blob: 80442ab83f926a03ee4df03adb12614dd2d23ece [file] [log] [blame]
/*
* Copyright (C) 2012 Michael Brown <mbrown@fensystems.co.uk>.
*
* (EEPROM code originally implemented for rtl8139.c)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
* You can also choose to distribute this program under the terms of
* the Unmodified Binary Distribution Licence (as given in the file
* COPYING.UBDL), provided that you have satisfied its requirements.
*/
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <byteswap.h>
#include <ipxe/netdevice.h>
#include <ipxe/ethernet.h>
#include <ipxe/if_ether.h>
#include <ipxe/iobuf.h>
#include <ipxe/malloc.h>
#include <ipxe/pci.h>
#include <ipxe/dma.h>
#include <ipxe/nvs.h>
#include <ipxe/threewire.h>
#include <ipxe/bitbash.h>
#include <ipxe/mii.h>
#include "realtek.h"
/** @file
*
* Realtek 10/100/1000 network card driver
*
* Based on the following datasheets:
*
* http://www.datasheetarchive.com/dl/Datasheets-8/DSA-153536.pdf
* http://www.datasheetarchive.com/indexdl/Datasheet-028/DSA00494723.pdf
*/
/******************************************************************************
*
* Debugging
*
******************************************************************************
*/
/**
* Dump all registers (for debugging)
*
* @v rtl Realtek device
*/
static __attribute__ (( unused )) void realtek_dump ( struct realtek_nic *rtl ){
uint8_t regs[256];
unsigned int i;
/* Do nothing unless debug output is enabled */
if ( ! DBG_LOG )
return;
/* Dump registers (via byte accesses; may not work for all registers) */
for ( i = 0 ; i < sizeof ( regs ) ; i++ )
regs[i] = readb ( rtl->regs + i );
DBGC ( rtl, "REALTEK %p register dump:\n", rtl );
DBGC_HDA ( rtl, 0, regs, sizeof ( regs ) );
}
/******************************************************************************
*
* EEPROM interface
*
******************************************************************************
*/
/** Pin mapping for SPI bit-bashing interface */
static const uint8_t realtek_eeprom_bits[] = {
[SPI_BIT_SCLK] = RTL_9346CR_EESK,
[SPI_BIT_MOSI] = RTL_9346CR_EEDI,
[SPI_BIT_MISO] = RTL_9346CR_EEDO,
[SPI_BIT_SS(0)] = RTL_9346CR_EECS,
};
/**
* Open bit-bashing interface
*
* @v basher Bit-bashing interface
*/
static void realtek_spi_open_bit ( struct bit_basher *basher ) {
struct realtek_nic *rtl = container_of ( basher, struct realtek_nic,
spibit.basher );
/* Enable EEPROM access */
writeb ( RTL_9346CR_EEM_EEPROM, rtl->regs + RTL_9346CR );
readb ( rtl->regs + RTL_9346CR ); /* Ensure write reaches chip */
}
/**
* Close bit-bashing interface
*
* @v basher Bit-bashing interface
*/
static void realtek_spi_close_bit ( struct bit_basher *basher ) {
struct realtek_nic *rtl = container_of ( basher, struct realtek_nic,
spibit.basher );
/* Disable EEPROM access */
writeb ( RTL_9346CR_EEM_NORMAL, rtl->regs + RTL_9346CR );
readb ( rtl->regs + RTL_9346CR ); /* Ensure write reaches chip */
}
/**
* Read input bit
*
* @v basher Bit-bashing interface
* @v bit_id Bit number
* @ret zero Input is a logic 0
* @ret non-zero Input is a logic 1
*/
static int realtek_spi_read_bit ( struct bit_basher *basher,
unsigned int bit_id ) {
struct realtek_nic *rtl = container_of ( basher, struct realtek_nic,
spibit.basher );
uint8_t mask = realtek_eeprom_bits[bit_id];
uint8_t reg;
DBG_DISABLE ( DBGLVL_IO );
reg = readb ( rtl->regs + RTL_9346CR );
DBG_ENABLE ( DBGLVL_IO );
return ( reg & mask );
}
/**
* Set/clear output bit
*
* @v basher Bit-bashing interface
* @v bit_id Bit number
* @v data Value to write
*/
static void realtek_spi_write_bit ( struct bit_basher *basher,
unsigned int bit_id, unsigned long data ) {
struct realtek_nic *rtl = container_of ( basher, struct realtek_nic,
spibit.basher );
uint8_t mask = realtek_eeprom_bits[bit_id];
uint8_t reg;
DBG_DISABLE ( DBGLVL_IO );
reg = readb ( rtl->regs + RTL_9346CR );
reg &= ~mask;
reg |= ( data & mask );
writeb ( reg, rtl->regs + RTL_9346CR );
readb ( rtl->regs + RTL_9346CR ); /* Ensure write reaches chip */
DBG_ENABLE ( DBGLVL_IO );
}
/** SPI bit-bashing interface */
static struct bit_basher_operations realtek_basher_ops = {
.open = realtek_spi_open_bit,
.close = realtek_spi_close_bit,
.read = realtek_spi_read_bit,
.write = realtek_spi_write_bit,
};
/**
* Initialise EEPROM
*
* @v netdev Network device
* @ret rc Return status code
*/
static int realtek_init_eeprom ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
uint16_t id;
int rc;
/* Initialise SPI bit-bashing interface */
rtl->spibit.basher.op = &realtek_basher_ops;
rtl->spibit.bus.mode = SPI_MODE_THREEWIRE;
init_spi_bit_basher ( &rtl->spibit );
/* Detect EEPROM type and initialise three-wire device */
if ( readl ( rtl->regs + RTL_RCR ) & RTL_RCR_9356SEL ) {
DBGC ( rtl, "REALTEK %p EEPROM is a 93C56\n", rtl );
init_at93c56 ( &rtl->eeprom, 16 );
} else {
DBGC ( rtl, "REALTEK %p EEPROM is a 93C46\n", rtl );
init_at93c46 ( &rtl->eeprom, 16 );
}
/* Check for EEPROM presence. Some onboard NICs will have no
* EEPROM connected, with the BIOS being responsible for
* programming the initial register values.
