| /* |
| * Copyright (c) 2010 Andrei Faur <da3drus@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER ); |
| |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <assert.h> |
| #include <byteswap.h> |
| #include <errno.h> |
| #include <ipxe/ethernet.h> |
| #include <ipxe/if_ether.h> |
| #include <ipxe/io.h> |
| #include <ipxe/iobuf.h> |
| #include <ipxe/malloc.h> |
| #include <ipxe/netdevice.h> |
| #include <ipxe/pci.h> |
| #include <ipxe/timer.h> |
| #include <mii.h> |
| #include "pcnet32.h" |
| |
| static u16 pcnet32_wio_read_csr ( unsigned long addr, int index ) |
| { |
| outw ( index, addr + PCNET32_WIO_RAP ); |
| return inw ( addr + PCNET32_WIO_RDP ); |
| } |
| |
| static void pcnet32_wio_write_csr ( unsigned long addr, int index, u16 val ) |
| { |
| outw ( index, addr + PCNET32_WIO_RAP ); |
| outw ( val, addr + PCNET32_WIO_RDP ); |
| } |
| |
| static u16 pcnet32_wio_read_bcr ( unsigned long addr, int index ) |
| { |
| outw ( index, addr + PCNET32_WIO_RAP ); |
| return inw ( addr + PCNET32_WIO_BDP ); |
| } |
| |
| static void pcnet32_wio_write_bcr ( unsigned long addr, int index, u16 val ) |
| { |
| outw ( index, addr + PCNET32_WIO_RAP ); |
| outw ( val, addr + PCNET32_WIO_BDP ); |
| } |
| |
| static u16 pcnet32_wio_read_rap ( unsigned long addr ) |
| { |
| return inw ( addr + PCNET32_WIO_RAP ); |
| } |
| |
| static void pcnet32_wio_write_rap ( unsigned long addr , u16 val ) |
| { |
| outw ( val, addr + PCNET32_WIO_RAP ); |
| } |
| |
| static void pcnet32_wio_reset ( unsigned long addr ) |
| { |
| inw ( addr + PCNET32_WIO_RESET ); |
| } |
| |
| static int pcnet32_wio_check ( unsigned long addr ) |
| { |
| outw ( 88, addr + PCNET32_WIO_RAP ); |
| return ( inw ( addr + PCNET32_WIO_RAP ) == 88 ); |
| } |
| |
| static struct pcnet32_access pcnet32_wio = { |
| .read_csr = pcnet32_wio_read_csr, |
| .write_csr = pcnet32_wio_write_csr, |
| .read_bcr = pcnet32_wio_read_bcr, |
| .write_bcr = pcnet32_wio_write_bcr, |
| .read_rap = pcnet32_wio_read_rap, |
| .write_rap = pcnet32_wio_write_rap, |
| .reset = pcnet32_wio_reset, |
| }; |
| |
| static u16 pcnet32_dwio_read_csr ( unsigned long addr, int index ) |
| { |
| outl ( index, addr + PCNET32_DWIO_RAP ); |
| return ( inl ( addr + PCNET32_DWIO_RDP ) & 0xffff ); |
| } |
| |
| static void pcnet32_dwio_write_csr ( unsigned long addr, int index, u16 val ) |
| { |
| outl ( index, addr + PCNET32_DWIO_RAP ); |
| outl ( val, addr + PCNET32_DWIO_RDP ); |
| } |
| |
| static u16 pcnet32_dwio_read_bcr ( unsigned long addr, int index ) |
| { |
| outl ( index, addr + PCNET32_DWIO_RAP ); |
| return ( inl ( addr + PCNET32_DWIO_BDP ) & 0xffff ); |
| } |
| |
| static void pcnet32_dwio_write_bcr ( unsigned long addr, int index, u16 val ) |
| { |
| outl ( index, addr + PCNET32_DWIO_RAP ); |
| outl ( val, addr + PCNET32_DWIO_BDP ); |
| } |
| |
| static u16 pcnet32_dwio_read_rap ( unsigned long addr ) |
| { |
| return ( inl ( addr + PCNET32_DWIO_RAP ) & 0xffff ); |
| } |
| |
| static void pcnet32_dwio_write_rap ( unsigned long addr , u16 val ) |
| { |
| outl ( val, addr + PCNET32_DWIO_RAP ); |
| } |
| |
| static void pcnet32_dwio_reset ( unsigned long addr ) |
| { |
| inl ( addr + PCNET32_DWIO_RESET ); |
| } |
| |
| static int pcnet32_dwio_check ( unsigned long addr ) |
| { |
| outl ( 88, addr + PCNET32_DWIO_RAP ); |
| return ( ( inl ( addr + PCNET32_DWIO_RAP ) & 0xffff ) == 88 ); |
| } |
| |
| |
| static struct pcnet32_access pcnet32_dwio = { |
| .read_csr = pcnet32_dwio_read_csr, |
| .write_csr = pcnet32_dwio_write_csr, |
| .read_bcr = pcnet32_dwio_read_bcr, |
| .write_bcr = pcnet32_dwio_write_bcr, |
| .read_rap = pcnet32_dwio_read_rap, |
| .write_rap = pcnet32_dwio_write_rap, |
| .reset = pcnet32_dwio_reset, |
| }; |
| |
| static int |
| pcnet32_mdio_read ( struct net_device *netdev, int phy, int reg ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| u16 val_out; |
| |
