blob: dc772b5ff9e34a5e80df503df9f49270e73a147f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018, Bin Meng <bmeng.cn@gmail.com>
*
* Generic reset driver for x86 processor
*/
#include <common.h>
#include <dm.h>
#include <efi_loader.h>
#include <pch.h>
#include <sysreset.h>
#include <acpi/acpi_s3.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/sysreset.h>
/*
* Power down the machine by using the power management sleep control
* of the chipset. This will currently only work on Intel chipsets.
* However, adapting it to new chipsets is fairly simple. You will
* have to find the IO address of the power management register block
* in your southbridge, and look up the appropriate SLP_TYP_S5 value
* from your southbridge's data sheet.
*
* This function never returns.
*/
int pch_sysreset_power_off(struct udevice *dev)
{
struct x86_sysreset_plat *plat = dev_get_plat(dev);
struct pch_pmbase_info pm;
u32 reg32;
int ret;
if (!plat->pch)
return -ENOENT;
ret = pch_ioctl(plat->pch, PCH_REQ_PMBASE_INFO, &pm, sizeof(pm));
if (ret)
return ret;
/*
* Mask interrupts or system might stay in a coma, not executing code
* anymore, but not powered off either.
*/
asm("cli");
/*
* Avoid any GPI waking the system from S5* or the system might stay in
* a coma
*/
outl(0x00000000, pm.base + pm.gpio0_en_ofs);
/* Clear Power Button Status */
outw(PWRBTN_STS, pm.base + pm.pm1_sts_ofs);
/* PMBASE + 4, Bit 10-12, Sleeping Type, * set to 111 -> S5, soft_off */
reg32 = inl(pm.base + pm.pm1_cnt_ofs);
/* Set Sleeping Type to S5 (poweroff) */
reg32 &= ~(SLP_EN | SLP_TYP);
reg32 |= SLP_TYP_S5;
outl(reg32, pm.base + pm.pm1_cnt_ofs);
/* Now set the Sleep Enable bit */
reg32 |= SLP_EN;
outl(reg32, pm.base + pm.pm1_cnt_ofs);
for (;;)
asm("hlt");
}
static int x86_sysreset_request(struct udevice *dev, enum sysreset_t type)
{
int value;
int ret;
switch (type) {
case SYSRESET_WARM:
value = SYS_RST | RST_CPU;
break;
case SYSRESET_COLD:
value = SYS_RST | RST_CPU | FULL_RST;
break;
case SYSRESET_POWER_OFF:
ret = pch_sysreset_power_off(dev);
if (ret)
return ret;
return -EINPROGRESS;
default:
return -EPROTONOSUPPORT;
}
outb(value, IO_PORT_RESET);
return -EINPROGRESS;
}
static int x86_sysreset_get_last(struct udevice *dev)
{
return SYSRESET_POWER;
}
#ifdef CONFIG_EFI_LOADER
void __efi_runtime EFIAPI efi_reset_system(
enum efi_reset_type reset_type,
efi_status_t reset_status,
unsigned long data_size, void *reset_data)
{
int value;
/*
* inline this code since we are not caused in the context of a
* udevice and passing NULL to x86_sysreset_request() is too horrible.
*/
if (reset_type == EFI_RESET_COLD ||
reset_type == EFI_RESET_PLATFORM_SPECIFIC)
value = SYS_RST | RST_CPU | FULL_RST;
else /* assume EFI_RESET_WARM since we cannot return an error */
value = SYS_RST | RST_CPU;
outb(value, IO_PORT_RESET);
/* TODO EFI_RESET_SHUTDOWN */
while (1) { }
}
#endif
static int x86_sysreset_probe(struct udevice *dev)
{
struct x86_sysreset_plat *plat = dev_get_plat(dev);
/*
* Locate the PCH if there is one. It isn't essential. Avoid this before
* relocation as we shouldn't need reset then and it needs a lot of
* memory for PCI enumeration.
*/
if (gd->flags & GD_FLG_RELOC)
uclass_first_device(UCLASS_PCH, &plat->pch);
return 0;
}
static const struct udevice_id x86_sysreset_ids[] = {
{ .compatible = "x86,reset" },
{ }
};
static struct sysreset_ops x86_sysreset_ops = {
.request = x86_sysreset_request,
.get_last = x86_sysreset_get_last,
};
U_BOOT_DRIVER(x86_reset) = {
.name = "x86_reset",
.id = UCLASS_SYSRESET,
.of_match = x86_sysreset_ids,
.ops = &x86_sysreset_ops,
.probe = x86_sysreset_probe,
.plat_auto = sizeof(struct x86_sysreset_plat),
};