*/
if ( ( rc = nvs_read ( &rtl->eeprom.nvs, RTL_EEPROM_ID,
&id, sizeof ( id ) ) ) != 0 ) {
DBGC ( rtl, "REALTEK %p could not read EEPROM ID: %s\n",
rtl, strerror ( rc ) );
return rc;
}
if ( id != cpu_to_le16 ( RTL_EEPROM_ID_MAGIC ) ) {
DBGC ( rtl, "REALTEK %p EEPROM ID incorrect (%#04x); assuming "
"no EEPROM\n", rtl, le16_to_cpu ( id ) );
return -ENODEV;
}
/* Initialise space for non-volatile options, if available
*
* We use offset 0x40 (i.e. address 0x20), length 0x40. This
* block is marked as VPD in the Realtek datasheets, so we use
* it only if we detect that the card is not supporting VPD.
*/
if ( readb ( rtl->regs + RTL_CONFIG1 ) & RTL_CONFIG1_VPD ) {
DBGC ( rtl, "REALTEK %p EEPROM in use for VPD; cannot use "
"for options\n", rtl );
} else {
nvo_init ( &rtl->nvo, &rtl->eeprom.nvs, RTL_EEPROM_VPD,
RTL_EEPROM_VPD_LEN, NULL, &netdev->refcnt );
}
return 0;
}
/******************************************************************************
*
* MII interface
*
******************************************************************************
*/
/**
* Read from MII register
*
* @v mdio MII interface
* @v phy PHY address
* @v reg Register address
* @ret value Data read, or negative error
*/
static int realtek_mii_read ( struct mii_interface *mdio,
unsigned int phy __unused, unsigned int reg ) {
struct realtek_nic *rtl =
container_of ( mdio, struct realtek_nic, mdio );
unsigned int i;
uint32_t value;
/* Fail if PHYAR register is not present */
if ( ! rtl->have_phy_regs )
return -ENOTSUP;
/* Initiate read */
writel ( RTL_PHYAR_VALUE ( 0, reg, 0 ), rtl->regs + RTL_PHYAR );
/* Wait for read to complete */
for ( i = 0 ; i < RTL_MII_MAX_WAIT_US ; i++ ) {
/* If read is not complete, delay 1us and retry */
value = readl ( rtl->regs + RTL_PHYAR );
if ( ! ( value & RTL_PHYAR_FLAG ) ) {
udelay ( 1 );
continue;
}
/* Return register value */
return ( RTL_PHYAR_DATA ( value ) );
}
DBGC ( rtl, "REALTEK %p timed out waiting for MII read\n", rtl );
return -ETIMEDOUT;
}
/**
* Write to MII register
*
* @v mdio MII interface
* @v phy PHY address
* @v reg Register address
* @v data Data to write
* @ret rc Return status code
*/
static int realtek_mii_write ( struct mii_interface *mdio,
unsigned int phy __unused, unsigned int reg,
unsigned int data ) {
struct realtek_nic *rtl =
container_of ( mdio, struct realtek_nic, mdio );
unsigned int i;
/* Fail if PHYAR register is not present */
if ( ! rtl->have_phy_regs )
return -ENOTSUP;
/* Initiate write */
writel ( RTL_PHYAR_VALUE ( RTL_PHYAR_FLAG, reg, data ),
rtl->regs + RTL_PHYAR );
/* Wait for write to complete */
for ( i = 0 ; i < RTL_MII_MAX_WAIT_US ; i++ ) {
/* If write is not complete, delay 1us and retry */
if ( readl ( rtl->regs + RTL_PHYAR ) & RTL_PHYAR_FLAG ) {
udelay ( 1 );
continue;
}
return 0;
}
DBGC ( rtl, "REALTEK %p timed out waiting for MII write\n", rtl );
return -ETIMEDOUT;
}
/** Realtek MII operations */
static struct mii_operations realtek_mii_operations = {
.read = realtek_mii_read,
.write = realtek_mii_write,
};
/******************************************************************************
*
* Device reset
*
******************************************************************************
*/
/**
* Reset hardware
*
* @v rtl Realtek device
* @ret rc Return status code
*/
static int realtek_reset ( struct realtek_nic *rtl ) {
