| /*++ | |
| Copyright (c) 2005, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| Module Name: | |
| PcatPciRootBridgeIo.c | |
| Abstract: | |
| EFI PC AT PCI Root Bridge Io Protocol | |
| Revision History | |
| --*/ | |
| #include "PcatPciRootBridge.h" | |
| #include "pci22.h" | |
| #include "SalProc.h" | |
| #include EFI_GUID_DEFINITION (SalSystemTable) | |
| // | |
| // Might be good to put this in an include file, but people may start | |
| // using it! They should always access the EFI abstraction that is | |
| // contained in this file. Just a little information hiding. | |
| // | |
| #define PORT_TO_MEM(_Port) ( ((_Port) & 0xffffffffffff0000) | (((_Port) & 0xfffc) << 10) | ((_Port) & 0x0fff) ) | |
| // | |
| // Macro's with casts make this much easier to use and read. | |
| // | |
| #define PORT_TO_MEM8(_Port) (*(UINT8 *)(PORT_TO_MEM(_Port))) | |
| #define PORT_TO_MEM16(_Port) (*(UINT16 *)(PORT_TO_MEM(_Port))) | |
| #define PORT_TO_MEM32(_Port) (*(UINT32 *)(PORT_TO_MEM(_Port))) | |
| #define EFI_PCI_ADDRESS_IA64(_seg, _bus,_dev,_func,_reg) \ | |
| ( (UINT64) ( (((UINTN)_seg) << 24) + (((UINTN)_bus) << 16) + (((UINTN)_dev) << 11) + (((UINTN)_func) << 8) + ((UINTN)_reg)) ) | |
| // | |
| // Local variables for performing SAL Proc calls | |
| // | |
| PLABEL mSalProcPlabel; | |
| CALL_SAL_PROC mGlobalSalProc; | |
| EFI_STATUS | |
| PcatRootBridgeIoIoRead ( | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, | |
| IN UINT64 UserAddress, | |
| IN UINTN Count, | |
| IN OUT VOID *UserBuffer | |
| ) | |
| { | |
| PCAT_PCI_ROOT_BRIDGE_INSTANCE *PrivateData; | |
| UINTN InStride; | |
| UINTN OutStride; | |
| UINTN AlignMask; | |
| UINTN Address; | |
| PTR Buffer; | |
| UINT16 Data16; | |
| UINT32 Data32; | |
| if ( UserBuffer == NULL ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); | |
| Address = (UINTN) UserAddress; | |
| Buffer.buf = (UINT8 *)UserBuffer; | |
| if ( Address < PrivateData->IoBase || Address > PrivateData->IoLimit ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (Width < 0 || Width >= EfiPciWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Width & 0x03) == EfiPciWidthUint64) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| AlignMask = (1 << (Width & 0x03)) - 1; | |
| if ( Address & AlignMask ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| InStride = 1 << (Width & 0x03); | |
| OutStride = InStride; | |
| if (Width >=EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { | |
| InStride = 0; | |
| } | |
| if (Width >=EfiPciWidthFillUint8 && Width <= EfiPciWidthFillUint64) { | |
| OutStride = 0; | |
| } | |
| Width = Width & 0x03; | |
| Address += PrivateData->PhysicalIoBase; | |
| // | |
| // Loop for each iteration and move the data | |
| // | |
| switch (Width) { | |
| case EfiPciWidthUint8: | |
| for (; Count > 0; Count--, Buffer.buf += OutStride, Address += InStride) { | |
| MEMORY_FENCE(); | |
| *Buffer.ui8 = PORT_TO_MEM8(Address); | |
| MEMORY_FENCE(); | |
| } | |