| if ( ! priv->mii ) |
| return 0; |
| |
| /* First, select PHY chip and the register we want to read */ |
| priv->a->write_bcr ( ioaddr, 33, |
| ( ( phy & 0x1f ) << 5 ) | ( reg & 0x1f ) ); |
| |
| /* Read the selected register's value */ |
| val_out = priv->a->read_bcr ( ioaddr, 34 ); |
| |
| return val_out; |
| } |
| |
| static void |
| __unused pcnet32_mdio_write ( struct net_device *netdev, int phy, int reg, int val ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| |
| if ( ! priv->mii ) |
| return; |
| |
| /* First, select PHY chip and the register we want to write to */ |
| priv->a->write_bcr ( ioaddr, 33, |
| ( ( phy & 0x1f ) << 5 ) | ( reg & 0x1f ) ); |
| |
| /* Write val to the selected register */ |
| priv->a->write_bcr ( ioaddr, 34, val ); |
| } |
| |
| |
| /** |
| * pcnet32_refill_rx_ring - Allocates iobufs for every Rx descriptor |
| * that doesn't have one and isn't in use by the hardware |
| * |
| * @v priv Driver private structure |
| */ |
| static void |
| pcnet32_refill_rx_ring ( struct pcnet32_private *priv ) |
| { |
| struct pcnet32_rx_desc *rx_curr_desc; |
| u16 status; |
| int i; |
| |
| DBGP ( "pcnet32_refill_rx_ring\n" ); |
| |
| for ( i = 0; i < RX_RING_SIZE; i++ ) { |
| rx_curr_desc = priv->rx_base + i; |
| |
| status = le16_to_cpu ( rx_curr_desc->status ); |
| |
| /* Don't touch descriptors owned by the hardware */ |
| if ( status & DescOwn ) |
| continue; |
| |
| /* Descriptors with iobufs still need to be processed */ |
| if ( priv->rx_iobuf[i] != NULL ) |
| continue; |
| |
| /* If alloc_iob fails, try again later (next poll) */ |
| if ( ! ( priv->rx_iobuf[i] = alloc_iob ( PKT_BUF_SIZE ) ) ) { |
| DBG ( "Refill rx ring failed\n" ); |
| break; |
| } |
| |
| rx_curr_desc->base = |
| cpu_to_le32 ( virt_to_bus ( priv->rx_iobuf[i]->data ) ); |
| rx_curr_desc->buf_length = cpu_to_le16 ( -PKT_BUF_SIZE ); |
| rx_curr_desc->msg_length = rx_curr_desc->reserved = 0; |
| |
| /* Owner changes after the other status fields are set */ |
| wmb(); |
| rx_curr_desc->status = cpu_to_le16 ( DescOwn ); |
| } |
| |
| } |
| |
| /** |
| * pcnet32_setup_rx_resources - allocate Rx resources (Descriptors) |
| * |
| * @v priv Driver private structure |
| * |
| * @ret rc Returns 0 on success, negative on failure |
| */ |
| static int |
| pcnet32_setup_rx_resources ( struct pcnet32_private *priv ) |
| { |
| DBGP ( "pcnet32_setup_rx_resources\n" ); |
| |
| priv->rx_base = malloc_phys ( RX_RING_BYTES, RX_RING_ALIGN ); |
| |
| DBG ( "priv->rx_base = %#08lx\n", virt_to_bus ( priv->rx_base ) ); |
| |
| if ( ! priv->rx_base ) { |
| return -ENOMEM; |
| } |
| |
| memset ( priv->rx_base, 0, RX_RING_BYTES ); |
| |
| pcnet32_refill_rx_ring ( priv ); |
| |
| priv->rx_curr = 0; |
| |
| return 0; |
| } |
| |
| static void |
| pcnet32_free_rx_resources ( struct pcnet32_private *priv ) |
| { |
| int i; |
| |
| DBGP ( "pcnet32_free_rx_resources\n" ); |
| |
| free_phys ( priv->rx_base, RX_RING_BYTES ); |
| |
| for ( i = 0; i < RX_RING_SIZE; i++ ) { |
| free_iob ( priv->rx_iobuf[i] ); |
| priv->rx_iobuf[i] = NULL; |
| } |
| } |
| |
| /** |
| * pcnet32_setup_tx_resources - allocate Tx resources (Descriptors) |
| * |
| * @v priv Driver private structure |
| * |
| * @ret rc Returns 0 on success, negative on failure |
| */ |
| static int |
| pcnet32_setup_tx_resources ( struct pcnet32_private *priv ) |
| { |
| DBGP ( "pcnet32_setup_tx_resources\n" ); |
| |
| priv->tx_base = malloc_phys ( TX_RING_BYTES, TX_RING_ALIGN ); |
| |
| if ( ! priv->tx_base ) { |
| return -ENOMEM; |
| } |
| |
| memset ( priv->tx_base, 0, TX_RING_BYTES ); |
| |
| DBG ( "priv->tx_base = %#08lx\n", virt_to_bus ( priv->tx_base ) ); |
| |
| priv->tx_curr = 0; |
| priv->tx_fill_ctr = 0; |
| priv->tx_tail = 0; |
| |
| return 0; |
| } |
| |
| static void |
| pcnet32_free_tx_resources ( struct pcnet32_private *priv ) |
| { |
| DBGP ( "pcnet32_free_tx_resources\n" ); |
| |