unsigned int i;
/* Issue reset */
writeb ( RTL_CR_RST, rtl->regs + RTL_CR );
/* Wait for reset to complete */
for ( i = 0 ; i < RTL_RESET_MAX_WAIT_MS ; i++ ) {
/* If reset is not complete, delay 1ms and retry */
if ( readb ( rtl->regs + RTL_CR ) & RTL_CR_RST ) {
mdelay ( 1 );
continue;
}
return 0;
}
DBGC ( rtl, "REALTEK %p timed out waiting for reset\n", rtl );
return -ETIMEDOUT;
}
/**
* Configure PHY for Gigabit operation
*
* @v rtl Realtek device
* @ret rc Return status code
*/
static int realtek_phy_speed ( struct realtek_nic *rtl ) {
int ctrl1000;
int rc;
/* Read CTRL1000 register */
ctrl1000 = mii_read ( &rtl->mii, MII_CTRL1000 );
if ( ctrl1000 < 0 ) {
rc = ctrl1000;
DBGC ( rtl, "REALTEK %p could not read CTRL1000: %s\n",
rtl, strerror ( rc ) );
return rc;
}
/* Advertise 1000Mbps speeds */
ctrl1000 |= ( ADVERTISE_1000FULL | ADVERTISE_1000HALF );
if ( ( rc = mii_write ( &rtl->mii, MII_CTRL1000, ctrl1000 ) ) != 0 ) {
DBGC ( rtl, "REALTEK %p could not write CTRL1000: %s\n",
rtl, strerror ( rc ) );
return rc;
}
return 0;
}
/**
* Reset PHY
*
* @v rtl Realtek device
* @ret rc Return status code
*/
static int realtek_phy_reset ( struct realtek_nic *rtl ) {
int rc;
/* Do nothing if we have no separate PHY register access */
if ( ! rtl->have_phy_regs )
return 0;
/* Perform MII reset */
if ( ( rc = mii_reset ( &rtl->mii ) ) != 0 ) {
DBGC ( rtl, "REALTEK %p could not reset MII: %s\n",
rtl, strerror ( rc ) );
return rc;
}
/* Some cards (e.g. RTL8169SC) do not advertise Gigabit by
* default. Try to enable advertisement of Gigabit speeds.
*/
if ( ( rc = realtek_phy_speed ( rtl ) ) != 0 ) {
/* Ignore failures, since the register may not be
* present on non-Gigabit PHYs (e.g. RTL8101).
*/
}
/* Some cards (e.g. RTL8211B) have a hardware errata that
* requires the MII_MMD_DATA register to be cleared before the
* link will come up.
*/
if ( ( rc = mii_write ( &rtl->mii, MII_MMD_DATA, 0 ) ) != 0 ) {
/* Ignore failures, since the register may not be
* present on all PHYs.
*/
}
/* Restart autonegotiation */
if ( ( rc = mii_restart ( &rtl->mii ) ) != 0 ) {
DBGC ( rtl, "REALTEK %p could not restart MII: %s\n",
rtl, strerror ( rc ) );
return rc;
}
return 0;
}
/******************************************************************************
*
* Link state
*
******************************************************************************
*/
/**
* Check link state
*
* @v netdev Network device
*/
static void realtek_check_link ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
uint8_t phystatus;
uint8_t msr;
int link_up;
/* Determine link state */
if ( rtl->have_phy_regs ) {
mii_dump ( &rtl->mii );
phystatus = readb ( rtl->regs + RTL_PHYSTATUS );
link_up = ( phystatus & RTL_PHYSTATUS_LINKSTS );
DBGC ( rtl, "REALTEK %p PHY status is %02x (%s%s%s%s%s%s, "
"Link%s, %sDuplex)\n", rtl, phystatus,
( ( phystatus & RTL_PHYSTATUS_ENTBI ) ? "TBI" : "GMII" ),
( ( phystatus & RTL_PHYSTATUS_TXFLOW ) ?
", TxFlow" : "" ),
( ( phystatus & RTL_PHYSTATUS_RXFLOW ) ?
", RxFlow" : "" ),
( ( phystatus & RTL_PHYSTATUS_1000MF ) ?
", 1000Mbps" : "" ),
( ( phystatus & RTL_PHYSTATUS_100M ) ?
", 100Mbps" : "" ),
( ( phystatus & RTL_PHYSTATUS_10M ) ?
", 10Mbps" : "" ),
( ( phystatus & RTL_PHYSTATUS_LINKSTS ) ?
"Up" : "Down" ),
( ( phystatus & RTL_PHYSTATUS_FULLDUP ) ?