| break; | |
| case EfiPciWidthUint16: | |
| for (; Count > 0; Count--, Buffer.buf += OutStride, Address += InStride) { | |
| MEMORY_FENCE(); | |
| if (Buffer.ui & 0x1) { | |
| Data16 = PORT_TO_MEM16(Address); | |
| *Buffer.ui8 = (UINT8)(Data16 & 0xff); | |
| *(Buffer.ui8+1) = (UINT8)((Data16 >> 8) & 0xff); | |
| } else { | |
| *Buffer.ui16 = PORT_TO_MEM16(Address); | |
| } | |
| MEMORY_FENCE(); | |
| } | |
| break; | |
| case EfiPciWidthUint32: | |
| for (; Count > 0; Count--, Buffer.buf += OutStride, Address += InStride) { | |
| MEMORY_FENCE(); | |
| if (Buffer.ui & 0x3) { | |
| Data32 = PORT_TO_MEM32(Address); | |
| *Buffer.ui8 = (UINT8)(Data32 & 0xff); | |
| *(Buffer.ui8+1) = (UINT8)((Data32 >> 8) & 0xff); | |
| *(Buffer.ui8+2) = (UINT8)((Data32 >> 16) & 0xff); | |
| *(Buffer.ui8+3) = (UINT8)((Data32 >> 24) & 0xff); | |
| } else { | |
| *Buffer.ui32 = PORT_TO_MEM32(Address); | |
| } | |
| MEMORY_FENCE(); | |
| } | |
| break; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PcatRootBridgeIoIoWrite ( | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, | |
| IN UINT64 UserAddress, | |
| IN UINTN Count, | |
| IN OUT VOID *UserBuffer | |
| ) | |
| { | |
| PCAT_PCI_ROOT_BRIDGE_INSTANCE *PrivateData; | |
| UINTN InStride; | |
| UINTN OutStride; | |
| UINTN AlignMask; | |
| UINTN Address; | |
| PTR Buffer; | |
| UINT16 Data16; | |
| UINT32 Data32; | |
| if ( UserBuffer == NULL ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); | |
| Address = (UINTN) UserAddress; | |
| Buffer.buf = (UINT8 *)UserBuffer; | |
| if ( Address < PrivateData->IoBase || Address > PrivateData->IoLimit ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (Width < 0 || Width >= EfiPciWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Width & 0x03) == EfiPciWidthUint64) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| AlignMask = (1 << (Width & 0x03)) - 1; | |
| if ( Address & AlignMask ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| InStride = 1 << (Width & 0x03); | |
| OutStride = InStride; | |
| if (Width >=EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { | |
| InStride = 0; | |
| } | |
| if (Width >=EfiPciWidthFillUint8 && Width <= EfiPciWidthFillUint64) { | |
| OutStride = 0; | |
| } | |
| Width = Width & 0x03; | |
| Address += PrivateData->PhysicalIoBase; | |
| // | |
| // Loop for each iteration and move the data | |
| // | |
| switch (Width) { | |
| case EfiPciWidthUint8: | |
| for (; Count > 0; Count--, Buffer.buf += OutStride, Address += InStride) { | |
| MEMORY_FENCE(); | |
| PORT_TO_MEM8(Address) = *Buffer.ui8; | |
| MEMORY_FENCE(); | |
| } | |
| break; | |
| case EfiPciWidthUint16: | |
| for (; Count > 0; Count--, Buffer.buf += OutStride, Address += InStride) { | |
| MEMORY_FENCE(); | |
| if (Buffer.ui & 0x1) { | |
| Data16 = *Buffer.ui8; | |
| Data16 = Data16 | (*(Buffer.ui8+1) << 8); | |
| PORT_TO_MEM16(Address) = Data16; | |
| } else { | |
| PORT_TO_MEM16(Address) = *Buffer.ui16; | |
| } | |