| free_phys ( priv->tx_base, TX_RING_BYTES ); |
| } |
| |
| static int |
| pcnet32_chip_detect ( struct pcnet32_private *priv ) |
| { |
| int fdx, mii, fset; |
| int media; |
| int rc; |
| unsigned long ioaddr; |
| struct pcnet32_access *a; |
| int chip_version; |
| char *chipname; |
| |
| ioaddr = priv->pci_dev->ioaddr; |
| a = priv->a; |
| |
| chip_version = a->read_csr ( ioaddr, 88 ) |
| | ( a->read_csr ( ioaddr, 89 ) << 16 ); |
| |
| rc = -ENODEV; |
| |
| DBG ( "PCnet chip version is 0x%X\n", chip_version ); |
| if ( ( chip_version & 0xfff ) != 0x003 ) |
| goto err_unsupported; |
| |
| fdx = mii = fset = 0; |
| chip_version = ( chip_version >> 12 ) & 0xffff; |
| |
| switch (chip_version) { |
| case 0x2420: |
| chipname = "PCnet/PCI 79C970"; |
| break; |
| case 0x2430: |
| /* 970 gives the wrong chip id back */ |
| chipname = "PCnet/PCI 79C970"; |
| break; |
| case 0x2621: |
| chipname = "PCnet/PCI II 79C970A"; |
| fdx = 1; |
| break; |
| case 0x2623: |
| chipname = "PCnet/FAST 79C971"; |
| fdx = 1; |
| mii = 1; |
| fset = 1; |
| break; |
| case 0x2624: |
| chipname = "PCnet/FAST+ 79C972"; |
| fdx = 1; |
| mii = 1; |
| fset = 1; |
| break; |
| case 0x2625: |
| chipname = "PCnet/FAST III 79C973"; |
| fdx = 1; |
| mii = 1; |
| break; |
| case 0x2626: |
| chipname = "PCnet/Home 79C978"; |
| fdx = 1; |
| /* |
| * This is based on specs published at www.amd.com. This section |
| * assumes that a NIC with a 79C978 wants to go into 1Mb HomePNA |
| * mode. The 79C978 can also go into standard ethernet, and |
| * there probably should be some sort of module option to select |
| * the mode by which the card should operate |
| */ |
| /* switch to home wiring mode */ |
| media = a->read_bcr(ioaddr, 49); |
| |
| DBG ( "media reset to %#x.\n", media ); |
| a->write_bcr(ioaddr, 49, media); |
| break; |
| case 0x2627: |
| chipname = "PCnet/FAST III 79C975"; |
| fdx = 1; |
| mii = 1; |
| break; |
| case 0x2628: |
| chipname = "PCnet/PRO 79C976"; |
| fdx = 1; |
| mii = 1; |
| break; |
| default: |
| chipname = "UNKNOWN"; |
| DBG ( "PCnet version %#x, no PCnet32 chip.\n", chip_version ); |
| goto err_unsupported; |
| } |
| |
| DBG ( "PCnet chipname %s\n", chipname ); |
| |
| /* |
| * On selected chips turn on the BCR18:NOUFLO bit. This stops transmit |
| * starting until the packet is loaded. Strike one for reliability, lose |
| * one for latency - although on PCI this isn't a big loss. Older chips |
| * have FIFO's smaller than a packet, so you can't do this. |
| * Turn on BCR18:BurstRdEn and BCR18:BurstWrEn. |
| */ |
| if (fset) { |
| a->write_bcr ( ioaddr, 18, |
| ( a->read_bcr ( ioaddr, 18 ) | 0x0860 ) ); |
| a->write_csr ( ioaddr, 80, 0x0c00 ); |
| } |
| |
| priv->full_duplex = fdx; |
| priv->mii = mii; |
| |
| return 0; |
| |
| err_unsupported: |
| return rc; |
| } |
| |
| /** |
| * pcnet32_set_ops - Determines the ops used to access the registers |
| * |
| * @v priv Driver private structure |
| * |
| * @ret rc Returns 0 on success, negative on failure |
| */ |
| static int |
| pcnet32_set_ops ( struct pcnet32_private *priv ) |
| { |
| int rc; |
| unsigned long ioaddr; |
| |
| ioaddr = priv->pci_dev->ioaddr; |
| |
| /* Check if CSR0 has its default value and perform a write / read |
| in the RAP register to see if it works. Based on these results |
| determine what mode the NIC is in (WIO / DWIO) |
| */ |
| rc = -ENODEV; |
| |
| if ( pcnet32_wio_read_csr ( ioaddr, 0 ) == 4 && |
| pcnet32_wio_check ( ioaddr ) ) { |
| priv->a = &pcnet32_wio; |
| } else { |
| pcnet32_dwio_reset ( ioaddr ); |
| if ( pcnet32_dwio_read_csr ( ioaddr, 0 ) == 4 && |
| pcnet32_dwio_check ( ioaddr ) ) { |
| priv->a = &pcnet32_dwio; |
| } else { |
| goto err_unsupported; |
| } |
| } |
| |
| return 0; |
| |
| err_unsupported: |
| return rc; |
| } |
| |
| /** |
| * pcnet32_setup_init_block - setup the NICs initialization block |
| * |
| * @v priv Driver private structure |