"Full" : "Half" ) );
} else {
msr = readb ( rtl->regs + RTL_MSR );
link_up = ( ! ( msr & RTL_MSR_LINKB ) );
DBGC ( rtl, "REALTEK %p media status is %02x (Link%s, "
"%dMbps%s%s%s%s%s)\n", rtl, msr,
( ( msr & RTL_MSR_LINKB ) ? "Down" : "Up" ),
( ( msr & RTL_MSR_SPEED_10 ) ? 10 : 100 ),
( ( msr & RTL_MSR_TXFCE ) ? ", TxFlow" : "" ),
( ( msr & RTL_MSR_RXFCE ) ? ", RxFlow" : "" ),
( ( msr & RTL_MSR_AUX_STATUS ) ? ", AuxPwr" : "" ),
( ( msr & RTL_MSR_TXPF ) ? ", TxPause" : "" ),
( ( msr & RTL_MSR_RXPF ) ? ", RxPause" : "" ) );
}
/* Report link state */
if ( link_up ) {
netdev_link_up ( netdev );
} else {
netdev_link_down ( netdev );
}
}
/******************************************************************************
*
* Network device interface
*
******************************************************************************
*/
/**
* Create receive buffer (legacy mode)
*
* @v rtl Realtek device
* @ret rc Return status code
*/
static int realtek_create_buffer ( struct realtek_nic *rtl ) {
struct realtek_rx_buffer *rxbuf = &rtl->rxbuf;
size_t len = ( RTL_RXBUF_LEN + RTL_RXBUF_PAD );
/* Do nothing unless in legacy mode */
if ( ! rtl->legacy )
return 0;
/* Allocate buffer */
rxbuf->data = dma_alloc ( rtl->dma, &rxbuf->map, len,
RTL_RXBUF_ALIGN );
if ( ! rxbuf->data )
return -ENOMEM;
/* Program buffer address */
writel ( dma ( &rxbuf->map, rxbuf->data ), rtl->regs + RTL_RBSTART );
DBGC ( rtl, "REALTEK %p receive buffer is at [%08lx,%08lx,%08lx)\n",
rtl, virt_to_phys ( rxbuf->data ),
( virt_to_phys ( rxbuf->data ) + RTL_RXBUF_LEN ),
( virt_to_phys ( rxbuf->data ) + len ) );
return 0;
}
/**
* Destroy receive buffer (legacy mode)
*
* @v rtl Realtek device
*/
static void realtek_destroy_buffer ( struct realtek_nic *rtl ) {
struct realtek_rx_buffer *rxbuf = &rtl->rxbuf;
size_t len = ( RTL_RXBUF_LEN + RTL_RXBUF_PAD );
/* Do nothing unless in legacy mode */
if ( ! rtl->legacy )
return;
/* Clear buffer address */
writel ( 0, rtl->regs + RTL_RBSTART );
/* Free buffer */
dma_free ( &rxbuf->map, rxbuf->data, len );
rxbuf->data = NULL;
rxbuf->offset = 0;
}
/**
* Create descriptor ring
*
* @v rtl Realtek device
* @v ring Descriptor ring
* @ret rc Return status code
*/
static int realtek_create_ring ( struct realtek_nic *rtl,
struct realtek_ring *ring ) {
physaddr_t address;
/* Do nothing in legacy mode */
if ( rtl->legacy )
return 0;
/* Allocate descriptor ring */
ring->desc = dma_alloc ( rtl->dma, &ring->map, ring->len,
RTL_RING_ALIGN );
if ( ! ring->desc )
return -ENOMEM;
/* Initialise descriptor ring */
memset ( ring->desc, 0, ring->len );
/* Program ring address */
address = dma ( &ring->map, ring->desc );
writel ( ( ( ( uint64_t ) address ) >> 32 ),
rtl->regs + ring->reg + 4 );
writel ( ( address & 0xffffffffUL ), rtl->regs + ring->reg );
DBGC ( rtl, "REALTEK %p ring %02x is at [%08lx,%08lx)\n",
rtl, ring->reg, virt_to_phys ( ring->desc ),
( virt_to_phys ( ring->desc ) + ring->len ) );
return 0;
}
/**
* Destroy descriptor ring
*
* @v rtl Realtek device
* @v ring Descriptor ring
*/
static void realtek_destroy_ring ( struct realtek_nic *rtl,
struct realtek_ring *ring ) {
/* Reset producer and consumer counters */
ring->prod = 0;
ring->cons = 0;
/* Do nothing more if in legacy mode */
if ( rtl->legacy )
return;
/* Clear ring address */
writel ( 0, rtl->regs + ring->reg );
writel ( 0, rtl->regs + ring->reg + 4 );
/* Free descriptor ring */
dma_free ( &ring->map, ring->desc, ring->len );
ring->desc = NULL;
}
/**
* Refill receive descriptor ring
*
* @v rtl Realtek device
*/
static void realtek_refill_rx ( struct realtek_nic *rtl ) {
struct realtek_descriptor *rx;
struct io_buffer *iobuf;
unsigned int rx_idx;
int is_last;
/* Do nothing in legacy mode */
if ( rtl->legacy )
return;
while ( ( rtl->rx.prod - rtl->rx.cons ) < RTL_NUM_RX_DESC ) {
/* Allocate I/O buffer */
iobuf = alloc_rx_iob ( RTL_RX_MAX_LEN, rtl->dma );
if ( ! iobuf ) {
/* Wait for next refill */
return;
}
/* Get next receive descriptor */
rx_idx = ( rtl->rx.prod++ % RTL_NUM_RX_DESC );
is_last = ( rx_idx == ( RTL_NUM_RX_DESC - 1 ) );
rx = &rtl->rx.desc[rx_idx];
/* Populate receive descriptor */
rx->address = cpu_to_le64 ( iob_dma ( iobuf ) );
rx->length = cpu_to_le16 ( RTL_RX_MAX_LEN );
wmb();
rx->flags = ( cpu_to_le16 ( RTL_DESC_OWN ) |
( is_last ? cpu_to_le16 ( RTL_DESC_EOR ) : 0 ) );
wmb();
/* Record I/O buffer */
assert ( rtl->rx_iobuf[rx_idx] == NULL );
rtl->rx_iobuf[rx_idx] = iobuf;
DBGC2 ( rtl, "REALTEK %p RX %d is [%lx,%lx)\n",
rtl, rx_idx, virt_to_phys ( iobuf->data ),
( virt_to_phys ( iobuf->data ) + RTL_RX_MAX_LEN ) );
}
}
/**
* Open network device
*
* @v netdev Network device
* @ret rc Return status code
*/
static int realtek_open ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
uint32_t tcr;
uint32_t rcr;
int rc;
/* Create transmit descriptor ring */
if ( ( rc = realtek_create_ring ( rtl, &rtl->tx ) ) != 0 )
goto err_create_tx;
/* Create receive descriptor ring */
if ( ( rc = realtek_create_ring ( rtl, &rtl->rx ) ) != 0 )
goto err_create_rx;
/* Create receive buffer */
if ( ( rc = realtek_create_buffer ( rtl ) ) != 0 )
goto err_create_buffer;
/* Accept all packets */
writel ( 0xffffffffUL, rtl->regs + RTL_MAR0 );
writel ( 0xffffffffUL, rtl->regs + RTL_MAR4 );
/* Enable transmitter and receiver. RTL8139 requires that
* this happens before writing to RCR.
