blob: a3366e8060df2dc86ccc7b9f5841d30336b49ca0 [file] [log] [blame]
/*
* Copyright (C) 2012 Michael Brown <mbrown@fensystems.co.uk>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
* You can also choose to distribute this program under the terms of
* the Unmodified Binary Distribution Licence (as given in the file
* COPYING.UBDL), provided that you have satisfied its requirements.
*
* Alternatively, you may distribute this code in source or binary
* form, with or without modification, provided that the following
* conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the above disclaimer.
*
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the above
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*/
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
/** @file
*
* DRBG mechanism
*
* This mechanism is designed to comply with ANS X9.82 Part 3-2007
* Section 9. This standard is not freely available, but most of the
* text appears to be shared with NIST SP 800-90, which can be
* downloaded from
*
* http://csrc.nist.gov/publications/nistpubs/800-90/SP800-90revised_March2007.pdf
*
* Where possible, references are given to both documents. In the
* case of any disagreement, ANS X9.82 takes priority over NIST SP
* 800-90. (In particular, note that some algorithms that are
* Approved by NIST SP 800-90 are not Approved by ANS X9.82.)
*/
#include <stdint.h>
#include <string.h>
#include <errno.h>
#include <assert.h>
#include <ipxe/entropy.h>
#include <ipxe/drbg.h>
/**
* Instantiate DRBG
*
* @v state Algorithm state to be initialised
* @v personal Personalisation string
* @v personal_len Length of personalisation string
* @ret rc Return status code
*
* This is the Instantiate_function defined in ANS X9.82 Part 3-2007
* Section 9.2 (NIST SP 800-90 Section 9.1).
*
* Only a single security strength is supported, and prediction
* resistance is always enabled. The nonce is accounted for by
* increasing the entropy input, as per ANS X9.82 Part 3-2007 Section
* 8.4.2 (NIST SP 800-90 Section 8.6.7).
*/
int drbg_instantiate ( struct drbg_state *state, const void *personal,
size_t personal_len ) {
unsigned int entropy_bits = ( ( 3 * DRBG_SECURITY_STRENGTH + 1 ) / 2 );
size_t min_len = DRBG_MIN_ENTROPY_LEN_BYTES;
size_t max_len = DRBG_MAX_ENTROPY_LEN_BYTES;
uint8_t data[max_len];
int len;
int rc;
DBGC ( state, "DRBG %p instantiate\n", state );
/* Sanity checks */
assert ( state != NULL );
/* 1. If requested_instantiation_security_strength >
* highest_supported_security_strength, then return an
* ERROR_FLAG
*/
if ( DRBG_SECURITY_STRENGTH > DRBG_MAX_SECURITY_STRENGTH ) {
DBGC ( state, "DRBG %p cannot support security strength %d\n",
state, DRBG_SECURITY_STRENGTH );
return -ENOTSUP;
}
/* 2. If prediction_resistance_flag is set, and prediction
* resistance is not supported, then return an ERROR_FLAG
*
* (Nothing to do since prediction resistance is always
* supported.)
*/
/* 3. If the length of the personalization_string >
* max_personalization_string_length, return an ERROR_FLAG
*/
if ( personal_len > DRBG_MAX_PERSONAL_LEN_BYTES ) {
DBGC ( state, "DRBG %p personalisation string too long (%zd "
"bytes)\n", state, personal_len );
return -ERANGE;
}
/* 4. Set security_strength to the nearest security strength
* greater than or equal to
* requested_instantiation_security_strength.
*
* (Nothing to do since we support only a single security
* strength.)
*/
/* 5. Using the security_strength, select appropriate DRBG
* mechanism parameters.
*
* (Nothing to do since we support only a single security
* strength.)
*/
/* 6. ( status, entropy_input ) = Get_entropy_input (
* security_strength, min_length, max_length,
* prediction_resistance_request )
* 7. If an ERROR is returned in step 6, return a
* CATASTROPHIC_ERROR_FLAG.
* 8. Obtain a nonce.
*/
len = get_entropy_input ( entropy_bits, data, min_len,
sizeof ( data ) );
if ( len < 0 ) {
rc = len;
DBGC ( state, "DRBG %p could not get entropy input: %s\n",
state, strerror ( rc ) );
return rc;
}
assert ( len >= ( int ) min_len );
assert ( len <= ( int ) sizeof ( data ) );
/* 9. initial_working_state = Instantiate_algorithm (
* entropy_input, nonce, personalization_string ).