| * |
| * @ret rc Returns 0 on success, negative on failure |
| */ |
| static void |
| pcnet32_setup_init_block ( struct pcnet32_private *priv ) |
| { |
| int i; |
| |
| /* Configure the network port based on what we've established so far */ |
| priv->init_block.mode = |
| cpu_to_le16 ( ( priv->options & PCNET32_PORT_PORTSEL ) << 7 ); |
| |
| /* Setup RLEN and TLEN fields */ |
| priv->init_block.tlen_rlen = |
| cpu_to_le16 ( ( PCNET32_LOG_RX_BUFFERS << 4 ) | |
| ( PCNET32_LOG_TX_BUFFERS << 12 ) ); |
| |
| /* Fill in physical address */ |
| for ( i = 0; i < ETH_ALEN; i++) |
| priv->init_block.phys_addr[i] = priv->netdev->hw_addr[i]; |
| |
| /* No multicasting scheme, accept everything */ |
| priv->init_block.filter[0] = 0xffffffff; |
| priv->init_block.filter[1] = 0xffffffff; |
| |
| priv->init_block.rx_ring = |
| cpu_to_le32 ( virt_to_bus ( priv->rx_base ) ); |
| priv->init_block.tx_ring = |
| cpu_to_le32 ( virt_to_bus ( priv->tx_base ) ); |
| |
| /* Make sure all changes are visible */ |
| wmb(); |
| } |
| |
| /** |
| * pcnet32_setup_probe_phy - go through all PHYs and see which one is present |
| * |
| * @v priv Driver private structure |
| */ |
| static void |
| pcnet32_setup_probe_phy ( struct pcnet32_private *priv ) |
| { |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| unsigned int phycount = 0; |
| int phy_id; |
| int i; |
| |
| if ( priv->mii ) { |
| phy_id = ( ( priv->a->read_bcr ( ioaddr, 33 ) ) >> 5 ) & 0x1f; |
| for ( i = 0; i < PCNET32_MAX_PHYS; i++ ) { |
| unsigned short id1, id2; |
| id1 = pcnet32_mdio_read ( priv->netdev, i, MII_PHYSID1 ); |
| if ( id1 == 0xffff ) |
| continue; |
| id2 = pcnet32_mdio_read ( priv->netdev, i, MII_PHYSID2 ); |
| if ( id2 == 0xffff ) |
| continue; |
| if ( i == 31 && ( ( priv->chip_version + 1 ) & 0xfffe ) == 0x2624 ) |
| continue; |
| |
| phycount++; |
| phy_id = i; |
| } |
| priv->a->write_bcr ( ioaddr, 33, phy_id << 5 ); |
| if ( phycount > 1 ) |
| priv->options |= PCNET32_PORT_MII; |
| } |
| } |
| |
| /** |
| * pcnet32_setup_mac_addr - check for inconsistency between CSR12-14 |
| * and PROM addresses |
| * |
| * @v priv Driver private structure |
| */ |
| static int |
| pcnet32_setup_mac_addr ( struct pcnet32_private *priv ) |
| { |
| int i; |
| u8 promaddr[ETH_ALEN]; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| |
| /* In most chips, after a chip reset, the ethernet address is read from |
| * the station address PROM at the base address and programmed into the |
| * "Physical Address Registers" CSR12-14. |
| * As a precautionary measure, we read the PROM values and complain if |
| * they disagree with the CSRs. If they miscompare, and the PROM addr |
| * is valid, then the PROM addr is used. |
| */ |
| for ( i = 0; i < 3; i++ ) { |
| unsigned int val; |
| val = priv->a->read_csr ( ioaddr, i + 12 ) & 0x0ffff; |
| /* There may be endianness issues here. */ |
| priv->netdev->hw_addr[2 * i] = val & 0x0ff; |
| priv->netdev->hw_addr[2 * i + 1] = ( val >> 8 ) & 0x0ff; |
| } |
| |
| for ( i = 0; i < ETH_ALEN; i++ ) |
| promaddr[i] = inb ( ioaddr + i ); |
| |
| if ( memcmp ( promaddr, priv->netdev->hw_addr, ETH_ALEN ) || |
| ! is_valid_ether_addr ( priv->netdev->hw_addr ) ) { |
| if ( is_valid_ether_addr ( promaddr ) ) { |
| DBG ( "CSR address is invalid, using PROM addr\n" ); |
| memcpy ( priv->netdev->hw_addr, promaddr, ETH_ALEN ); |
| } |
| } |
| |
| /* If ethernet address is not valid, return error */ |
| if ( ! is_valid_ether_addr ( priv->netdev->hw_addr ) ) |
| return -EADDRNOTAVAIL; |
| |
| return 0; |
| } |
| |
| /** |
| * pcnet32_setup_if_duplex - Sets the NICs used interface and duplex mode |
| * |
| * @v priv Driver private structure |
| */ |
| static void |
| pcnet32_setup_if_duplex ( struct pcnet32_private *priv ) |
| { |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| u16 val; |
| |
| /* Set/Reset autoselect bit */ |