*/
writeb ( ( RTL_CR_TE | RTL_CR_RE ), rtl->regs + RTL_CR );
/* Configure transmitter */
tcr = readl ( rtl->regs + RTL_TCR );
tcr &= ~RTL_TCR_MXDMA_MASK;
tcr |= RTL_TCR_MXDMA_DEFAULT;
writel ( tcr, rtl->regs + RTL_TCR );
/* Configure receiver */
rcr = readl ( rtl->regs + RTL_RCR );
rcr &= ~( RTL_RCR_STOP_WORKING | RTL_RCR_RXFTH_MASK |
RTL_RCR_RBLEN_MASK | RTL_RCR_MXDMA_MASK );
rcr |= ( RTL_RCR_RXFTH_DEFAULT | RTL_RCR_RBLEN_DEFAULT |
RTL_RCR_MXDMA_DEFAULT | RTL_RCR_WRAP | RTL_RCR_AB |
RTL_RCR_AM | RTL_RCR_APM | RTL_RCR_AAP );
writel ( rcr, rtl->regs + RTL_RCR );
/* Fill receive ring */
realtek_refill_rx ( rtl );
/* Update link state */
realtek_check_link ( netdev );
return 0;
realtek_destroy_buffer ( rtl );
err_create_buffer:
realtek_destroy_ring ( rtl, &rtl->rx );
err_create_rx:
realtek_destroy_ring ( rtl, &rtl->tx );
err_create_tx:
return rc;
}
/**
* Close network device
*
* @v netdev Network device
*/
static void realtek_close ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
unsigned int i;
/* Disable receiver and transmitter */
writeb ( 0, rtl->regs + RTL_CR );
/* Destroy receive buffer */
realtek_destroy_buffer ( rtl );
/* Destroy receive descriptor ring */
realtek_destroy_ring ( rtl, &rtl->rx );
/* Discard any unused receive buffers */
for ( i = 0 ; i < RTL_NUM_RX_DESC ; i++ ) {
if ( rtl->rx_iobuf[i] )
free_rx_iob ( rtl->rx_iobuf[i] );
rtl->rx_iobuf[i] = NULL;
}
/* Destroy transmit descriptor ring */
realtek_destroy_ring ( rtl, &rtl->tx );
/* Reset legacy transmit descriptor index, if applicable */
if ( rtl->legacy )
realtek_reset ( rtl );
}
/**
* Transmit packet
*
* @v netdev Network device
* @v iobuf I/O buffer
* @ret rc Return status code
*/
static int realtek_transmit ( struct net_device *netdev,
struct io_buffer *iobuf ) {
struct realtek_nic *rtl = netdev->priv;
struct realtek_descriptor *tx;
unsigned int tx_idx;
int is_last;
int rc;
/* Get next transmit descriptor */
if ( ( rtl->tx.prod - rtl->tx.cons ) >= RTL_NUM_TX_DESC ) {
netdev_tx_defer ( netdev, iobuf );
return 0;
}
tx_idx = ( rtl->tx.prod % RTL_NUM_TX_DESC );
/* Pad and align packet, if needed */
if ( rtl->legacy )
iob_pad ( iobuf, ETH_ZLEN );
/* Map I/O buffer */
if ( ( rc = iob_map_tx ( iobuf, rtl->dma ) ) != 0 )
return rc;
/* Update producer index */
rtl->tx.prod++;
/* Transmit packet */
if ( rtl->legacy ) {
/* Add to transmit ring */
writel ( iob_dma ( iobuf ), rtl->regs + RTL_TSAD ( tx_idx ) );
writel ( ( RTL_TSD_ERTXTH_DEFAULT | iob_len ( iobuf ) ),
rtl->regs + RTL_TSD ( tx_idx ) );
} else {
/* Populate transmit descriptor */
is_last = ( tx_idx == ( RTL_NUM_TX_DESC - 1 ) );
tx = &rtl->tx.desc[tx_idx];
tx->address = cpu_to_le64 ( iob_dma ( iobuf ) );
tx->length = cpu_to_le16 ( iob_len ( iobuf ) );
wmb();
tx->flags = ( cpu_to_le16 ( RTL_DESC_OWN | RTL_DESC_FS |
RTL_DESC_LS ) |
( is_last ? cpu_to_le16 ( RTL_DESC_EOR ) : 0 ) );
wmb();
/* Notify card that there are packets ready to transmit */
writeb ( RTL_TPPOLL_NPQ, rtl->regs + rtl->tppoll );
}
DBGC2 ( rtl, "REALTEK %p TX %d is [%lx,%lx)\n",
rtl, tx_idx, virt_to_phys ( iobuf->data ),
virt_to_phys ( iobuf->data ) + iob_len ( iobuf ) );
return 0;
}
/**
* Poll for completed packets
*
* @v netdev Network device
*/
static void realtek_poll_tx ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
struct realtek_descriptor *tx;
unsigned int tx_idx;
/* Check for completed packets */
while ( rtl->tx.cons != rtl->tx.prod ) {
/* Get next transmit descriptor */
tx_idx = ( rtl->tx.cons % RTL_NUM_TX_DESC );
/* Stop if descriptor is still in use */
if ( rtl->legacy ) {
/* Check ownership bit in transmit status register */
if ( ! ( readl ( rtl->regs + RTL_TSD ( tx_idx ) ) &
RTL_TSD_OWN ) )
return;
} else {
/* Check ownership bit in descriptor */
tx = &rtl->tx.desc[tx_idx];
if ( tx->flags & cpu_to_le16 ( RTL_DESC_OWN ) )
return;
}
DBGC2 ( rtl, "REALTEK %p TX %d complete\n", rtl, tx_idx );
/* Complete TX descriptor */
rtl->tx.cons++;
netdev_tx_complete_next ( netdev );
}
}
/**
* Poll for received packets (legacy mode)
*
* @v netdev Network device
*/
static void realtek_legacy_poll_rx ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
struct realtek_legacy_header *rx;
struct io_buffer *iobuf;
