| /* |
| * Copyright (C) 2012 Michael Brown <mbrown@fensystems.co.uk>. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| * You can also choose to distribute this program under the terms of |
| * the Unmodified Binary Distribution Licence (as given in the file |
| * COPYING.UBDL), provided that you have satisfied its requirements. |
| */ |
| |
| FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL ); |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include <errno.h> |
| #include <byteswap.h> |
| #include <ipxe/netdevice.h> |
| #include <ipxe/ethernet.h> |
| #include <ipxe/if_ether.h> |
| #include <ipxe/iobuf.h> |
| #include <ipxe/dma.h> |
| #include <ipxe/pci.h> |
| #include <ipxe/profile.h> |
| #include "intel.h" |
| |
| /** @file |
| * |
| * Intel 10/100/1000 network card driver |
| * |
| */ |
| |
| /** VM transmit profiler */ |
| static struct profiler intel_vm_tx_profiler __profiler = |
| { .name = "intel.vm_tx" }; |
| |
| /** VM receive refill profiler */ |
| static struct profiler intel_vm_refill_profiler __profiler = |
| { .name = "intel.vm_refill" }; |
| |
| /** VM poll profiler */ |
| static struct profiler intel_vm_poll_profiler __profiler = |
| { .name = "intel.vm_poll" }; |
| |
| /****************************************************************************** |
| * |
| * EEPROM interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Read data from EEPROM |
| * |
| * @v nvs NVS device |
| * @v address Address from which to read |
| * @v data Data buffer |
| * @v len Length of data buffer |
| * @ret rc Return status code |
| */ |
| static int intel_read_eeprom ( struct nvs_device *nvs, unsigned int address, |
| void *data, size_t len ) { |
| struct intel_nic *intel = |
| container_of ( nvs, struct intel_nic, eeprom ); |
| unsigned int i; |
| uint32_t value; |
| uint16_t *data_word = data; |
| |
| /* Sanity check. We advertise a blocksize of one word, so |
| * should only ever receive single-word requests. |
| */ |
| assert ( len == sizeof ( *data_word ) ); |
| |
| /* Initiate read */ |
| writel ( ( INTEL_EERD_START | ( address << intel->eerd_addr_shift ) ), |
| intel->regs + INTEL_EERD ); |
| |
| /* Wait for read to complete */ |
| for ( i = 0 ; i < INTEL_EEPROM_MAX_WAIT_MS ; i++ ) { |
| |
| /* If read is not complete, delay 1ms and retry */ |
| value = readl ( intel->regs + INTEL_EERD ); |
| if ( ! ( value & intel->eerd_done ) ) { |
| mdelay ( 1 ); |
| continue; |
| } |
| |
| /* Extract data */ |
| *data_word = cpu_to_le16 ( INTEL_EERD_DATA ( value ) ); |
| return 0; |
| } |
| |
| DBGC ( intel, "INTEL %p timed out waiting for EEPROM read\n", intel ); |
| return -ETIMEDOUT; |
| } |
| |
| /** |
| * Write data to EEPROM |
| * |
| * @v nvs NVS device |
| * @v address Address to which to write |
| * @v data Data buffer |
| * @v len Length of data buffer |
| * @ret rc Return status code |
| */ |
| static int intel_write_eeprom ( struct nvs_device *nvs, |
| unsigned int address __unused, |
| const void *data __unused, |
| size_t len __unused ) { |
| struct intel_nic *intel = |
| container_of ( nvs, struct intel_nic, eeprom ); |
| |
| DBGC ( intel, "INTEL %p EEPROM write not supported\n", intel ); |
| return -ENOTSUP; |
| } |
| |
| /** |
| * Initialise EEPROM |
| * |
| * @v intel Intel device |
| * @ret rc Return status code |
| */ |
| static int intel_init_eeprom ( struct intel_nic *intel ) { |
| unsigned int i; |
| uint32_t value; |
| |
| /* The NIC automatically detects the type of attached EEPROM. |
| * The EERD register provides access to only a single word at |
| * a time, so we pretend to have a single-word block size. |
| * |
| * The EEPROM size may be larger than the minimum size, but |
| * this doesn't matter to us since we access only the first |
| * few words. |
| */ |
| intel->eeprom.word_len_log2 = INTEL_EEPROM_WORD_LEN_LOG2; |
| intel->eeprom.size = INTEL_EEPROM_MIN_SIZE_WORDS; |
| intel->eeprom.block_size = 1; |
| intel->eeprom.read = intel_read_eeprom; |
| intel->eeprom.write = intel_write_eeprom; |
| |
| /* The layout of the EERD register was changed at some point |
| * to accommodate larger EEPROMs. Read from address zero (for |
| * which the request layouts are compatible) to determine |
| * which type of register we have. |
| */ |
| writel ( INTEL_EERD_START, intel->regs + INTEL_EERD ); |
| for ( i = 0 ; i < INTEL_EEPROM_MAX_WAIT_MS ; i++ ) { |
| value = readl ( intel->regs + INTEL_EERD ); |
| if ( value & INTEL_EERD_DONE_LARGE ) { |
| DBGC ( intel, "INTEL %p has large-format EERD\n", |
| intel ); |
| intel->eerd_done = INTEL_EERD_DONE_LARGE; |
| intel->eerd_addr_shift = INTEL_EERD_ADDR_SHIFT_LARGE; |
| return 0; |
| } |
| if ( value & INTEL_EERD_DONE_SMALL ) { |
| DBGC ( intel, "INTEL %p has small-format EERD\n", |
| intel ); |
| intel->eerd_done = INTEL_EERD_DONE_SMALL; |
| intel->eerd_addr_shift = INTEL_EERD_ADDR_SHIFT_SMALL; |
| return 0; |
| } |
| mdelay ( 1 ); |
| } |
| |
| DBGC ( intel, "INTEL %p timed out waiting for initial EEPROM read " |
| "(value %08x)\n", intel, value ); |
| return -ETIMEDOUT; |
| } |
| |
| /****************************************************************************** |
| * |