| MEMORY_FENCE(); | |
| } | |
| break; | |
| case EfiPciWidthUint32: | |
| for (; Count > 0; Count--, Buffer.buf += OutStride, Address += InStride) { | |
| MEMORY_FENCE(); | |
| if (Buffer.ui & 0x3) { | |
| Data32 = *Buffer.ui8; | |
| Data32 = Data32 | (*(Buffer.ui8+1) << 8); | |
| Data32 = Data32 | (*(Buffer.ui8+2) << 16); | |
| Data32 = Data32 | (*(Buffer.ui8+3) << 24); | |
| PORT_TO_MEM32(Address) = Data32; | |
| } else { | |
| PORT_TO_MEM32(Address) = *Buffer.ui32; | |
| } | |
| MEMORY_FENCE(); | |
| } | |
| break; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PcatRootBridgeIoGetIoPortMapping ( | |
| OUT EFI_PHYSICAL_ADDRESS *IoPortMapping, | |
| OUT EFI_PHYSICAL_ADDRESS *MemoryPortMapping | |
| ) | |
| /*++ | |
| Get the IO Port Map from the SAL System Table. | |
| --*/ | |
| { | |
| SAL_SYSTEM_TABLE_ASCENDING_ORDER *SalSystemTable; | |
| SAL_ST_MEMORY_DESCRIPTOR_ENTRY *SalMemDesc; | |
| EFI_STATUS Status; | |
| // | |
| // On all Itanium architectures, bit 63 is the I/O bit for performming Memory Mapped I/O operations | |
| // | |
| *MemoryPortMapping = 0x8000000000000000; | |
| Status = EfiLibGetSystemConfigurationTable(&gEfiSalSystemTableGuid, &SalSystemTable); | |
| if (EFI_ERROR(Status)) { | |
| return EFI_NOT_FOUND; | |
| } | |
| // | |
| // BugBug: Add code to test checksum on the Sal System Table | |
| // | |
| if (SalSystemTable->Entry0.Type != 0) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| mSalProcPlabel.ProcEntryPoint = SalSystemTable->Entry0.SalProcEntry; | |
| mSalProcPlabel.GP = SalSystemTable->Entry0.GlobalDataPointer; | |
| mGlobalSalProc = (CALL_SAL_PROC)&mSalProcPlabel.ProcEntryPoint; | |
| // | |
| // The SalSystemTable pointer includes the Type 0 entry. | |
| // The SalMemDesc is Type 1 so it comes next. | |
| // | |
| SalMemDesc = (SAL_ST_MEMORY_DESCRIPTOR_ENTRY *)(SalSystemTable + 1); | |
| while (SalMemDesc->Type == SAL_ST_MEMORY_DESCRIPTOR) { | |
| if (SalMemDesc->MemoryType == SAL_IO_PORT_MAPPING) { | |
| *IoPortMapping = SalMemDesc->PhysicalMemoryAddress; | |
| *IoPortMapping |= 0x8000000000000000; | |
| return EFI_SUCCESS; | |
| } | |
| SalMemDesc++; | |
| } | |
| return EFI_UNSUPPORTED; | |
| } | |
| EFI_STATUS | |
| PcatRootBridgeIoPciRW ( | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, | |
| IN BOOLEAN Write, | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, | |
| IN UINT64 UserAddress, | |
| IN UINTN Count, | |
| IN OUT UINT8 *UserBuffer | |
| ) | |
| { | |
| PCAT_PCI_ROOT_BRIDGE_INSTANCE *PrivateData; | |
| UINTN AlignMask; | |
| UINTN InStride; | |
| UINTN OutStride; | |
| UINT64 Address; | |
| DEFIO_PCI_ADDR *Defio; | |
| PTR Buffer; | |
| UINT32 Data32; | |
| UINT16 Data16; | |
| rArg Return; | |
| if (Width < 0 || Width >= EfiPciWidthMaximum) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Width & 0x03) == EfiPciWidthUint64) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| AlignMask = (1 << (Width & 0x03)) - 1; | |