| val = priv->a->read_bcr ( ioaddr, 2 ) & ~2; |
| if ( priv->options & PCNET32_PORT_ASEL ) |
| val |= 2; |
| priv->a->write_bcr ( ioaddr, 2, val ); |
| |
| /* Handle full duplex setting */ |
| if ( priv->full_duplex ) { |
| val = priv->a->read_bcr ( ioaddr, 9 ) & ~3; |
| if ( priv->options & PCNET32_PORT_FD ) { |
| val |= 1; |
| if ( priv->options == ( PCNET32_PORT_FD | PCNET32_PORT_AUI ) ) |
| val |= 2; |
| } else if ( priv->options & PCNET32_PORT_ASEL ) { |
| /* Workaround of xSeries 250, on for 79C975 only */ |
| if ( priv->chip_version == 0x2627 ) |
| val |= 3; |
| } |
| priv->a->write_bcr ( ioaddr, 9, val ); |
| } |
| |
| /* Set/Reset GPSI bit in test register */ |
| val = priv->a->read_csr ( ioaddr, 124 ) & ~0x10; |
| if ( ( priv->options & PCNET32_PORT_PORTSEL ) == PCNET32_PORT_GPSI ) |
| val |= 0x10; |
| priv->a->write_bcr ( ioaddr, 124, val ); |
| |
| /* Allied Telesyn AT are 100Mbit only and do not negotiate */ |
| u16 subsys_vend_id, subsys_dev_id; |
| pci_read_config_word ( priv->pci_dev, |
| PCI_SUBSYSTEM_VENDOR_ID, |
| &subsys_vend_id ); |
| pci_read_config_word ( priv->pci_dev, |
| PCI_SUBSYSTEM_ID, |
| &subsys_dev_id ); |
| if ( subsys_vend_id == PCI_VENDOR_ID_AT && |
| ( ( subsys_dev_id == PCI_SUBDEVICE_ID_AT_2700FX ) || |
| ( subsys_dev_id == PCI_SUBDEVICE_ID_AT_2701FX ) ) ) { |
| priv->options = PCNET32_PORT_FD | PCNET32_PORT_100; |
| } |
| |
| if ( priv->mii && ! ( priv->options & PCNET32_PORT_ASEL ) ) { |
| /* Disable Auto Negotiation, set 10Mbps, HD */ |
| val = priv->a->read_bcr ( ioaddr, 32 ) & ~0x38; |
| if ( priv->options & PCNET32_PORT_FD ) |
| val |= 0x10; |
| if ( priv->options & PCNET32_PORT_100 ) |
| val |= 0x08; |
| priv->a->write_bcr ( ioaddr, 32, val ); |
| } else if ( priv->options & PCNET32_PORT_ASEL ) { |
| /* 79C970 chips do not have the BCR32 register */ |
| if ( ( priv->chip_version != 0x2420 ) && |
| ( priv->chip_version != 0x2621 ) ) { |
| /* Enable Auto Negotiation, setup, disable FD */ |
| val = priv->a->read_bcr ( ioaddr, 32 ) & ~0x98; |
| val |= 0x20; |
| priv->a->write_bcr ( ioaddr, 32, val ); |
| } |
| } |
| } |
| |
| /** |
| * pcnet32_hw_start - Starts up the NIC |
| * |
| * @v priv Driver private structure |
| */ |
| static void |
| pcnet32_hw_start ( struct pcnet32_private *priv ) |
| { |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| int i; |
| |
| /* Begin initialization procedure */ |
| priv->a->write_csr ( ioaddr, 0, Init ); |
| |
| /* Wait for the initialization to be done */ |
| i = 0; |
| while ( i++ < 100 ) |
| if ( priv->a->read_csr ( ioaddr, 0 ) & InitDone ) |
| break; |
| |
| /* Start the chip */ |
| priv->a->write_csr ( ioaddr, 0, Strt ); |
| } |
| |
| /** |
| * open - Called when a network interface is made active |
| * |
| * @v netdev Network device |
| * @ret rc Return status code, 0 on success, negative value on failure |
| **/ |
| static int |
| pcnet32_open ( struct net_device *netdev ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| int rc; |
| u16 val; |
| |
| /* Setup TX and RX descriptors */ |
| if ( ( rc = pcnet32_setup_tx_resources ( priv ) ) != 0 ) { |
| DBG ( "Error setting up TX resources\n" ); |
| goto err_setup_tx; |
| } |
| |
| if ( ( rc = pcnet32_setup_rx_resources ( priv ) ) != 0 ) { |
| DBG ( "Error setting up RX resources\n" ); |
| goto err_setup_rx; |
| } |
| |
| /* Reset the chip */ |
| priv->a->reset ( ioaddr ); |
| |
| /* Switch pcnet32 to 32bit mode */ |
| priv->a->write_bcr ( ioaddr, 20, PCNET32_SWSTYLE_PCNET32 ); |
| |
| /* Setup the interface and duplex mode */ |
| pcnet32_setup_if_duplex ( priv ); |
| |
| /* Disable interrupts */ |
| val = priv->a->read_csr ( ioaddr, 3 ); |
| val |= BablMask | MissFrameMask | RxIntMask | TxIntMask | InitDoneMask; |
| priv->a->write_csr ( ioaddr, 3, val ); |
| |
| /* Setup initialization block */ |
| pcnet32_setup_init_block ( priv ); |
| |
| /* Fill in the address of the initialization block */ |