| * MAC address |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Fetch initial MAC address from EEPROM |
| * |
| * @v intel Intel device |
| * @v hw_addr Hardware address to fill in |
| * @ret rc Return status code |
| */ |
| static int intel_fetch_mac_eeprom ( struct intel_nic *intel, |
| uint8_t *hw_addr ) { |
| int rc; |
| |
| /* Initialise EEPROM */ |
| if ( ( rc = intel_init_eeprom ( intel ) ) != 0 ) |
| return rc; |
| |
| /* Read base MAC address from EEPROM */ |
| if ( ( rc = nvs_read ( &intel->eeprom, INTEL_EEPROM_MAC, |
| hw_addr, ETH_ALEN ) ) != 0 ) { |
| DBGC ( intel, "INTEL %p could not read EEPROM base MAC " |
| "address: %s\n", intel, strerror ( rc ) ); |
| return rc; |
| } |
| |
| /* Adjust MAC address for multi-port devices */ |
| hw_addr[ETH_ALEN-1] ^= intel->port; |
| |
| DBGC ( intel, "INTEL %p has EEPROM MAC address %s (port %d)\n", |
| intel, eth_ntoa ( hw_addr ), intel->port ); |
| return 0; |
| } |
| |
| /** |
| * Fetch initial MAC address |
| * |
| * @v intel Intel device |
| * @v hw_addr Hardware address to fill in |
| * @ret rc Return status code |
| */ |
| static int intel_fetch_mac ( struct intel_nic *intel, uint8_t *hw_addr ) { |
| union intel_receive_address mac; |
| int rc; |
| |
| /* Read current address from RAL0/RAH0 */ |
| mac.reg.low = cpu_to_le32 ( readl ( intel->regs + INTEL_RAL0 ) ); |
| mac.reg.high = cpu_to_le32 ( readl ( intel->regs + INTEL_RAH0 ) ); |
| DBGC ( intel, "INTEL %p has autoloaded MAC address %s\n", |
| intel, eth_ntoa ( mac.raw ) ); |
| |
| /* Use current address if valid */ |
| if ( is_valid_ether_addr ( mac.raw ) ) { |
| memcpy ( hw_addr, mac.raw, ETH_ALEN ); |
| return 0; |
| } |
| |
| /* Otherwise, try to read address from EEPROM */ |
| if ( ( rc = intel_fetch_mac_eeprom ( intel, hw_addr ) ) == 0 ) |
| return 0; |
| |
| DBGC ( intel, "INTEL %p has no MAC address to use\n", intel ); |
| return -ENOENT; |
| } |
| |
| /****************************************************************************** |
| * |
| * Device reset |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Reset hardware |
| * |
| * @v intel Intel device |
| * @ret rc Return status code |
| */ |
| static int intel_reset ( struct intel_nic *intel ) { |
| uint32_t pbs; |
| uint32_t pba; |
| uint32_t ctrl; |
| uint32_t status; |
| uint32_t orig_ctrl; |
| uint32_t orig_status; |
| |
| /* Record initial control and status register values */ |
| orig_ctrl = ctrl = readl ( intel->regs + INTEL_CTRL ); |
| orig_status = readl ( intel->regs + INTEL_STATUS ); |
| |
| /* Force RX and TX packet buffer allocation, to work around an |
| * errata in ICH devices. |
| */ |
| if ( intel->flags & INTEL_PBS_ERRATA ) { |
| DBGC ( intel, "INTEL %p WARNING: applying ICH PBS/PBA errata\n", |
| intel ); |
| pbs = readl ( intel->regs + INTEL_PBS ); |
| pba = readl ( intel->regs + INTEL_PBA ); |
| writel ( 0x08, intel->regs + INTEL_PBA ); |
| writel ( 0x10, intel->regs + INTEL_PBS ); |
| DBGC ( intel, "INTEL %p PBS %#08x->%#08x PBA %#08x->%#08x\n", |
| intel, pbs, readl ( intel->regs + INTEL_PBS ), |
| pba, readl ( intel->regs + INTEL_PBA ) ); |
| } |
| |
| /* The Intel I210's packet buffer size registers reset only on |
| * power up. If an operating system changes these but then |
| * the computer recieves a reset signal without losing power, |
| * the registers will stay the same (but be incompatible with |
| * other register defaults), thus making the device unable to |
| * pass traffic. |
| */ |
| if ( intel->flags & INTEL_PBSIZE_RST ) { |
| writel ( INTEL_RXPBS_I210, intel->regs + INTEL_RXPBS ); |
| writel ( INTEL_TXPBS_I210, intel->regs + INTEL_TXPBS ); |
| } |
| |
| /* Always reset MAC. Required to reset the TX and RX rings. */ |
| writel ( ( ctrl | INTEL_CTRL_RST ), intel->regs + INTEL_CTRL ); |
| mdelay ( INTEL_RESET_DELAY_MS ); |
| |
| /* Set a sensible default configuration */ |
| if ( ! ( intel->flags & INTEL_NO_ASDE ) ) |
| ctrl |= INTEL_CTRL_ASDE; |
| ctrl |= INTEL_CTRL_SLU; |
| ctrl &= ~( INTEL_CTRL_LRST | INTEL_CTRL_FRCSPD | INTEL_CTRL_FRCDPLX ); |
| writel ( ctrl, intel->regs + INTEL_CTRL ); |
| mdelay ( INTEL_RESET_DELAY_MS ); |
| |
| /* On some models (notably ICH), the PHY reset mechanism |
| * appears to be broken. In particular, the PHY_CTRL register |
| * will be correctly loaded from NVM but the values will not |
| * be propagated to the "OEM bits" PHY register. This |
| * typically has the effect of dropping the link speed to |
| * 10Mbps. |
| * |
| * Work around this problem by skipping the PHY reset if |
| * either (a) the link is already up, or (b) this particular |
| * NIC is known to be broken. |
| */ |
| status = readl ( intel->regs + INTEL_STATUS ); |
| if ( ( intel->flags & INTEL_NO_PHY_RST ) || |
| ( status & INTEL_STATUS_LU ) ) { |
| DBGC ( intel, "INTEL %p %sMAC reset (%08x/%08x was " |
| "%08x/%08x)\n", intel, |
| ( ( intel->flags & INTEL_NO_PHY_RST ) ? "forced " : "" ), |
| ctrl, status, orig_ctrl, orig_status ); |
| return 0; |
| } |
| |
| /* Reset PHY and MAC simultaneously */ |
| writel ( ( ctrl | INTEL_CTRL_RST | INTEL_CTRL_PHY_RST ), |
| intel->regs + INTEL_CTRL ); |
| mdelay ( INTEL_RESET_DELAY_MS ); |
| |