size_t len;
/* Check for received packets */
while ( ! ( readb ( rtl->regs + RTL_CR ) & RTL_CR_BUFE ) ) {
/* Extract packet from receive buffer */
rx = ( rtl->rxbuf.data + rtl->rxbuf.offset );
len = le16_to_cpu ( rx->length );
if ( rx->status & cpu_to_le16 ( RTL_STAT_ROK ) ) {
DBGC2 ( rtl, "REALTEK %p RX offset %x+%zx\n",
rtl, rtl->rxbuf.offset, len );
/* Allocate I/O buffer */
iobuf = alloc_iob ( len );
if ( ! iobuf ) {
netdev_rx_err ( netdev, NULL, -ENOMEM );
/* Leave packet for next poll */
break;
}
/* Copy data to I/O buffer */
memcpy ( iob_put ( iobuf, len ), rx->data, len );
iob_unput ( iobuf, 4 /* strip CRC */ );
/* Hand off to network stack */
netdev_rx ( netdev, iobuf );
} else {
DBGC ( rtl, "REALTEK %p RX offset %x+%zx error %04x\n",
rtl, rtl->rxbuf.offset, len,
le16_to_cpu ( rx->status ) );
netdev_rx_err ( netdev, NULL, -EIO );
}
/* Update buffer offset */
rtl->rxbuf.offset += ( sizeof ( *rx ) + len );
rtl->rxbuf.offset = ( ( rtl->rxbuf.offset + 3 ) & ~3 );
rtl->rxbuf.offset = ( rtl->rxbuf.offset % RTL_RXBUF_LEN );
writew ( ( rtl->rxbuf.offset - 16 ), rtl->regs + RTL_CAPR );
/* Give chip time to react before rechecking RTL_CR */
readw ( rtl->regs + RTL_CAPR );
}
}
/**
* Poll for received packets
*
* @v netdev Network device
*/
static void realtek_poll_rx ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
struct realtek_descriptor *rx;
struct io_buffer *iobuf;
unsigned int rx_idx;
size_t len;
/* Poll receive buffer if in legacy mode */
if ( rtl->legacy ) {
realtek_legacy_poll_rx ( netdev );
return;
}
/* Check for received packets */
while ( rtl->rx.cons != rtl->rx.prod ) {
/* Get next receive descriptor */
rx_idx = ( rtl->rx.cons % RTL_NUM_RX_DESC );
rx = &rtl->rx.desc[rx_idx];
/* Stop if descriptor is still in use */
if ( rx->flags & cpu_to_le16 ( RTL_DESC_OWN ) )
return;
/* Populate I/O buffer */
iobuf = rtl->rx_iobuf[rx_idx];
rtl->rx_iobuf[rx_idx] = NULL;
len = ( le16_to_cpu ( rx->length ) & RTL_DESC_SIZE_MASK );
iob_put ( iobuf, ( len - 4 /* strip CRC */ ) );
/* Hand off to network stack */
if ( rx->flags & cpu_to_le16 ( RTL_DESC_RES ) ) {
DBGC ( rtl, "REALTEK %p RX %d error (length %zd, "
"flags %04x)\n", rtl, rx_idx, len,
le16_to_cpu ( rx->flags ) );
netdev_rx_err ( netdev, iobuf, -EIO );
} else {
DBGC2 ( rtl, "REALTEK %p RX %d complete (length "
"%zd)\n", rtl, rx_idx, len );
netdev_rx ( netdev, iobuf );
}
rtl->rx.cons++;
}
}
/**
* Poll for completed and received packets
*
* @v netdev Network device
*/
static void realtek_poll ( struct net_device *netdev ) {
struct realtek_nic *rtl = netdev->priv;
uint16_t isr;
/* Check for and acknowledge interrupts */
isr = readw ( rtl->regs + RTL_ISR );
if ( ! isr )
return;
writew ( isr, rtl->regs + RTL_ISR );
/* Poll for TX completions, if applicable */
if ( isr & ( RTL_IRQ_TER | RTL_IRQ_TOK ) )
realtek_poll_tx ( netdev );
/* Poll for RX completionsm, if applicable */
if ( isr & ( RTL_IRQ_RER | RTL_IRQ_ROK ) )
realtek_poll_rx ( netdev );
/* Check link state, if applicable */
if ( isr & RTL_IRQ_PUN_LINKCHG )
realtek_check_link ( netdev );
/* Refill RX ring */
realtek_refill_rx ( rtl );
}
/**
* Enable or disable interrupts
*
* @v netdev Network device
* @v enable Interrupts should be enabled
*/
static void realtek_irq ( struct net_device *netdev, int enable ) {
struct realtek_nic *rtl = netdev->priv;
uint16_t imr;
/* Set interrupt mask */
imr = ( enable ? ( RTL_IRQ_PUN_LINKCHG | RTL_IRQ_TER | RTL_IRQ_TOK |
RTL_IRQ_RER | RTL_IRQ_ROK ) : 0 );
writew ( imr, rtl->regs + RTL_IMR );
}
/** Realtek network device operations */
static struct net_device_operations realtek_operations = {
.open = realtek_open,
.close = realtek_close,
.transmit = realtek_transmit,
.poll = realtek_poll,
.irq = realtek_irq,
};
/******************************************************************************
*
* PCI interface
*
******************************************************************************
*/
/**
* Detect device type
*
* @v rtl Realtek device
*/
static void realtek_detect ( struct realtek_nic *rtl ) {
uint16_t rms;
uint16_t check_rms;
uint16_t cpcr;
uint16_t check_cpcr;
/* The RX Packet Maximum Size register is present only on
* 8169. Try to set to our intended MTU.
