = uhci->bus;
unregister_usb_bus ( bus );
assert ( list_empty ( &uhci->async ) );
assert ( list_empty ( &uhci->periodic ) );
free_usb_bus ( bus );
uhci_reset ( uhci );
free ( uhci );
}
/** UHCI PCI device IDs */
static struct pci_device_id uhci_ids[] = {
PCI_ROM ( 0xffff, 0xffff, "uhci", "UHCI", 0 ),
};
/** UHCI PCI driver */
struct pci_driver uhci_driver __pci_driver = {
.ids = uhci_ids,
.id_count = ( sizeof ( uhci_ids ) / sizeof ( uhci_ids[0] ) ),
.class = PCI_CLASS_ID ( PCI_CLASS_SERIAL, PCI_CLASS_SERIAL_USB,
PCI_CLASS_SERIAL_USB_UHCI ),
.probe = uhci_probe,
.remove = uhci_remove,
};