| /* PHY reset is not self-clearing on all models */ |
| writel ( ctrl, intel->regs + INTEL_CTRL ); |
| mdelay ( INTEL_RESET_DELAY_MS ); |
| status = readl ( intel->regs + INTEL_STATUS ); |
| |
| DBGC ( intel, "INTEL %p MAC+PHY reset (%08x/%08x was %08x/%08x)\n", |
| intel, ctrl, status, orig_ctrl, orig_status ); |
| return 0; |
| } |
| |
| /****************************************************************************** |
| * |
| * Link state |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Check link state |
| * |
| * @v netdev Network device |
| */ |
| static void intel_check_link ( struct net_device *netdev ) { |
| struct intel_nic *intel = netdev->priv; |
| uint32_t status; |
| |
| /* Read link status */ |
| status = readl ( intel->regs + INTEL_STATUS ); |
| DBGC ( intel, "INTEL %p link status is %08x\n", intel, status ); |
| |
| /* Update network device */ |
| if ( status & INTEL_STATUS_LU ) { |
| netdev_link_up ( netdev ); |
| } else { |
| netdev_link_down ( netdev ); |
| } |
| } |
| |
| /****************************************************************************** |
| * |
| * Descriptors |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Populate transmit descriptor |
| * |
| * @v tx Transmit descriptor |
| * @v addr Data buffer address |
| * @v len Length of data |
| */ |
| void intel_describe_tx ( struct intel_descriptor *tx, physaddr_t addr, |
| size_t len ) { |
| |
| /* Populate transmit descriptor */ |
| tx->address = cpu_to_le64 ( addr ); |
| tx->length = cpu_to_le16 ( len ); |
| tx->flags = 0; |
| tx->command = ( INTEL_DESC_CMD_RS | INTEL_DESC_CMD_IFCS | |
| INTEL_DESC_CMD_EOP ); |
| tx->status = 0; |
| } |
| |
| /** |
| * Populate advanced transmit descriptor |
| * |
| * @v tx Transmit descriptor |
| * @v addr Data buffer address |
| * @v len Length of data |
| */ |
| void intel_describe_tx_adv ( struct intel_descriptor *tx, physaddr_t addr, |
| size_t len ) { |
| |
| /* Populate advanced transmit descriptor */ |
| tx->address = cpu_to_le64 ( addr ); |
| tx->length = cpu_to_le16 ( len ); |
| tx->flags = INTEL_DESC_FL_DTYP_DATA; |
| tx->command = ( INTEL_DESC_CMD_DEXT | INTEL_DESC_CMD_RS | |
| INTEL_DESC_CMD_IFCS | INTEL_DESC_CMD_EOP ); |
| tx->status = cpu_to_le32 ( INTEL_DESC_STATUS_PAYLEN ( len ) ); |
| } |
| |
| /** |
| * Populate receive descriptor |
| * |
| * @v rx Receive descriptor |
| * @v addr Data buffer address |
| * @v len Length of data |
| */ |
| void intel_describe_rx ( struct intel_descriptor *rx, physaddr_t addr, |
| size_t len __unused ) { |
| |
| /* Populate transmit descriptor */ |
| rx->address = cpu_to_le64 ( addr ); |
| rx->length = 0; |
| rx->status = 0; |
| } |
| |
| /****************************************************************************** |
| * |
| * Network device interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Disable descriptor ring |
| * |
| * @v intel Intel device |
| * @v reg Register block |
| * @ret rc Return status code |
| */ |
| static int intel_disable_ring ( struct intel_nic *intel, unsigned int reg ) { |
| uint32_t dctl; |
| unsigned int i; |
| |
| /* Disable ring */ |
| writel ( 0, ( intel->regs + reg + INTEL_xDCTL ) ); |
| |
| /* Wait for disable to complete */ |
| for ( i = 0 ; i < INTEL_DISABLE_MAX_WAIT_MS ; i++ ) { |
| |
| /* Check if ring is disabled */ |
| dctl = readl ( intel->regs + reg + INTEL_xDCTL ); |
| if ( ! ( dctl & INTEL_xDCTL_ENABLE ) ) |
| return 0; |
| |
| /* Delay */ |
| mdelay ( 1 ); |
| } |
| |
| DBGC ( intel, "INTEL %p ring %05x timed out waiting for disable " |
| "(dctl %08x)\n", intel, reg, dctl ); |
| return -ETIMEDOUT; |
| } |
| |
| /** |
| * Reset descriptor ring |
| * |
| * @v intel Intel device |
| * @v reg Register block |
| * @ret rc Return status code |
| */ |
| void intel_reset_ring ( struct intel_nic *intel, unsigned int reg ) { |
| |
| /* Disable ring. Ignore errors and continue to reset the ring anyway */ |
| intel_disable_ring ( intel, reg ); |
| |
| /* Clear ring length */ |
| writel ( 0, ( intel->regs + reg + INTEL_xDLEN ) ); |
| |
| /* Clear ring address */ |
| writel ( 0, ( intel->regs + reg + INTEL_xDBAH ) ); |
| writel ( 0, ( intel->regs + reg + INTEL_xDBAL ) ); |
| |
| /* Reset head and tail pointers */ |
| writel ( 0, ( intel->regs + reg + INTEL_xDH ) ); |
| writel ( 0, ( intel->regs + reg + INTEL_xDT ) ); |
| } |
| |
| /** |
| * Create descriptor ring |
| * |
| * @v intel Intel device |
| * @v ring Descriptor ring |
| * @ret rc Return status code |
| */ |
| int intel_create_ring ( struct intel_nic *intel, struct intel_ring *ring ) { |
| physaddr_t address; |
| uint32_t dctl; |
| |
| /* Allocate descriptor ring. Align ring on its own size to |
| * prevent any possible page-crossing errors due to hardware |
| * errata. |
| */ |
| ring->desc = dma_alloc ( intel->dma, &ring->map, ring->len, |
| ring->len ); |
| if ( ! ring->desc ) |
| return -ENOMEM; |
| |
| /* Initialise descriptor ring */ |
| memset ( ring->desc, 0, ring->len ); |
| |
| /* Program ring address */ |
| address = dma ( &ring->map, ring->desc ); |
| writel ( ( address & 0xffffffffUL ), |
| ( intel->regs + ring->reg + INTEL_xDBAL ) ); |
| if ( sizeof ( physaddr_t ) > sizeof ( uint32_t ) ) { |