| priv->a->write_csr ( ioaddr, 1, |
| ( virt_to_bus ( &priv->init_block ) ) & 0xffff ); |
| priv->a->write_csr ( ioaddr, 2, |
| ( virt_to_bus ( &priv->init_block ) ) >> 16 ); |
| |
| /* Enable Auto-Pad, disable interrupts */ |
| priv->a->write_csr ( ioaddr, 4, 0x0915 ); |
| |
| pcnet32_hw_start ( priv ); |
| |
| return 0; |
| |
| err_setup_rx: |
| pcnet32_free_tx_resources ( priv ); |
| err_setup_tx: |
| priv->a->reset( priv->pci_dev->ioaddr ); |
| return rc; |
| } |
| |
| /** |
| * transmit - Transmit a packet |
| * |
| * @v netdev Network device |
| * @v iobuf I/O buffer |
| * |
| * @ret rc Returns 0 on success, negative on failure |
| */ |
| static int |
| pcnet32_transmit ( struct net_device *netdev, struct io_buffer *iobuf ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| uint32_t tx_len = iob_len ( iobuf ); |
| struct pcnet32_tx_desc *tx_curr_desc; |
| |
| DBGP ( "pcnet32_transmit\n" ); |
| |
| if ( priv->tx_fill_ctr == TX_RING_SIZE ) { |
| DBG ( "Tx overflow\n" ); |
| return -ENOTSUP; |
| } |
| |
| priv->tx_iobuf[priv->tx_curr] = iobuf; |
| |
| tx_curr_desc = priv->tx_base + priv->tx_curr; |
| |
| /* Configure current descriptor to transmit packet */ |
| tx_curr_desc->length = cpu_to_le16 ( -tx_len ); |
| tx_curr_desc->misc = 0x00000000; |
| tx_curr_desc->base = cpu_to_le32 ( virt_to_bus ( iobuf->data ) ); |
| |
| /* Owner changes after the other status fields are set */ |
| wmb(); |
| tx_curr_desc->status = |
| cpu_to_le16 ( DescOwn | StartOfPacket | EndOfPacket ); |
| |
| /* Trigger an immediate send poll */ |
| priv->a->write_csr ( ioaddr, 0, |
| ( priv->irq_enabled ? IntEnable : 0 ) | TxDemand ); |
| |
| /* Point to the next free descriptor */ |
| priv->tx_curr = ( priv->tx_curr + 1 ) % TX_RING_SIZE; |
| |
| /* Increment number of tx descriptors in use */ |
| priv->tx_fill_ctr++; |
| |
| return 0; |
| } |
| |
| /** |
| * pcnet32_process_tx_packets - Checks for successfully sent packets, |
| * reports them to iPXE with netdev_tx_complete() |
| * |
| * @v netdev Network device |
| */ |
| static void |
| pcnet32_process_tx_packets ( struct net_device *netdev ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| struct pcnet32_tx_desc *tx_curr_desc; |
| |
| DBGP ( "pcnet32_process_tx_packets\n" ); |
| |
| while ( priv->tx_tail != priv->tx_curr ) { |
| tx_curr_desc = priv->tx_base + priv->tx_tail; |
| |
| u16 status = le16_to_cpu ( tx_curr_desc->status ); |
| |
| DBG ( "Before OWN bit check, status: %#08x\n", status ); |
| |
| /* Skip this descriptor if hardware still owns it */ |
| if ( status & DescOwn ) |
| break; |
| |
| DBG ( "Transmitted packet.\n" ); |
| DBG ( "priv->tx_fill_ctr= %d\n", priv->tx_fill_ctr ); |
| DBG ( "priv->tx_tail = %d\n", priv->tx_tail ); |
| DBG ( "priv->tx_curr = %d\n", priv->tx_curr ); |
| DBG ( "tx_curr_desc = %#08lx\n", virt_to_bus ( tx_curr_desc ) ); |
| |
| /* This packet is ready for completion */ |
| netdev_tx_complete ( netdev, priv->tx_iobuf[priv->tx_tail]); |
| |
| /* Clear the descriptor */ |
| memset ( tx_curr_desc, 0, sizeof(*tx_curr_desc) ); |
| |
| /* Reduce the number of tx descriptors in use */ |
| priv->tx_fill_ctr--; |
| |
| /* Go to next available descriptor */ |
| priv->tx_tail = ( priv->tx_tail + 1 ) % TX_RING_SIZE; |
| } |
| } |
| |
| /** |
| * pcnet32_process_rx_packets - Checks for received packets, reports them |
| * to iPXE with netdev_rx() or netdev_rx_err() if there was an error receiving |
| * the packet |
| * |
| * @v netdev Network device |
| */ |
| static void |
| pcnet32_process_rx_packets ( struct net_device *netdev ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| struct pcnet32_rx_desc *rx_curr_desc; |
| u16 status; |
| u32 len; |
| int i; |
| |
| DBGP ( "pcnet32_process_rx_packets\n" ); |
| |
| for ( i = 0; i < RX_RING_SIZE; i++ ) { |
| rx_curr_desc = priv->rx_base + priv->rx_curr; |
| |
| status = le16_to_cpu ( rx_curr_desc->status ); |