*/
rms = RTL_RX_MAX_LEN;
writew ( rms, rtl->regs + RTL_RMS );
check_rms = readw ( rtl->regs + RTL_RMS );
/* The C+ Command register is present only on 8169 and 8139C+.
* Try to enable C+ mode and PCI Dual Address Cycle (for
* 64-bit systems), if supported.
*
* Note that enabling DAC seems to cause bizarre behaviour
* (lockups, garbage data on the wire) on some systems, even
* if only 32-bit addresses are used.
*
* Disable VLAN offload, since some cards seem to have it
* enabled by default.
*/
cpcr = readw ( rtl->regs + RTL_CPCR );
cpcr |= ( RTL_CPCR_MULRW | RTL_CPCR_CPRX | RTL_CPCR_CPTX );
if ( sizeof ( physaddr_t ) > sizeof ( uint32_t ) )
cpcr |= RTL_CPCR_DAC;
cpcr &= ~RTL_CPCR_VLAN;
writew ( cpcr, rtl->regs + RTL_CPCR );
check_cpcr = readw ( rtl->regs + RTL_CPCR );
/* Detect device type */
if ( check_rms == rms ) {
DBGC ( rtl, "REALTEK %p appears to be an RTL8169\n", rtl );
rtl->have_phy_regs = 1;
rtl->tppoll = RTL_TPPOLL_8169;
dma_set_mask_64bit ( rtl->dma );
} else {
if ( ( check_cpcr == cpcr ) && ( cpcr != 0xffff ) ) {
DBGC ( rtl, "REALTEK %p appears to be an RTL8139C+\n",
rtl );
rtl->tppoll = RTL_TPPOLL_8139CP;
dma_set_mask_64bit ( rtl->dma );
} else {
DBGC ( rtl, "REALTEK %p appears to be an RTL8139\n",
rtl );
rtl->legacy = 1;
}
rtl->eeprom.bus = &rtl->spibit.bus;
}
}
/**
* Probe PCI device
*
* @v pci PCI device
* @ret rc Return status code
*/
static int realtek_probe ( struct pci_device *pci ) {
struct net_device *netdev;
struct realtek_nic *rtl;
unsigned int i;
int rc;
/* Allocate and initialise net device */
netdev = alloc_etherdev ( sizeof ( *rtl ) );
if ( ! netdev ) {
rc = -ENOMEM;
goto err_alloc;
}
netdev_init ( netdev, &realtek_operations );
rtl = netdev->priv;
pci_set_drvdata ( pci, netdev );
netdev->dev = &pci->dev;
memset ( rtl, 0, sizeof ( *rtl ) );
realtek_init_ring ( &rtl->tx, RTL_NUM_TX_DESC, RTL_TNPDS );
realtek_init_ring ( &rtl->rx, RTL_NUM_RX_DESC, RTL_RDSAR );
/* Fix up PCI device */
adjust_pci_device ( pci );
/* Map registers */
rtl->regs = pci_ioremap ( pci, pci->membase, RTL_BAR_SIZE );
if ( ! rtl->regs ) {
rc = -ENODEV;
goto err_ioremap;
}
/* Configure DMA */
rtl->dma = &pci->dma;
/* Reset the NIC */
if ( ( rc = realtek_reset ( rtl ) ) != 0 )
goto err_reset;
/* Detect device type */
realtek_detect ( rtl );
/* Initialise EEPROM */
if ( rtl->eeprom.bus &&
( ( rc = realtek_init_eeprom ( netdev ) ) == 0 ) ) {
/* Read MAC address from EEPROM */
if ( ( rc = nvs_read ( &rtl->eeprom.nvs, RTL_EEPROM_MAC,
netdev->hw_addr, ETH_ALEN ) ) != 0 ) {
DBGC ( rtl, "REALTEK %p could not read MAC address: "
"%s\n", rtl, strerror ( rc ) );
goto err_nvs_read;
}
} else {
/* EEPROM not present. Fall back to reading the
* current ID register value, which will hopefully
* have been programmed by the platform firmware.