| writel ( ( ( ( uint64_t ) address ) >> 32 ), |
| ( intel->regs + ring->reg + INTEL_xDBAH ) ); |
| } else { |
| writel ( 0, intel->regs + ring->reg + INTEL_xDBAH ); |
| } |
| |
| /* Program ring length */ |
| writel ( ring->len, ( intel->regs + ring->reg + INTEL_xDLEN ) ); |
| |
| /* Reset head and tail pointers */ |
| writel ( 0, ( intel->regs + ring->reg + INTEL_xDH ) ); |
| writel ( 0, ( intel->regs + ring->reg + INTEL_xDT ) ); |
| |
| /* Enable ring */ |
| dctl = readl ( intel->regs + ring->reg + INTEL_xDCTL ); |
| dctl |= INTEL_xDCTL_ENABLE; |
| writel ( dctl, intel->regs + ring->reg + INTEL_xDCTL ); |
| |
| DBGC ( intel, "INTEL %p ring %05x is at [%08lx,%08lx)\n", |
| intel, ring->reg, virt_to_phys ( ring->desc ), |
| ( virt_to_phys ( ring->desc ) + ring->len ) ); |
| |
| return 0; |
| } |
| |
| /** |
| * Destroy descriptor ring |
| * |
| * @v intel Intel device |
| * @v ring Descriptor ring |
| */ |
| void intel_destroy_ring ( struct intel_nic *intel, struct intel_ring *ring ) { |
| |
| /* Reset ring */ |
| intel_reset_ring ( intel, ring->reg ); |
| |
| /* Free descriptor ring */ |
| dma_free ( &ring->map, ring->desc, ring->len ); |
| ring->desc = NULL; |
| ring->prod = 0; |
| ring->cons = 0; |
| } |
| |
| /** |
| * Refill receive descriptor ring |
| * |
| * @v intel Intel device |
| */ |
| void intel_refill_rx ( struct intel_nic *intel ) { |
| struct intel_descriptor *rx; |
| struct io_buffer *iobuf; |
| unsigned int rx_idx; |
| unsigned int rx_tail; |
| unsigned int refilled = 0; |
| |
| /* Refill ring */ |
| while ( ( intel->rx.prod - intel->rx.cons ) < INTEL_RX_FILL ) { |
| |
| /* Allocate I/O buffer */ |
| iobuf = alloc_rx_iob ( INTEL_RX_MAX_LEN, intel->dma ); |
| if ( ! iobuf ) { |
| /* Wait for next refill */ |
| break; |
| } |
| |
| /* Get next receive descriptor */ |
| rx_idx = ( intel->rx.prod++ % INTEL_NUM_RX_DESC ); |
| rx = &intel->rx.desc[rx_idx]; |
| |
| /* Populate receive descriptor */ |
| intel->rx.describe ( rx, iob_dma ( iobuf ), 0 ); |
| |
| /* Record I/O buffer */ |
| assert ( intel->rx_iobuf[rx_idx] == NULL ); |
| intel->rx_iobuf[rx_idx] = iobuf; |
| |
| DBGC2 ( intel, "INTEL %p RX %d is [%lx,%lx)\n", |
| intel, rx_idx, virt_to_phys ( iobuf->data ), |
| ( virt_to_phys ( iobuf->data ) + INTEL_RX_MAX_LEN ) ); |
| refilled++; |
| } |
| |
| /* Push descriptors to card, if applicable */ |
| if ( refilled ) { |
| wmb(); |
| rx_tail = ( intel->rx.prod % INTEL_NUM_RX_DESC ); |
| profile_start ( &intel_vm_refill_profiler ); |
| writel ( rx_tail, intel->regs + intel->rx.reg + INTEL_xDT ); |
| profile_stop ( &intel_vm_refill_profiler ); |
| profile_exclude ( &intel_vm_refill_profiler ); |
| } |
| } |
| |
| /** |
| * Discard unused receive I/O buffers |
| * |
| * @v intel Intel device |
| */ |
| void intel_empty_rx ( struct intel_nic *intel ) { |
| unsigned int i; |
| |
| /* Discard unused receive buffers */ |
| for ( i = 0 ; i < INTEL_NUM_RX_DESC ; i++ ) { |
| if ( intel->rx_iobuf[i] ) |
| free_rx_iob ( intel->rx_iobuf[i] ); |
| intel->rx_iobuf[i] = NULL; |
| } |
| } |
| |
| /** |
| * Open network device |
| * |
| * @v netdev Network device |
| * @ret rc Return status code |
| */ |
| static int intel_open ( struct net_device *netdev ) { |
| struct intel_nic *intel = netdev->priv; |
| union intel_receive_address mac; |
| uint32_t fextnvm11; |
| uint32_t tctl; |
| uint32_t rctl; |
| int rc; |
| |
| /* Set undocumented bit in FEXTNVM11 to work around an errata |
| * in i219 devices that will otherwise cause a complete |
| * datapath hang at the next device reset. |
| */ |
| if ( intel->flags & INTEL_RST_HANG ) { |
| DBGC ( intel, "INTEL %p WARNING: applying reset hang " |
| "workaround\n", intel ); |
| fextnvm11 = readl ( intel->regs + INTEL_FEXTNVM11 ); |
| fextnvm11 |= INTEL_FEXTNVM11_WTF; |
| writel ( fextnvm11, intel->regs + INTEL_FEXTNVM11 ); |
| } |
| |
| /* Create transmit descriptor ring */ |
| if ( ( rc = intel_create_ring ( intel, &intel->tx ) ) != 0 ) |
| goto err_create_tx; |
| |
| /* Create receive descriptor ring */ |
| if ( ( rc = intel_create_ring ( intel, &intel->rx ) ) != 0 ) |
| goto err_create_rx; |
| |
| /* Program MAC address */ |
| memset ( &mac, 0, sizeof ( mac ) ); |
| memcpy ( mac.raw, netdev->ll_addr, sizeof ( mac.raw ) ); |
| writel ( le32_to_cpu ( mac.reg.low ), intel->regs + INTEL_RAL0 ); |
| writel ( ( le32_to_cpu ( mac.reg.high ) | INTEL_RAH0_AV ), |
| intel->regs + INTEL_RAH0 ); |
| |
| /* Enable transmitter */ |
| tctl = readl ( intel->regs + INTEL_TCTL ); |
| tctl &= ~( INTEL_TCTL_CT_MASK | INTEL_TCTL_COLD_MASK ); |
| tctl |= ( INTEL_TCTL_EN | INTEL_TCTL_PSP | INTEL_TCTL_CT_DEFAULT | |
| INTEL_TCTL_COLD_DEFAULT ); |
| writel ( tctl, intel->regs + INTEL_TCTL ); |
| |
| /* Enable receiver */ |
| rctl = readl ( intel->regs + INTEL_RCTL ); |
| rctl &= ~( INTEL_RCTL_BSIZE_BSEX_MASK ); |
| rctl |= ( INTEL_RCTL_EN | INTEL_RCTL_UPE | INTEL_RCTL_MPE | |
| INTEL_RCTL_BAM | INTEL_RCTL_BSIZE_2048 | INTEL_RCTL_SECRC ); |
| writel ( rctl, intel->regs + INTEL_RCTL ); |
| |
| /* Fill receive ring */ |
| intel_refill_rx ( intel ); |
| |
| /* Update link state */ |
| intel_check_link ( netdev ); |
| |
| /* Apply required errata */ |
