blob: 8ae130860f7931f771492f4bad670652d5cdad96 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/**
* ti_usb_phy.c - USB3 and USB3 PHY programming for dwc3
*
* Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
*
* Author: Kishon Vijay Abraham I <kishon@ti.com>
*
* Taken from Linux Kernel v3.16 (drivers/phy/phy-ti-pipe3.c and
* drivers/phy/phy-omap-usb2.c) and ported to uboot.
*
* "commit 56042e : phy: ti-pipe3: Fix suspend/resume and module reload" for
* phy-ti-pipe3.c
*
* "commit eb82a3 : phy: omap-usb2: Balance pm_runtime_enable() on probe failure
* and remove" for phy-omap-usb2.c
*/
#include <common.h>
#include <malloc.h>
#include <ti-usb-phy-uboot.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <dm.h>
#include "linux-compat.h"
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
#define PLL_CONFIGURATION1 0x0000000C
#define PLL_CONFIGURATION2 0x00000010
#define PLL_CONFIGURATION3 0x00000014
#define PLL_CONFIGURATION4 0x00000020
#define PLL_REGM_MASK 0x001FFE00
#define PLL_REGM_SHIFT 0x9
#define PLL_REGM_F_MASK 0x0003FFFF
#define PLL_REGM_F_SHIFT 0x0
#define PLL_REGN_MASK 0x000001FE
#define PLL_REGN_SHIFT 0x1
#define PLL_SELFREQDCO_MASK 0x0000000E
#define PLL_SELFREQDCO_SHIFT 0x1
#define PLL_SD_MASK 0x0003FC00
#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_LDOPWDN BIT(15)
#define PLL_TICOPWDN BIT(16)
#define PLL_LOCK 0x2
#define PLL_IDLE 0x1
#define OMAP_CTRL_DEV_PHY_PD BIT(0)
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
#define OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
#define AM437X_CTRL_USB2_PHY_PD BIT(0)
#define AM437X_CTRL_USB2_OTG_PD BIT(1)
#define AM437X_CTRL_USB2_OTGVDET_EN BIT(19)
#define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20)
static LIST_HEAD(ti_usb_phy_list);
typedef unsigned int u32;
struct usb3_dpll_params {
u16 m;
u8 n;
u8 freq:3;
u8 sd;
u32 mf;
};
struct usb3_dpll_map {
unsigned long rate;
struct usb3_dpll_params params;
struct usb3_dpll_map *dpll_map;
};
struct ti_usb_phy {
void __iomem *pll_ctrl_base;
void __iomem *usb2_phy_power;
void __iomem *usb3_phy_power;
struct usb3_dpll_map *dpll_map;
struct list_head list;
int index;
};
static struct usb3_dpll_map dpll_map_usb[] = {
{12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
{16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
{19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
{20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
{26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
{38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
{ }, /* Terminator */
};
static inline unsigned int ti_usb3_readl(void __iomem *base, u32 offset)
{
return readl(base + offset);
}
static inline void ti_usb3_writel(void __iomem *base, u32 offset, u32 value)
{
writel(value, base + offset);
}
#ifndef CONFIG_AM43XX
static struct usb3_dpll_params *ti_usb3_get_dpll_params(struct ti_usb_phy *phy)
{
unsigned long rate;
struct usb3_dpll_map *dpll_map = phy->dpll_map;
rate = get_sys_clk_freq();
for (; dpll_map->rate; dpll_map++) {
if (rate == dpll_map->rate)
return &dpll_map->params;
}
log_err("No DPLL configuration for %lu Hz SYS CLK\n", rate);
return NULL;
}
static int ti_usb3_dpll_wait_lock(struct ti_usb_phy *phy)
{
u32 val;
do {
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_STATUS);
if (val & PLL_LOCK)
break;
} while (1);
return 0;
}
static int ti_usb3_dpll_program(struct ti_usb_phy *phy)
{
u32 val;
struct usb3_dpll_params *dpll_params;
if (!phy->pll_ctrl_base)
return -EINVAL;
dpll_params = ti_usb3_get_dpll_params(phy);
if (!dpll_params)
return -EINVAL;
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGN_MASK;
val |= dpll_params->n << PLL_REGN_SHIFT;
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