*/
drbg_instantiate_algorithm ( state, data, len, personal, personal_len );
/* 10. Get a state_handle for a currently empty state. If an
* empty internal state cannot be found, return an
* ERROR_FLAG.
* 11. Set the internal state indicated by state_handle to
* the initial values for the internal state (i.e. set
* the working_state to the values returned as
* initial_working_state in step 9 and any other values
* required for the working_state, and set the
* administrative information to the appropriate values.
*
* (Almost nothing to do since the memory to hold the state
* was passed in by the caller and has already been updated
* in-situ.)
*/
state->reseed_required = 0;
state->valid = 1;
/* 12. Return SUCCESS and state_handle. */
return 0;
}
/**
* Reseed DRBG
*
* @v state Algorithm state
* @v additional Additional input
* @v additional_len Length of additional input
* @ret rc Return status code
*
* This is the Reseed_function defined in ANS X9.82 Part 3-2007
* Section 9.3 (NIST SP 800-90 Section 9.2).
*
* Prediction resistance is always enabled.
*/
int drbg_reseed ( struct drbg_state *state, const void *additional,
size_t additional_len ) {
unsigned int entropy_bits = DRBG_SECURITY_STRENGTH;
size_t min_len = DRBG_MIN_ENTROPY_LEN_BYTES;
size_t max_len = DRBG_MAX_ENTROPY_LEN_BYTES;
uint8_t data[max_len];
int len;
int rc;
DBGC ( state, "DRBG %p reseed\n", state );
/* Sanity checks */
assert ( state != NULL );
/* 1. Using state_handle, obtain the current internal state.
* If state_handle indicates an invalid or empty internal
* state, return an ERROR_FLAG.
*
* (Almost nothing to do since the memory holding the internal
* state was passed in by the caller.)
*/
if ( ! state->valid ) {
DBGC ( state, "DRBG %p not valid\n", state );
return -EINVAL;
}
/* 2. If prediction_resistance_request is set, and
* prediction_resistance_flag is not set, then return an
* ERROR_FLAG.
*
* (Nothing to do since prediction resistance is always
* supported.)
*/
/* 3. If the length of the additional_input >
* max_additional_input_length, return an ERROR_FLAG.
*/
if ( additional_len > DRBG_MAX_ADDITIONAL_LEN_BYTES ) {
DBGC ( state, "DRBG %p additional input too long (%zd bytes)\n",
state, additional_len );
return -ERANGE;
}
/* 4. ( status, entropy_input ) = Get_entropy_input (
* security_strength, min_length, max_length,
* prediction_resistance_request ).
*
* 5. If an ERROR is returned in step 4, return a
* CATASTROPHIC_ERROR_FLAG.
*/
len = get_entropy_input ( entropy_bits, data, min_len,
sizeof ( data ) );
if ( len < 0 ) {
rc = len;
DBGC ( state, "DRBG %p could not get entropy input: %s\n",
state, strerror ( rc ) );
return rc;
}
/* 6. new_working_state = Reseed_algorithm ( working_state,
* entropy_input, additional_input ).
*/
drbg_reseed_algorithm ( state, data, len, additional, additional_len );
/* 7. Replace the working_state in the internal state
* indicated by state_handle with the values of
* new_working_state obtained in step 6.
*
* (Nothing to do since the state has already been updated in-situ.)
*/
/* 8. Return SUCCESS. */
return 0;
}
/**
* Generate pseudorandom bits using DRBG
*
* @v state Algorithm state
* @v additional Additional input
* @v additional_len Length of additional input
* @v prediction_resist Prediction resistance is required
* @v data Output buffer
* @v len Length of output buffer
* @ret rc Return status code
*
* This is the Generate_function defined in ANS X9.82 Part 3-2007
* Section 9.4 (NIST SP 800-90 Section 9.3).
*
* Requests must be for an integral number of bytes. Only a single
* security strength is supported. Prediction resistance is supported
* if requested.