| if ( intel->flags & INTEL_VMWARE ) { |
| DBGC ( intel, "INTEL %p applying VMware errata workaround\n", |
| intel ); |
| intel->force_icr = INTEL_IRQ_RXT0; |
| } |
| |
| return 0; |
| |
| intel_destroy_ring ( intel, &intel->rx ); |
| err_create_rx: |
| intel_destroy_ring ( intel, &intel->tx ); |
| err_create_tx: |
| return rc; |
| } |
| |
| /** |
| * Close network device |
| * |
| * @v netdev Network device |
| */ |
| static void intel_close ( struct net_device *netdev ) { |
| struct intel_nic *intel = netdev->priv; |
| |
| /* Disable receiver */ |
| writel ( 0, intel->regs + INTEL_RCTL ); |
| |
| /* Disable transmitter */ |
| writel ( 0, intel->regs + INTEL_TCTL ); |
| |
| /* Destroy receive descriptor ring */ |
| intel_destroy_ring ( intel, &intel->rx ); |
| |
| /* Discard any unused receive buffers */ |
| intel_empty_rx ( intel ); |
| |
| /* Destroy transmit descriptor ring */ |
| intel_destroy_ring ( intel, &intel->tx ); |
| |
| /* Reset the NIC, to flush the transmit and receive FIFOs */ |
| intel_reset ( intel ); |
| } |
| |
| /** |
| * Transmit packet |
| * |
| * @v netdev Network device |
| * @v iobuf I/O buffer |
| * @ret rc Return status code |
| */ |
| int intel_transmit ( struct net_device *netdev, struct io_buffer *iobuf ) { |
| struct intel_nic *intel = netdev->priv; |
| struct intel_descriptor *tx; |
| unsigned int tx_idx; |
| unsigned int tx_tail; |
| size_t len; |
| |
| /* Get next transmit descriptor */ |
| if ( ( intel->tx.prod - intel->tx.cons ) >= INTEL_TX_FILL ) { |
| DBGC ( intel, "INTEL %p out of transmit descriptors\n", intel ); |
| return -ENOBUFS; |
| } |
| tx_idx = ( intel->tx.prod++ % INTEL_NUM_TX_DESC ); |
| tx_tail = ( intel->tx.prod % INTEL_NUM_TX_DESC ); |
| tx = &intel->tx.desc[tx_idx]; |
| |
| /* Populate transmit descriptor */ |
| len = iob_len ( iobuf ); |
| intel->tx.describe ( tx, iob_dma ( iobuf ), len ); |
| wmb(); |
| |
| /* Notify card that there are packets ready to transmit */ |
| profile_start ( &intel_vm_tx_profiler ); |
| writel ( tx_tail, intel->regs + intel->tx.reg + INTEL_xDT ); |
| profile_stop ( &intel_vm_tx_profiler ); |
| profile_exclude ( &intel_vm_tx_profiler ); |
| |
| DBGC2 ( intel, "INTEL %p TX %d is [%lx,%lx)\n", |
| intel, tx_idx, virt_to_phys ( iobuf->data ), |
| ( virt_to_phys ( iobuf->data ) + len ) ); |
| |
| return 0; |
| } |
| |
| /** |
| * Poll for completed packets |
| * |
| * @v netdev Network device |
| */ |
| void intel_poll_tx ( struct net_device *netdev ) { |
| struct intel_nic *intel = netdev->priv; |
| struct intel_descriptor *tx; |
| unsigned int tx_idx; |
| |
| /* Check for completed packets */ |
| while ( intel->tx.cons != intel->tx.prod ) { |
| |
| /* Get next transmit descriptor */ |
| tx_idx = ( intel->tx.cons % INTEL_NUM_TX_DESC ); |
| tx = &intel->tx.desc[tx_idx]; |
| |
| /* Stop if descriptor is still in use */ |
| if ( ! ( tx->status & cpu_to_le32 ( INTEL_DESC_STATUS_DD ) ) ) |
| return; |
| |
| DBGC2 ( intel, "INTEL %p TX %d complete\n", intel, tx_idx ); |
| |
| /* Complete TX descriptor */ |
| netdev_tx_complete_next ( netdev ); |
| intel->tx.cons++; |
| } |
| } |
| |
| /** |
| * Poll for received packets |
| * |
| * @v netdev Network device |
| */ |
| void intel_poll_rx ( struct net_device *netdev ) { |
| struct intel_nic *intel = netdev->priv; |
| struct intel_descriptor *rx; |
| struct io_buffer *iobuf; |
| unsigned int rx_idx; |
| size_t len; |
| |
| /* Check for received packets */ |
| while ( intel->rx.cons != intel->rx.prod ) { |
| |
| /* Get next receive descriptor */ |
| rx_idx = ( intel->rx.cons % INTEL_NUM_RX_DESC ); |
| rx = &intel->rx.desc[rx_idx]; |
| |
| /* Stop if descriptor is still in use */ |
| if ( ! ( rx->status & cpu_to_le32 ( INTEL_DESC_STATUS_DD ) ) ) |
| return; |
| |
| /* Populate I/O buffer */ |
| iobuf = intel->rx_iobuf[rx_idx]; |
| intel->rx_iobuf[rx_idx] = NULL; |
| len = le16_to_cpu ( rx->length ); |
| iob_put ( iobuf, len ); |
| |
| /* Hand off to network stack */ |
| if ( rx->status & cpu_to_le32 ( INTEL_DESC_STATUS_RXE ) ) { |
| DBGC ( intel, "INTEL %p RX %d error (length %zd, " |
| "status %08x)\n", intel, rx_idx, len, |
| le32_to_cpu ( rx->status ) ); |
| netdev_rx_err ( netdev, iobuf, -EIO ); |
| } else { |
| DBGC2 ( intel, "INTEL %p RX %d complete (length %zd)\n", |
| intel, rx_idx, len ); |
| netdev_rx ( netdev, iobuf ); |
| } |
| intel->rx.cons++; |
| } |
| } |
| |
| /** |
| * Poll for completed and received packets |
| * |
| * @v netdev Network device |
| */ |
| static void intel_poll ( struct net_device *netdev ) { |
| struct intel_nic *intel = netdev->priv; |
| uint32_t icr; |
| |
| /* Check for and acknowledge interrupts */ |
| profile_start ( &intel_vm_poll_profiler ); |
| icr = readl ( intel->regs + INTEL_ICR ); |
| profile_stop ( &intel_vm_poll_profiler ); |
| profile_exclude ( &intel_vm_poll_profiler ); |
| icr |= intel->force_icr; |
| if ( ! icr ) |
| return; |
| |
| /* Poll for TX completions, if applicable */ |
| if ( icr & INTEL_IRQ_TXDW ) |
| intel_poll_tx ( netdev ); |
| |
| /* Poll for RX completions, if applicable */ |
| if ( icr & ( INTEL_IRQ_RXT0 | INTEL_IRQ_RXO ) ) |
| intel_poll_rx ( netdev ); |