*/
for ( i = 0 ; i < ETH_ALEN ; i++ )
netdev->hw_addr[i] = readb ( rtl->regs + RTL_IDR0 + i );
}
/* Initialise and reset MII interface */
mdio_init ( &rtl->mdio, &realtek_mii_operations );
mii_init ( &rtl->mii, &rtl->mdio, 0 );
if ( ( rc = realtek_phy_reset ( rtl ) ) != 0 )
goto err_phy_reset;
/* Register network device */
if ( ( rc = register_netdev ( netdev ) ) != 0 )
goto err_register_netdev;
/* Set initial link state */
realtek_check_link ( netdev );
/* Register non-volatile options, if applicable */
if ( rtl->nvo.nvs ) {
if ( ( rc = register_nvo ( &rtl->nvo,
netdev_settings ( netdev ) ) ) != 0)
goto err_register_nvo;
}
return 0;
err_register_nvo:
unregister_netdev ( netdev );
err_register_netdev:
err_phy_reset:
err_nvs_read:
realtek_reset ( rtl );
err_reset:
iounmap ( rtl->regs );
err_ioremap:
netdev_nullify ( netdev );
netdev_put ( netdev );
err_alloc:
return rc;
}
/**
* Remove PCI device
*
* @v pci PCI device
*/
static void realtek_remove ( struct pci_device *pci ) {
struct net_device *netdev = pci_get_drvdata ( pci );
struct realtek_nic *rtl = netdev->priv;
/* Unregister non-volatile options, if applicable */
if ( rtl->nvo.nvs )
unregister_nvo ( &rtl->nvo );
/* Unregister network device */
unregister_netdev ( netdev );
/* Reset card */
realtek_reset ( rtl );
/* Free network device */
iounmap ( rtl->regs );
netdev_nullify ( netdev );
netdev_put ( netdev );
}
/** Realtek PCI device IDs */
static struct pci_device_id realtek_nics[] = {
PCI_ROM ( 0x0001, 0x8168, "clone8169", "Cloned 8169", 0 ),
PCI_ROM ( 0x018a, 0x0106, "fpc0106tx", "LevelOne FPC-0106TX", 0 ),
PCI_ROM ( 0x021b, 0x8139, "hne300", "Compaq HNE-300", 0 ),
PCI_ROM ( 0x02ac, 0x1012, "s1012", "SpeedStream 1012", 0 ),
PCI_ROM ( 0x0357, 0x000a, "ttpmon", "TTTech TTP-Monitoring", 0 ),
PCI_ROM ( 0x10ec, 0x8129, "rtl8129", "RTL-8129", 0 ),
PCI_ROM ( 0x10ec, 0x8136, "rtl8136", "RTL8101E/RTL8102E", 0 ),
PCI_ROM ( 0x10ec, 0x8138, "rtl8138", "RT8139 (B/C)", 0 ),
PCI_ROM ( 0x10ec, 0x8139, "rtl8139", "RTL-8139/8139C/8139C+", 0 ),
PCI_ROM ( 0x10ec, 0x8167, "rtl8167", "RTL-8110SC/8169SC", 0 ),
PCI_ROM ( 0x10ec, 0x8168, "rtl8168", "RTL8111/8168B", 0 ),
PCI_ROM ( 0x10ec, 0x8169, "rtl8169", "RTL-8169", 0 ),
PCI_ROM ( 0x1113, 0x1211, "smc1211", "SMC2-1211TX", 0 ),
PCI_ROM ( 0x1186, 0x1300, "dfe538", "DFE530TX+/DFE538TX", 0 ),
PCI_ROM ( 0x1186, 0x1340, "dfe690", "DFE-690TXD", 0 ),
PCI_ROM ( 0x1186, 0x4300, "dge528t", "DGE-528T", 0 ),
PCI_ROM ( 0x11db, 0x1234, "sega8139", "Sega Enterprises 8139", 0 ),
PCI_ROM ( 0x1259, 0xa117, "allied8139", "Allied Telesyn 8139", 0 ),
PCI_ROM ( 0x1259, 0xa11e, "allied81xx", "Allied Telesyn 81xx", 0 ),
PCI_ROM ( 0x1259, 0xc107, "allied8169", "Allied Telesyn 8169", 0 ),
PCI_ROM ( 0x126c, 0x1211, "northen8139","Northern Telecom 8139", 0 ),
PCI_ROM ( 0x13d1, 0xab06, "fe2000vx", "Abocom FE2000VX", 0 ),
PCI_ROM ( 0x1432, 0x9130, "edi8139", "Edimax 8139", 0 ),
PCI_ROM ( 0x14ea, 0xab06, "fnw3603tx", "Planex FNW-3603-TX", 0 ),
PCI_ROM ( 0x14ea, 0xab07, "fnw3800tx", "Planex FNW-3800-TX", 0 ),
PCI_ROM ( 0x1500, 0x1360, "delta8139", "Delta Electronics 8139", 0 ),
PCI_ROM ( 0x16ec, 0x0116, "usr997902", "USR997902", 0 ),
PCI_ROM ( 0x1737, 0x1032, "linksys8169","Linksys 8169", 0 ),
PCI_ROM ( 0x1743, 0x8139, "rolf100", "Peppercorn ROL/F-100", 0 ),
PCI_ROM ( 0x4033, 0x1360, "addron8139", "Addtron 8139", 0 ),
PCI_ROM ( 0xffff, 0x8139, "clonse8139", "Cloned 8139", 0 ),
};
/** Realtek PCI driver */
struct pci_driver realtek_driver __pci_driver = {
.ids = realtek_nics,
.id_count = ( sizeof ( realtek_nics ) / sizeof ( realtek_nics[0] ) ),
.probe = realtek_probe,
.remove = realtek_remove,
};