| rmb(); |
| |
| DBG ( "Before OWN bit check, status: %#08x\n", status ); |
| |
| /* Skip this descriptor if hardware still owns it */ |
| if ( status & DescOwn ) |
| break; |
| |
| /* We own the descriptor, but it has not been refilled yet */ |
| if ( priv->rx_iobuf[priv->rx_curr] == NULL ) |
| break; |
| |
| DBG ( "Received packet.\n" ); |
| DBG ( "priv->rx_curr = %d\n", priv->rx_curr ); |
| DBG ( "rx_len = %d\n", |
| ( le32_to_cpu ( rx_curr_desc->msg_length ) & 0xfff ) - 4 ); |
| DBG ( "rx_curr_desc = %#08lx\n", |
| virt_to_bus ( rx_curr_desc ) ); |
| |
| /* Check ERR bit */ |
| if ( status & 0x4000 ) { |
| netdev_rx_err ( netdev, priv->rx_iobuf[priv->rx_curr], |
| -EINVAL ); |
| DBG ( "Corrupted packet received!\n"); |
| } else { |
| /* Adjust size of the iobuf to reflect received data */ |
| len = ( le32_to_cpu ( rx_curr_desc->msg_length ) & 0xfff ) - 4; |
| iob_put ( priv->rx_iobuf[priv->rx_curr], len ); |
| |
| /* Add this packet to the receive queue */ |
| netdev_rx ( netdev, priv->rx_iobuf[priv->rx_curr] ); |
| } |
| |
| /* Invalidate iobuf and descriptor */ |
| priv->rx_iobuf[priv->rx_curr] = NULL; |
| memset ( rx_curr_desc, 0, sizeof(*rx_curr_desc) ); |
| |
| /* Point to the next free descriptor */ |
| priv->rx_curr = ( priv->rx_curr + 1 ) % RX_RING_SIZE; |
| } |
| |
| /* Allocate new iobufs where needed */ |
| pcnet32_refill_rx_ring ( priv ); |
| } |
| |
| /** |
| * poll - Poll for received packets |
| * |
| * @v netdev Network device |
| */ |
| static void |
| pcnet32_poll ( struct net_device *netdev ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| u16 status; |
| |
| DBGP ( "pcnet32_poll\n" ); |
| |
| status = priv->a->read_csr ( ioaddr, 0 ); |
| |
| /* Clear interrupts */ |
| priv->a->write_csr ( ioaddr, 0, status ); |
| |
| DBG ( "pcnet32_poll: mask = %#04x, status = %#04x\n", |
| priv->a->read_csr ( ioaddr, 3 ), status ); |
| |
| /* Return when RINT or TINT are not set */ |
| if ( ( status & 0x0500 ) == 0x0000 ) |
| return; |
| |
| /* Process transmitted packets */ |
| pcnet32_process_tx_packets ( netdev ); |
| |
| /* Process received packets */ |
| pcnet32_process_rx_packets ( netdev ); |
| } |
| |
| /** |
| * close - Disable network interface |
| * |
| * @v netdev network interface device structure |
| **/ |
| static void |
| pcnet32_close ( struct net_device *netdev ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| |
| DBGP ( "pcnet32_close\n" ); |
| |
| /* Reset the chip */ |
| pcnet32_wio_reset ( ioaddr ); |
| |
| /* Stop the PCNET32 - it occasionally polls memory if we don't */ |
| priv->a->write_csr ( ioaddr, 0, Stop ); |
| |
| /* Switch back to 16bit mode to avoid problems with dumb |
| * DOS packet driver after a warm reboot */ |
| priv->a->write_bcr ( ioaddr, 20, PCNET32_SWSTYLE_LANCE ); |
| |
| pcnet32_free_rx_resources ( priv ); |
| pcnet32_free_tx_resources ( priv ); |
| } |
| |
| static void pcnet32_irq_enable ( struct pcnet32_private *priv ) |
| { |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| u16 val; |
| |
| DBGP ( "pcnet32_irq_enable\n" ); |
| |
| /* Enable TINT and RINT masks */ |
| val = priv->a->read_csr ( ioaddr, 3 ); |
| val &= ~( RxIntMask | TxIntMask ); |
| priv->a->write_csr ( ioaddr, 3, val ); |
| |
| /* Enable interrupts */ |
| priv->a->write_csr ( ioaddr, 0, IntEnable ); |
| |
| priv->irq_enabled = 1; |
| } |
| |
| static void pcnet32_irq_disable ( struct pcnet32_private *priv ) |
| { |
| unsigned long ioaddr = priv->pci_dev->ioaddr; |
| |
| DBGP ( "pcnet32_irq_disable\n" ); |
| |
| priv->a->write_csr ( ioaddr, 0, 0x0000 ); |
| |
| priv->irq_enabled = 0; |
| } |
| |
| /** |
| * irq - enable or disable interrupts |
| * |
| * @v netdev network adapter |
| * @v action requested interrupt action |
| **/ |
| static void |
| pcnet32_irq ( struct net_device *netdev, int action ) |
| { |
| struct pcnet32_private *priv = netdev->priv; |
