blob: 73a80194fd661714a3e1766a206a3900b03ff4be [file] [log] [blame]
#include <stdint.h>
#include <stdio.h>
#include <errno.h>
#include <ipxe/if_ether.h>
#include <ipxe/netdevice.h>
#include <ipxe/ethernet.h>
#include <ipxe/iobuf.h>
#include <nic.h>
/*
* Quick and dirty compatibility layer
*
* This should allow old-API PCI drivers to at least function until
* they are updated. It will not help non-PCI drivers.
*
* No drivers should rely on this code. It will be removed asap.
*
*/
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
struct nic nic;
static int legacy_registered = 0;
static int legacy_transmit ( struct net_device *netdev, struct io_buffer *iobuf ) {
struct nic *nic = netdev->priv;
struct ethhdr *ethhdr;
DBG ( "Transmitting %zd bytes\n", iob_len ( iobuf ) );
iob_pad ( iobuf, ETH_ZLEN );
ethhdr = iobuf->data;
iob_pull ( iobuf, sizeof ( *ethhdr ) );
nic->nic_op->transmit ( nic, ( const char * ) ethhdr->h_dest,
ntohs ( ethhdr->h_protocol ),
iob_len ( iobuf ), iobuf->data );
netdev_tx_complete ( netdev, iobuf );
return 0;
}
static void legacy_poll ( struct net_device *netdev ) {
struct nic *nic = netdev->priv;
struct io_buffer *iobuf;
iobuf = alloc_iob ( ETH_FRAME_LEN );
if ( ! iobuf )
return;
nic->packet = iobuf->data;
if ( nic->nic_op->poll ( nic, 1 ) ) {
DBG ( "Received %d bytes\n", nic->packetlen );
iob_put ( iobuf, nic->packetlen );
netdev_rx ( netdev, iobuf );
} else {
free_iob ( iobuf );
}
}
static int legacy_open ( struct net_device *netdev __unused ) {
/* Nothing to do */
return 0;
}
static void legacy_close ( struct net_device *netdev __unused ) {
/* Nothing to do */
}
static void legacy_irq ( struct net_device *netdev __unused, int enable ) {
struct nic *nic = netdev->priv;
nic->nic_op->irq ( nic, ( enable ? ENABLE : DISABLE ) );
}
static struct net_device_operations legacy_operations = {
.open = legacy_open,
.close = legacy_close,
.transmit = legacy_transmit,
.poll = legacy_poll,
.irq = legacy_irq,
};
int legacy_probe ( void *hwdev,
void ( * set_drvdata ) ( void *hwdev, void *priv ),
struct device *dev,
int ( * probe ) ( struct nic *nic, void *hwdev ),
void ( * disable ) ( struct nic *nic, void *hwdev ) ) {
struct net_device *netdev;
int rc;
if ( legacy_registered )
return -EBUSY;
netdev = alloc_etherdev ( 0 );
if ( ! netdev )
return -ENOMEM;
netdev_init ( netdev, &legacy_operations );
netdev->priv = &nic;
memset ( &nic, 0, sizeof ( nic ) );
set_drvdata ( hwdev, netdev );
netdev->dev = dev;
nic.node_addr = netdev->hw_addr;
nic.irqno = dev->desc.irq;
if ( ! probe ( &nic, hwdev ) ) {
rc = -ENODEV;
goto err_probe;
}
/* Overwrite the IRQ number. Some legacy devices set
* nic->irqno to 0 in the probe routine to indicate that they
* don't support interrupts; doing this allows the timer
* interrupt to be used instead.
*/
dev->desc.irq = nic.irqno;
if ( ( rc = register_netdev ( netdev ) ) != 0 )
goto err_register;
/* Mark as link up; legacy devices don't handle link state */
netdev_link_up ( netdev );
/* Do not remove this message */
printf ( "WARNING: Using legacy NIC wrapper on %s\n",
netdev->ll_protocol->ntoa ( nic.node_addr ) );
legacy_registered = 1;
return 0;
err_register:
disable ( &nic, hwdev );
err_probe:
netdev_nullify ( netdev );
netdev_put ( netdev );
return rc;
}
void legacy_remove ( void *hwdev,
void * ( * get_drvdata ) ( void *hwdev ),
void ( * disable ) ( struct nic *nic, void *hwdev ) ) {
struct net_device *netdev = get_drvdata ( hwdev );
struct nic *nic = netdev->priv;
unregister_netdev ( netdev );
disable ( nic, hwdev );
netdev_nullify ( netdev );
netdev_put ( netdev );
legacy_registered = 0;
}
int dummy_connect ( struct nic *nic __unused ) {
return 1;
}
void dummy_irq ( struct nic *nic __unused, irq_action_t irq_action __unused ) {
return;
}