*/
int drbg_generate ( struct drbg_state *state, const void *additional,
size_t additional_len, int prediction_resist,
void *data, size_t len ) {
int rc;
DBGC ( state, "DRBG %p generate\n", state );
/* Sanity checks */
assert ( state != NULL );
assert ( data != NULL );
/* 1. Using state_handle, obtain the current internal state
* for the instantiation. If state_handle indicates an
* invalid or empty internal state, then return an ERROR_FLAG.
*
* (Almost nothing to do since the memory holding the internal
* state was passed in by the caller.)
*/
if ( ! state->valid ) {
DBGC ( state, "DRBG %p not valid\n", state );
return -EINVAL;
}
/* 2. If requested_number_of_bits >
* max_number_of_bits_per_request, then return an
* ERROR_FLAG.
*/
if ( len > DRBG_MAX_GENERATED_LEN_BYTES ) {
DBGC ( state, "DRBG %p request too long (%zd bytes)\n",
state, len );
return -ERANGE;
}
/* 3. If requested_security_strength > the security_strength
* indicated in the internal state, then return an
* ERROR_FLAG.
*
* (Nothing to do since only a single security strength is
* supported.)
*/
/* 4. If the length of the additional_input >
* max_additional_input_length, then return an ERROR_FLAG.
*/
if ( additional_len > DRBG_MAX_ADDITIONAL_LEN_BYTES ) {
DBGC ( state, "DRBG %p additional input too long (%zd bytes)\n",
state, additional_len );
return -ERANGE;
}
/* 5. If prediction_resistance_request is set, and
* prediction_resistance_flag is not set, then return an
* ERROR_FLAG.
*
* (Nothing to do since prediction resistance is always
* supported.)
*/
/* 6. Clear the reseed_required_flag. */
state->reseed_required = 0;
step_7:
/* 7. If reseed_required_flag is set, or if
* prediction_resistance_request is set, then
*/
if ( state->reseed_required || prediction_resist ) {
/* 7.1 status = Reseed_function ( state_handle,
* prediction_resistance_request,
* additional_input )
* 7.2 If status indicates an ERROR, then return
* status.
*/
if ( ( rc = drbg_reseed ( state, additional,
additional_len ) ) != 0 ) {
DBGC ( state, "DRBG %p could not reseed: %s\n",
state, strerror ( rc ) );
return rc;
}
/* 7.3 Using state_handle, obtain the new internal
* state.
*
* (Nothing to do since the internal state has been
* updated in-situ.)
*/
/* 7.4 additional_input = the Null string. */
additional = NULL;
additional_len = 0;
/* 7.5 Clear the reseed_required_flag. */
state->reseed_required = 0;
}
/* 8. ( status, pseudorandom_bits, new_working_state ) =
* Generate_algorithm ( working_state,
* requested_number_of_bits, additional_input ).
*/
rc = drbg_generate_algorithm ( state, additional, additional_len,
data, len );
/* 9. If status indicates that a reseed is required before
* the requested bits can be generated, then
*/
if ( rc != 0 ) {
/* 9.1 Set the reseed_required_flag. */
state->reseed_required = 1;
/* 9.2 If the prediction_resistance_flag is set, then
* set the prediction_resistance_request
* indication.
*/
prediction_resist = 1;
/* 9.3 Go to step 7. */
goto step_7;
}
/* 10. Replace the old working_state in the internal state
* indicated by state_handle with the values of
* new_working_state.
*
* (Nothing to do since the working state has already been
* updated in-situ.)
*/
/* 11. Return SUCCESS and pseudorandom_bits. */
return 0;
}
/**
* Uninstantiate DRBG
*
* @v state Algorithm state
*
* This is the Uninstantiate_function defined in ANS X9.82 Part 3-2007
* Section 9.5 (NIST SP 800-90 Section 9.4).
*/
void drbg_uninstantiate ( struct drbg_state *state ) {
DBGC ( state, "DRBG %p uninstantiate\n", state );
/* Sanity checks */
assert ( state != NULL );
/* 1. If state_handle indicates an invalid state, then return
* an ERROR_FLAG.
*
* (Nothing to do since the memory holding the internal state
* was passed in by the caller.)
*/
/* 2. Erase the contents of the internal state indicated by
* state_handle.
*/
memset ( state, 0, sizeof ( *state ) );
/* 3. Return SUCCESS. */
}