| |
| /* Report receive overruns */ |
| if ( icr & INTEL_IRQ_RXO ) |
| netdev_rx_err ( netdev, NULL, -ENOBUFS ); |
| |
| /* Check link state, if applicable */ |
| if ( icr & INTEL_IRQ_LSC ) |
| intel_check_link ( netdev ); |
| |
| /* Check for unexpected interrupts */ |
| if ( icr & ~( INTEL_IRQ_TXDW | INTEL_IRQ_TXQE | INTEL_IRQ_LSC | |
| INTEL_IRQ_RXDMT0 | INTEL_IRQ_RXT0 | INTEL_IRQ_RXO ) ) { |
| DBGC ( intel, "INTEL %p unexpected ICR %08x\n", intel, icr ); |
| /* Report as a TX error */ |
| netdev_tx_err ( netdev, NULL, -ENOTSUP ); |
| } |
| |
| /* Refill RX ring */ |
| intel_refill_rx ( intel ); |
| } |
| |
| /** |
| * Enable or disable interrupts |
| * |
| * @v netdev Network device |
| * @v enable Interrupts should be enabled |
| */ |
| static void intel_irq ( struct net_device *netdev, int enable ) { |
| struct intel_nic *intel = netdev->priv; |
| uint32_t mask; |
| |
| mask = ( INTEL_IRQ_TXDW | INTEL_IRQ_LSC | INTEL_IRQ_RXT0 ); |
| if ( enable ) { |
| writel ( mask, intel->regs + INTEL_IMS ); |
| } else { |
| writel ( mask, intel->regs + INTEL_IMC ); |
| } |
| } |
| |
| /** Intel network device operations */ |
| static struct net_device_operations intel_operations = { |
| .open = intel_open, |
| .close = intel_close, |
| .transmit = intel_transmit, |
| .poll = intel_poll, |
| .irq = intel_irq, |
| }; |
| |
| /****************************************************************************** |
| * |
| * PCI interface |
| * |
| ****************************************************************************** |
| */ |
| |
| /** |
| * Probe PCI device |
| * |
| * @v pci PCI device |
| * @ret rc Return status code |
| */ |
| static int intel_probe ( struct pci_device *pci ) { |
| struct net_device *netdev; |
| struct intel_nic *intel; |
| int rc; |
| |
| /* Allocate and initialise net device */ |
| netdev = alloc_etherdev ( sizeof ( *intel ) ); |
| if ( ! netdev ) { |
| rc = -ENOMEM; |
| goto err_alloc; |
| } |
| netdev_init ( netdev, &intel_operations ); |
| intel = netdev->priv; |
| pci_set_drvdata ( pci, netdev ); |
| netdev->dev = &pci->dev; |
| memset ( intel, 0, sizeof ( *intel ) ); |
| intel->port = PCI_FUNC ( pci->busdevfn ); |
| intel->flags = pci->id->driver_data; |
| intel_init_ring ( &intel->tx, INTEL_NUM_TX_DESC, INTEL_TD, |
| intel_describe_tx ); |
| intel_init_ring ( &intel->rx, INTEL_NUM_RX_DESC, INTEL_RD, |
| intel_describe_rx ); |
| |
| /* Fix up PCI device */ |
| adjust_pci_device ( pci ); |
| |
| /* Map registers */ |
| intel->regs = pci_ioremap ( pci, pci->membase, INTEL_BAR_SIZE ); |
| if ( ! intel->regs ) { |
| rc = -ENODEV; |
| goto err_ioremap; |
| } |
| |
| /* Configure DMA */ |
| intel->dma = &pci->dma; |
| dma_set_mask_64bit ( intel->dma ); |
| netdev->dma = intel->dma; |
| |
| /* Reset the NIC */ |
| if ( ( rc = intel_reset ( intel ) ) != 0 ) |
| goto err_reset; |
| |
| /* Fetch MAC address */ |
| if ( ( rc = intel_fetch_mac ( intel, netdev->hw_addr ) ) != 0 ) |
| goto err_fetch_mac; |
| |
| /* Register network device */ |
| if ( ( rc = register_netdev ( netdev ) ) != 0 ) |
| goto err_register_netdev; |
| |
| /* Set initial link state */ |
| intel_check_link ( netdev ); |
| |
| return 0; |
| |
| unregister_netdev ( netdev ); |
| err_register_netdev: |
| err_fetch_mac: |
| intel_reset ( intel ); |
| err_reset: |
| iounmap ( intel->regs ); |
| err_ioremap: |
| netdev_nullify ( netdev ); |
| netdev_put ( netdev ); |
| err_alloc: |
| return rc; |
| } |
| |
| /** |
| * Remove PCI device |
| * |
| * @v pci PCI device |
| */ |
| static void intel_remove ( struct pci_device *pci ) { |
| struct net_device *netdev = pci_get_drvdata ( pci ); |
| struct intel_nic *intel = netdev->priv; |
| |
| /* Unregister network device */ |
| unregister_netdev ( netdev ); |
| |
| /* Reset the NIC */ |
| intel_reset ( intel ); |
| |
| /* Free network device */ |
| iounmap ( intel->regs ); |
| netdev_nullify ( netdev ); |
| netdev_put ( netdev ); |
| } |
| |
| /** Intel PCI device IDs */ |
| static struct pci_device_id intel_nics[] = { |
| PCI_ROM ( 0x8086, 0x0438, "dh8900cc", "DH8900CC", 0 ), |
| PCI_ROM ( 0x8086, 0x043a, "dh8900cc-f", "DH8900CC Fiber", 0 ), |
| PCI_ROM ( 0x8086, 0x043c, "dh8900cc-b", "DH8900CC Backplane", 0 ), |
| PCI_ROM ( 0x8086, 0x0440, "dh8900cc-s", "DH8900CC SFP", 0 ), |
| PCI_ROM ( 0x8086, 0x0d4c, "i219lm-11", "I219-LM (11)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x0d4d, "i219v-11", "I219-V (11)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x0d4e, "i219lm-10", "I219-LM (10)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x0d4f, "i219v-10", "I219-V (10)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x0d53, "i219lm-12", "I219-LM (12)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x0d55, "i219v-12", "I219-V (12)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x0dc5, "i219lm-23", "I219-LM (23)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1000, "82542-f", "82542 (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x1001, "82543gc-f", "82543GC (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x1004, "82543gc", "82543GC (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x1008, "82544ei", "82544EI (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x1009, "82544ei-f", "82544EI (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x100c, "82544gc", "82544GC (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x100d, "82544gc-l", "82544GC (LOM)", 0 ), |