val &= ~PLL_SELFREQDCO_MASK;
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
val &= ~PLL_REGM_MASK;
val |= dpll_params->m << PLL_REGM_SHIFT;
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
val &= ~PLL_REGM_F_MASK;
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
val = ti_usb3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
val &= ~PLL_SD_MASK;
val |= dpll_params->sd << PLL_SD_SHIFT;
ti_usb3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
ti_usb3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
return ti_usb3_dpll_wait_lock(phy);
}
#endif
void ti_usb2_phy_power(struct ti_usb_phy *phy, int on)
{
u32 val;
val = readl(phy->usb2_phy_power);
if (on) {
#if defined(CONFIG_DRA7XX)
if (phy->index == 1)
val &= ~OMAP_CTRL_USB2_PHY_PD;
else
val &= ~OMAP_CTRL_DEV_PHY_PD;
#elif defined(CONFIG_AM43XX)
val &= ~(AM437X_CTRL_USB2_PHY_PD |
AM437X_CTRL_USB2_OTG_PD);
val |= (AM437X_CTRL_USB2_OTGVDET_EN |
AM437X_CTRL_USB2_OTGSESSEND_EN);
#endif
} else {
#if defined(CONFIG_DRA7XX)
if (phy->index == 1)
val |= OMAP_CTRL_USB2_PHY_PD;
else
val |= OMAP_CTRL_DEV_PHY_PD;
#elif defined(CONFIG_AM43XX)
val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
AM437X_CTRL_USB2_OTGSESSEND_EN);
val |= (AM437X_CTRL_USB2_PHY_PD |
AM437X_CTRL_USB2_OTG_PD);
#endif
}
writel(val, phy->usb2_phy_power);
}
#ifndef CONFIG_AM43XX
void ti_usb3_phy_power(struct ti_usb_phy *phy, int on)
{
u32 val;
u32 rate;
rate = get_sys_clk_freq();
rate = rate/1000000;
if (!phy->usb3_phy_power)
return;
val = readl(phy->usb3_phy_power);
if (on) {
val &= ~(OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK |
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_MASK);
val |= (OMAP_CTRL_USB3_PHY_TX_RX_POWERON) <<
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
val |= rate <<
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_FREQ_SHIFT;
} else {
val &= ~OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_MASK;
val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
OMAP_CTRL_USB3_PHY_PWRCTL_CLK_CMD_SHIFT;
}
writel(val, phy->usb3_phy_power);
}
#endif
/**
* ti_usb_phy_uboot_init - usb phy uboot initialization code
* @dev: struct ti_usb_phy_device containing initialization data
*
* Entry point for ti usb phy driver. This driver handles initialization
* of both usb2 phy and usb3 phy. Pointer to ti_usb_phy_device should be
* passed containing base address and other initialization data.
* Returns '0' on success and a negative value on failure.
*
* Generally called from board_usb_init() implemented in board file.
*/
int ti_usb_phy_uboot_init(struct ti_usb_phy_device *dev)
{
struct ti_usb_phy *phy;
phy = devm_kzalloc(NULL, sizeof(*phy), GFP_KERNEL);
if (!phy) {
log_err("unable to alloc mem for TI USB3 PHY\n");
return -ENOMEM;
}
phy->dpll_map = dpll_map_usb;
phy->index = dev->index;
phy->pll_ctrl_base = dev->pll_ctrl_base;
phy->usb2_phy_power = dev->usb2_phy_power;
phy->usb3_phy_power = dev->usb3_phy_power;
#ifndef CONFIG_AM43XX
ti_usb3_dpll_program(phy);
ti_usb3_phy_power(phy, 1);
#endif
ti_usb2_phy_power(phy, 1);
mdelay(150);
list_add_tail(&phy->list, &ti_usb_phy_list);
return 0;
}
/**
* ti_usb_phy_uboot_exit - usb phy uboot cleanup code
* @index: index of this controller
*
* Performs cleanup of memory allocated in ti_usb_phy_uboot_init.
* index of _this_ controller should be passed and should match with
* the index passed in ti_usb_phy_device during init.
*
* Generally called from board file.
*/
void ti_usb_phy_uboot_exit(int index)
{
struct ti_usb_phy *phy = NULL;
list_for_each_entry(phy, &ti_usb_phy_list, list) {
if (phy->index != index)
continue;
ti_usb2_phy_power(phy, 0);
#ifndef CONFIG_AM43XX
ti_usb3_phy_power(phy, 0);
#endif
list_del(&phy->list);
kfree(phy);
break;
}
}