| |
| DBGP ( "pcnet32_irq\n" ); |
| |
| switch ( action ) { |
| case 0: |
| pcnet32_irq_disable ( priv ); |
| break; |
| default: |
| pcnet32_irq_enable ( priv ); |
| break; |
| } |
| } |
| |
| static struct net_device_operations pcnet32_operations = { |
| .open = pcnet32_open, |
| .transmit = pcnet32_transmit, |
| .poll = pcnet32_poll, |
| .close = pcnet32_close, |
| .irq = pcnet32_irq, |
| }; |
| |
| /** |
| * probe - Initial configuration of NIC |
| * |
| * @v pdev PCI device |
| * @v ent PCI IDs |
| * |
| * @ret rc Return status code |
| **/ |
| static int |
| pcnet32_probe ( struct pci_device *pdev ) |
| { |
| struct net_device *netdev; |
| struct pcnet32_private *priv; |
| unsigned long ioaddr; |
| int rc; |
| |
| DBGP ( "pcnet32_probe\n" ); |
| |
| DBG ( "Found %s, vendor = %#04x, device = %#04x\n", |
| pdev->id->name, pdev->id->vendor, pdev->id->device ); |
| |
| /* Allocate our private data */ |
| netdev = alloc_etherdev ( sizeof ( *priv ) ); |
| if ( ! netdev ) { |
| rc = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| |
| /* Link our operations to the netdev struct */ |
| netdev_init ( netdev, &pcnet32_operations ); |
| |
| /* Link the PCI device to the netdev struct */ |
| pci_set_drvdata ( pdev, netdev ); |
| netdev->dev = &pdev->dev; |
| |
| /* Get a reference to our private data */ |
| priv = netdev->priv; |
| |
| /* We'll need these set up for the rest of the routines */ |
| priv->pci_dev = pdev; |
| priv->netdev = netdev; |
| |
| ioaddr = pdev->ioaddr; |
| |
| /* Only use irqs under UNDI */ |
| priv->irq_enabled = 0; |
| |
| /* Reset the chip */ |
| pcnet32_wio_reset ( ioaddr ); |
| |
| if ( ( rc = pcnet32_set_ops ( priv ) ) != 0 ) { |
| DBG ( "Setting driver operations failed\n"); |
| goto err_set_ops; |
| } |
| |
| if ( ( rc = pcnet32_chip_detect ( priv ) ) != 0 ) { |
| DBG ( "pcnet32_chip_detect failed\n" ); |
| goto err_chip_detect; |
| } |
| |
| /* Enter bus mastering mode */ |
| adjust_pci_device ( pdev ); |
| |
| /* Verify and get MAC address */ |
| if ( ( rc = pcnet32_setup_mac_addr ( priv ) ) != 0 ) { |
| DBG ( "Setting MAC address failed\n" ); |
| goto err_mac_addr; |
| } |
| |
| DBG ( "IO Addr 0x%lX, MAC Addr %s\n", ioaddr, |
| eth_ntoa ( netdev->hw_addr ) ); |
| |
| priv->options = PCNET32_PORT_ASEL; |
| |
| /* Detect special T1/E1 WAN card by checking for MAC address */ |
| if ( netdev->hw_addr[0] == 0x00 && |
| netdev->hw_addr[1] == 0xE0 && |
| netdev->hw_addr[2] == 0x75 ) |
| priv->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI; |
| |
| /* Probe the PHY so we can check link state and speed */ |
| pcnet32_setup_probe_phy ( priv ); |
| |
| if ( ( rc = register_netdev ( netdev ) ) != 0 ) { |
| DBG ( "Error registering netdev\n" ); |
| goto err_register; |
| } |
| |
| netdev_link_up ( netdev ); |
| |
| return 0; |
| |
| err_register: |
| netdev_put ( netdev ); |
| err_chip_detect: |
| err_set_ops: |
| err_alloc_etherdev: |
| err_mac_addr: |
| return rc; |
| } |
| |
| /** |
| * remove - Device Removal Routine |
| * |
| * @v pdev PCI device information struct |
| **/ |
| static void |
| pcnet32_remove ( struct pci_device *pdev ) |
| { |
| struct net_device *netdev = pci_get_drvdata ( pdev ); |
| unsigned long ioaddr = pdev->ioaddr; |
| |
| DBGP ( "pcnet32_remove\n" ); |
| |
| /* Reset the chip */ |
| pcnet32_wio_reset ( ioaddr ); |
| |
| unregister_netdev ( netdev ); |
| netdev_nullify ( netdev ); |
| netdev_put ( netdev ); |
| } |
| |
| static struct pci_device_id pcnet32_nics[] = { |
| PCI_ROM(0x1022, 0x2000, "pcnet32", "AMD PCnet/PCI", 0), |
| PCI_ROM(0x1022, 0x2001, "amdhomepna", "AMD PCnet/HomePNA", 0), |
| PCI_ROM(0x1022, 0x2625, "pcnetfastiii", "AMD PCNet FAST III", 0), |
| }; |
| |
| struct pci_driver pcnet32_driver __pci_driver = { |
| .ids = pcnet32_nics, |
| .id_count = ARRAY_SIZE ( pcnet32_nics ), |
| .probe = pcnet32_probe, |
| .remove = pcnet32_remove, |
| }; |