| PCI_ROM ( 0x8086, 0x100e, "82540em", "82540EM", 0 ), |
| PCI_ROM ( 0x8086, 0x100f, "82545em", "82545EM (Copper)", INTEL_VMWARE ), |
| PCI_ROM ( 0x8086, 0x1010, "82546eb", "82546EB (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x1011, "82545em-f", "82545EM (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x1012, "82546eb-f", "82546EB (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x1013, "82541ei", "82541EI", 0 ), |
| PCI_ROM ( 0x8086, 0x1014, "82541er", "82541ER", 0 ), |
| PCI_ROM ( 0x8086, 0x1015, "82540em-l", "82540EM (LOM)", 0 ), |
| PCI_ROM ( 0x8086, 0x1016, "82540ep-m", "82540EP (Mobile)", 0 ), |
| PCI_ROM ( 0x8086, 0x1017, "82540ep", "82540EP", 0 ), |
| PCI_ROM ( 0x8086, 0x1018, "82541ei", "82541EI", 0 ), |
| PCI_ROM ( 0x8086, 0x1019, "82547ei", "82547EI", 0 ), |
| PCI_ROM ( 0x8086, 0x101a, "82547ei-m", "82547EI (Mobile)", 0 ), |
| PCI_ROM ( 0x8086, 0x101d, "82546eb", "82546EB", 0 ), |
| PCI_ROM ( 0x8086, 0x101e, "82540ep-m", "82540EP (Mobile)", 0 ), |
| PCI_ROM ( 0x8086, 0x1026, "82545gm", "82545GM", 0 ), |
| PCI_ROM ( 0x8086, 0x1027, "82545gm-1", "82545GM", 0 ), |
| PCI_ROM ( 0x8086, 0x1028, "82545gm-2", "82545GM", 0 ), |
| PCI_ROM ( 0x8086, 0x1049, "82566mm", "82566MM", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x104a, "82566dm", "82566DM", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x104b, "82566dc", "82566DC", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x104c, "82562v", "82562V", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x104d, "82566mc", "82566MC", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x105e, "82571eb", "82571EB", 0 ), |
| PCI_ROM ( 0x8086, 0x105f, "82571eb-1", "82571EB", 0 ), |
| PCI_ROM ( 0x8086, 0x1060, "82571eb-2", "82571EB", 0 ), |
| PCI_ROM ( 0x8086, 0x1075, "82547gi", "82547GI", 0 ), |
| PCI_ROM ( 0x8086, 0x1076, "82541gi", "82541GI", 0 ), |
| PCI_ROM ( 0x8086, 0x1077, "82541gi-1", "82541GI", 0 ), |
| PCI_ROM ( 0x8086, 0x1078, "82541er", "82541ER", 0 ), |
| PCI_ROM ( 0x8086, 0x1079, "82546gb", "82546GB", 0 ), |
| PCI_ROM ( 0x8086, 0x107a, "82546gb-1", "82546GB", 0 ), |
| PCI_ROM ( 0x8086, 0x107b, "82546gb-2", "82546GB", 0 ), |
| PCI_ROM ( 0x8086, 0x107c, "82541pi", "82541PI", 0 ), |
| PCI_ROM ( 0x8086, 0x107d, "82572ei", "82572EI (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x107e, "82572ei-f", "82572EI (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x107f, "82572ei", "82572EI", 0 ), |
| PCI_ROM ( 0x8086, 0x108a, "82546gb-3", "82546GB", 0 ), |
| PCI_ROM ( 0x8086, 0x108b, "82573v", "82573V (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x108c, "82573e", "82573E (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x1096, "80003es2lan", "80003ES2LAN (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x1098, "80003es2lan-s", "80003ES2LAN (Serdes)", 0 ), |
| PCI_ROM ( 0x8086, 0x1099, "82546gb-4", "82546GB (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x109a, "82573l", "82573L", 0 ), |
| PCI_ROM ( 0x8086, 0x10a4, "82571eb", "82571EB", 0 ), |
| PCI_ROM ( 0x8086, 0x10a5, "82571eb", "82571EB (Fiber)", 0 ), |
| PCI_ROM ( 0x8086, 0x10a7, "82575eb", "82575EB", 0 ), |
| PCI_ROM ( 0x8086, 0x10a9, "82575eb", "82575EB Backplane", 0 ), |
| PCI_ROM ( 0x8086, 0x10b5, "82546gb", "82546GB (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x10b9, "82572ei", "82572EI (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x10ba, "80003es2lan", "80003ES2LAN (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x10bb, "80003es2lan", "80003ES2LAN (Serdes)", 0 ), |
| PCI_ROM ( 0x8086, 0x10bc, "82571eb", "82571EB (Copper)", 0 ), |
| PCI_ROM ( 0x8086, 0x10bd, "82566dm-2", "82566DM-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10bf, "82567lf", "82567LF", 0 ), |
| PCI_ROM ( 0x8086, 0x10c0, "82562v-2", "82562V-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10c2, "82562g-2", "82562G-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10c3, "82562gt-2", "82562GT-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10c4, "82562gt", "82562GT", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x10c5, "82562g", "82562G", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x10c9, "82576", "82576", 0 ), |
| PCI_ROM ( 0x8086, 0x10cb, "82567v", "82567V", 0 ), |
| PCI_ROM ( 0x8086, 0x10cc, "82567lm-2", "82567LM-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10cd, "82567lf-2", "82567LF-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10ce, "82567v-2", "82567V-2", 0 ), |
| PCI_ROM ( 0x8086, 0x10d3, "82574l", "82574L", 0 ), |
| PCI_ROM ( 0x8086, 0x10d5, "82571pt", "82571PT PT Quad", 0 ), |
| PCI_ROM ( 0x8086, 0x10d6, "82575gb", "82575GB", 0 ), |
| PCI_ROM ( 0x8086, 0x10d9, "82571eb-d", "82571EB Dual Mezzanine", 0 ), |
| PCI_ROM ( 0x8086, 0x10da, "82571eb-q", "82571EB Quad Mezzanine", 0 ), |
| PCI_ROM ( 0x8086, 0x10de, "82567lm-3", "82567LM-3", 0 ), |
| PCI_ROM ( 0x8086, 0x10df, "82567lf-3", "82567LF-3", 0 ), |