| if ( UserAddress & AlignMask ) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| InStride = 1 << (Width & 0x03); | |
| OutStride = InStride; | |
| if (Width >=EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { | |
| InStride = 0; | |
| } | |
| if (Width >=EfiPciWidthFillUint8 && Width <= EfiPciWidthFillUint64) { | |
| OutStride = 0; | |
| } | |
| Width = Width & 0x03; | |
| Defio = (DEFIO_PCI_ADDR *)&UserAddress; | |
| if ((Defio->Function > PCI_MAX_FUNC) || (Defio->Device > PCI_MAX_DEVICE)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Buffer.buf = (UINT8 *)UserBuffer; | |
| PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); | |
| Address = EFI_PCI_ADDRESS_IA64( | |
| This->SegmentNumber, | |
| Defio->Bus, | |
| Defio->Device, | |
| Defio->Function, | |
| Defio->Register | |
| ); | |
| // | |
| // PCI Config access are all 32-bit alligned, but by accessing the | |
| // CONFIG_DATA_REGISTER (0xcfc) with different widths more cycle types | |
| // are possible on PCI. | |
| // | |
| // SalProc takes care of reading the proper register depending on stride | |
| // | |
| EfiAcquireLock(&PrivateData->PciLock); | |
| while (Count) { | |
| if(Write) { | |
| if (Buffer.ui & 0x3) { | |
| Data32 = (*(Buffer.ui8+0) << 0); | |
| Data32 |= (*(Buffer.ui8+1) << 8); | |
| Data32 |= (*(Buffer.ui8+2) << 16); | |
| Data32 |= (*(Buffer.ui8+3) << 24); | |
| } else { | |
| Data32 = *Buffer.ui32; | |
| } | |
| Return.p0 = -3; | |
| Return = mGlobalSalProc((UINT64) SAL_PCI_CONFIG_WRITE, | |
| Address, 1 << Width, Data32, 0, 0, 0, 0); | |
| if(Return.p0) { | |
| EfiReleaseLock(&PrivateData->PciLock); | |
| return EFI_UNSUPPORTED; | |
| } | |
| } else { | |
| Return.p0 = -3; | |
| Return = mGlobalSalProc((UINT64) SAL_PCI_CONFIG_READ, | |
| Address, 1 << Width, 0, 0, 0, 0, 0); | |
| if(Return.p0) { | |
| EfiReleaseLock(&PrivateData->PciLock); | |
| return EFI_UNSUPPORTED; | |
| } | |
| switch (Width) { | |
| case EfiPciWidthUint8: | |
| *Buffer.ui8 = (UINT8)Return.p1; | |
| break; | |
| case EfiPciWidthUint16: | |
| if (Buffer.ui & 0x1) { | |
| Data16 = (UINT16)Return.p1; | |
| *(Buffer.ui8 + 0) = Data16 & 0xff; | |
| *(Buffer.ui8 + 1) = (Data16 >> 8) & 0xff; | |
| } else { | |
| *Buffer.ui16 = (UINT16)Return.p1; | |
| } | |
| break; | |
| case EfiPciWidthUint32: | |
| if (Buffer.ui & 0x3) { | |
| Data32 = (UINT32)Return.p1; | |
| *(Buffer.ui8 + 0) = (UINT8)(Data32 & 0xff); | |
| *(Buffer.ui8 + 1) = (UINT8)((Data32 >> 8) & 0xff); | |
| *(Buffer.ui8 + 2) = (UINT8)((Data32 >> 16) & 0xff); | |
| *(Buffer.ui8 + 3) = (UINT8)((Data32 >> 24) & 0xff); | |
| } else { | |
| *Buffer.ui32 = (UINT32)Return.p1; | |
| } | |
| break; | |
| } | |
| } | |
| Address += InStride; | |
| Buffer.buf += OutStride; | |
| Count -= 1; | |
| } | |
| EfiReleaseLock(&PrivateData->PciLock); | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| ScanPciRootBridgeForRoms( | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *IoDev | |
| ) | |
| { | |
| return EFI_UNSUPPORTED; | |
| } |