qemu /
ipxe /
c69f9589cc7543baba08dbabdb5c30104fadaa34 [usb] Expose USB device descriptor and strings via settings
Allow scripts to read basic information from USB device descriptors
via the settings mechanism. For example:
echo USB vendor ID: ${usb/${busloc}.8.2}
echo USB device ID: ${usb/${busloc}.10.2}
echo USB manufacturer name: ${usb/${busloc}.14.0}
The general syntax is
usb/<bus:dev>.<offset>.<length>
where bus:dev is the USB bus:device address (as obtained via the
"usbscan" command, or from e.g. ${net0/busloc} for a USB network
device), and <offset> and <length> select the required portion of the
USB device descriptor.
Following the usage of SMBIOS settings tags, a <length> of zero may be
used to indicate that the byte at <offset> contains a USB string
descriptor index, and an <offset> of zero may be used to indicate that
the <length> contains a literal USB string descriptor index.
Since the byte at offset zero can never contain a string index, and a
literal string index can never be zero, the combination of both
<length> and <offset> being zero may be used to indicate that the
entire device descriptor is to be read as a raw hex dump.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
6 files changed