| PCI_ROM ( 0x8086, 0x10e5, "82567lm-4", "82567LM-4", 0 ), |
| PCI_ROM ( 0x8086, 0x10e6, "82576", "82576", 0 ), |
| PCI_ROM ( 0x8086, 0x10e7, "82576-2", "82576", 0 ), |
| PCI_ROM ( 0x8086, 0x10e8, "82576-3", "82576", 0 ), |
| PCI_ROM ( 0x8086, 0x10ea, "82577lm", "82577LM", 0 ), |
| PCI_ROM ( 0x8086, 0x10eb, "82577lc", "82577LC", 0 ), |
| PCI_ROM ( 0x8086, 0x10ef, "82578dm", "82578DM", 0 ), |
| PCI_ROM ( 0x8086, 0x10f0, "82578dc", "82578DC", 0 ), |
| PCI_ROM ( 0x8086, 0x10f5, "82567lm", "82567LM", 0 ), |
| PCI_ROM ( 0x8086, 0x10f6, "82574l", "82574L", 0 ), |
| PCI_ROM ( 0x8086, 0x1501, "82567v-3", "82567V-3", INTEL_PBS_ERRATA ), |
| PCI_ROM ( 0x8086, 0x1502, "82579lm", "82579LM", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x1503, "82579v", "82579V", 0 ), |
| PCI_ROM ( 0x8086, 0x150a, "82576ns", "82576NS", 0 ), |
| PCI_ROM ( 0x8086, 0x150c, "82583v", "82583V", 0 ), |
| PCI_ROM ( 0x8086, 0x150d, "82576-4", "82576 Backplane", 0 ), |
| PCI_ROM ( 0x8086, 0x150e, "82580", "82580", 0 ), |
| PCI_ROM ( 0x8086, 0x150f, "82580-f", "82580 Fiber", 0 ), |
| PCI_ROM ( 0x8086, 0x1510, "82580-b", "82580 Backplane", 0 ), |
| PCI_ROM ( 0x8086, 0x1511, "82580-s", "82580 SFP", 0 ), |
| PCI_ROM ( 0x8086, 0x1516, "82580-2", "82580", 0 ), |
| PCI_ROM ( 0x8086, 0x1518, "82576ns", "82576NS SerDes", 0 ), |
| PCI_ROM ( 0x8086, 0x1521, "i350", "I350", 0 ), |
| PCI_ROM ( 0x8086, 0x1522, "i350-f", "I350 Fiber", 0 ), |
| PCI_ROM ( 0x8086, 0x1523, "i350-b", "I350 Backplane", INTEL_NO_ASDE ), |
| PCI_ROM ( 0x8086, 0x1524, "i350-2", "I350", 0 ), |
| PCI_ROM ( 0x8086, 0x1525, "82567v-4", "82567V-4", 0 ), |
| PCI_ROM ( 0x8086, 0x1526, "82576-5", "82576", 0 ), |
| PCI_ROM ( 0x8086, 0x1527, "82580-f2", "82580 Fiber", 0 ), |
| PCI_ROM ( 0x8086, 0x1533, "i210", "I210", INTEL_PBSIZE_RST ), |
| PCI_ROM ( 0x8086, 0x1539, "i211", "I211", 0 ), |
| PCI_ROM ( 0x8086, 0x153a, "i217lm", "I217-LM", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x153b, "i217v", "I217-V", 0 ), |
| PCI_ROM ( 0x8086, 0x1559, "i218v", "I218-V", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x155a, "i218lm", "I218-LM", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x156f, "i219lm", "I219-LM", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1570, "i219v", "I219-V", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x157b, "i210-2", "I210", INTEL_PBSIZE_RST ), |
| PCI_ROM ( 0x8086, 0x15a0, "i218lm-2", "I218-LM", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x15a1, "i218v-2", "I218-V", 0 ), |
| PCI_ROM ( 0x8086, 0x15a2, "i218lm-3", "I218-LM", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x15a3, "i218v-3", "I218-V", INTEL_NO_PHY_RST ), |
| PCI_ROM ( 0x8086, 0x15b7, "i219lm-2", "I219-LM (2)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15b8, "i219v-2", "I219-V (2)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15b9, "i219lm-3", "I219-LM (3)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15bb, "i219lm-7", "I219-LM (7)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15bc, "i219v-7", "I219-V (7)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15bd, "i219lm-6", "I219-LM (6)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15be, "i219v-6", "I219-V (6)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15d6, "i219v-5", "I219-V (5)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15d7, "i219lm-4", "I219-LM (4)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15d8, "i219v-4", "I219-V (4)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15df, "i219lm-8", "I219-LM (8)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15e0, "i219v-8", "I219-V (8)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15e1, "i219lm-9", "I219-LM (9)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15e2, "i219v-9", "I219-V (9)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15e3, "i219lm-5", "I219-LM (5)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15f4, "i219lm-15", "I219-LM (15)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15f5, "i219v-15", "I219-V (15)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15f9, "i219lm-14", "I219-LM (14)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15fa, "i219v-14", "I219-V (14)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15fb, "i219lm-13", "I219-LM (13)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x15fc, "i219v-13", "I219-V (13)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1a1c, "i219lm-17", "I219-LM (17)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1a1d, "i219v-17", "I219-V (17)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1a1e, "i219lm-16", "I219-LM (16)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1a1f, "i219v-16", "I219-V (16)", INTEL_I219 ), |
| PCI_ROM ( 0x8086, 0x1f41, "i354", "I354", INTEL_NO_ASDE ), |
| PCI_ROM ( 0x8086, 0x294c, "82566dc-2", "82566DC-2", 0 ), |
| PCI_ROM ( 0x8086, 0x2e6e, "cemedia", "CE Media Processor", 0 ), |
| }; |
| |
| /** Intel PCI driver */ |
| struct pci_driver intel_driver __pci_driver = { |
| .ids = intel_nics, |
| .id_count = ( sizeof ( intel_nics ) / sizeof ( intel_nics[0] ) ), |
| .probe = intel_probe, |
| .remove = intel_remove, |
| }; |