blob: 5fe8a70abca7891d089ab212f05c1ffdea1c4ba5 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Qualcomm SPMI bus driver
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
*
* Loosely based on Little Kernel driver
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <spmi/spmi.h>
DECLARE_GLOBAL_DATA_PTR;
/* PMIC Arbiter configuration registers */
#define PMIC_ARB_VERSION 0x0000
#define PMIC_ARB_VERSION_V2_MIN 0x20010000
#define PMIC_ARB_VERSION_V3_MIN 0x30000000
#define PMIC_ARB_VERSION_V5_MIN 0x50000000
#define APID_MAP_OFFSET_V1_V2_V3 (0x800)
#define APID_MAP_OFFSET_V5 (0x900)
#define ARB_CHANNEL_OFFSET(n) (0x4 * (n))
#define SPMI_CH_OFFSET(chnl) ((chnl) * 0x8000)
#define SPMI_V5_OBS_CH_OFFSET(chnl) ((chnl) * 0x80)
#define SPMI_V5_RW_CH_OFFSET(chnl) ((chnl) * 0x10000)
#define SPMI_REG_CMD0 0x0
#define SPMI_REG_CONFIG 0x4
#define SPMI_REG_STATUS 0x8
#define SPMI_REG_WDATA 0x10
#define SPMI_REG_RDATA 0x18
#define SPMI_CMD_OPCODE_SHIFT 27
#define SPMI_CMD_SLAVE_ID_SHIFT 20
#define SPMI_CMD_ADDR_SHIFT 12
#define SPMI_CMD_ADDR_OFFSET_SHIFT 4
#define SPMI_CMD_BYTE_CNT_SHIFT 0
#define SPMI_CMD_EXT_REG_WRITE_LONG 0x00
#define SPMI_CMD_EXT_REG_READ_LONG 0x01
#define SPMI_STATUS_DONE 0x1
#define SPMI_MAX_CHANNELS 128
#define SPMI_MAX_SLAVES 16
#define SPMI_MAX_PERIPH 256
enum arb_ver {
V1 = 1,
V2,
V3,
V5 = 5
};
/*
* PMIC arbiter version 5 uses different register offsets for read/write vs
* observer channels.
*/
enum pmic_arb_channel {
PMIC_ARB_CHANNEL_RW,
PMIC_ARB_CHANNEL_OBS,
};
struct msm_spmi_priv {
phys_addr_t arb_chnl; /* ARB channel mapping base */
phys_addr_t spmi_chnls; /* SPMI channels */
phys_addr_t spmi_obs; /* SPMI observer */
/* SPMI channel map */
uint8_t channel_map[SPMI_MAX_SLAVES][SPMI_MAX_PERIPH];
/* SPMI bus arbiter version */
u32 arb_ver;
};
static int msm_spmi_write(struct udevice *dev, int usid, int pid, int off,
uint8_t val)
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
unsigned channel;
unsigned int ch_offset;
uint32_t reg = 0;
if (usid >= SPMI_MAX_SLAVES)
return -EIO;
if (pid >= SPMI_MAX_PERIPH)
return -EIO;
channel = priv->channel_map[usid][pid];
/* Disable IRQ mode for the current channel*/
writel(0x0,
priv->spmi_chnls + SPMI_CH_OFFSET(channel) + SPMI_REG_CONFIG);
/* Write single byte */
writel(val, priv->spmi_chnls + SPMI_CH_OFFSET(channel) + SPMI_REG_WDATA);
/* Prepare write command */
reg |= SPMI_CMD_EXT_REG_WRITE_LONG << SPMI_CMD_OPCODE_SHIFT;
reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
reg |= (pid << SPMI_CMD_ADDR_SHIFT);
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
reg |= 1; /* byte count */
if (priv->arb_ver == V5)
ch_offset = SPMI_V5_RW_CH_OFFSET(channel);
else
ch_offset = SPMI_CH_OFFSET(channel);
/* Send write command */
writel(reg, priv->spmi_chnls + SPMI_CH_OFFSET(channel) + SPMI_REG_CMD0);
/* Wait till CMD DONE status */
reg = 0;
while (!reg) {
reg = readl(priv->spmi_chnls + SPMI_CH_OFFSET(channel) +
SPMI_REG_STATUS);
}
if (reg ^ SPMI_STATUS_DONE) {
printf("SPMI write failure.\n");
return -EIO;
}
return 0;
}
static int msm_spmi_read(struct udevice *dev, int usid, int pid, int off)
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
unsigned channel;
unsigned int ch_offset;
uint32_t reg = 0;
if (usid >= SPMI_MAX_SLAVES)
return -EIO;
if (pid >= SPMI_MAX_PERIPH)
return -EIO;
channel = priv->channel_map[usid][pid];
if (priv->arb_ver == V5)
ch_offset = SPMI_V5_OBS_CH_OFFSET(channel);
else
ch_offset = SPMI_CH_OFFSET(channel);
/* Disable IRQ mode for the current channel*/
writel(0x0, priv->spmi_obs + ch_offset + SPMI_REG_CONFIG);
/* Prepare read command */
reg |= SPMI_CMD_EXT_REG_READ_LONG << SPMI_CMD_OPCODE_SHIFT;
reg |= (usid << SPMI_CMD_SLAVE_ID_SHIFT);
reg |= (pid << SPMI_CMD_ADDR_SHIFT);
reg |= (off << SPMI_CMD_ADDR_OFFSET_SHIFT);
reg |= 1; /* byte count */
/* Request read */
writel(reg, priv->spmi_obs + ch_offset + SPMI_REG_CMD0);
/* Wait till CMD DONE status */
reg = 0;
while (!reg) {
reg = readl(priv->spmi_obs + ch_offset + SPMI_REG_STATUS);
}
if (reg ^ SPMI_STATUS_DONE) {
printf("SPMI read failure.\n");
return -EIO;
}
/* Read the data */
return readl(priv->spmi_obs + ch_offset +
SPMI_REG_RDATA) & 0xFF;
}
static struct dm_spmi_ops msm_spmi_ops = {
.read = msm_spmi_read,
.write = msm_spmi_write,
};
static int msm_spmi_probe(struct udevice *dev)
{
struct msm_spmi_priv *priv = dev_get_priv(dev);
phys_addr_t core_addr;
u32 hw_ver;
int i;
core_addr = dev_read_addr_name(dev, "core");
priv->spmi_chnls = dev_read_addr_name(dev, "chnls");
priv->spmi_obs = dev_read_addr_name(dev, "obsrvr");
hw_ver = readl(core_addr + PMIC_ARB_VERSION);
if (hw_ver < PMIC_ARB_VERSION_V3_MIN) {
priv->arb_ver = V2;
priv->arb_chnl = core_addr + APID_MAP_OFFSET_V1_V2_V3;
} else if (hw_ver < PMIC_ARB_VERSION_V5_MIN) {
priv->arb_ver = V3;
priv->arb_chnl = core_addr + APID_MAP_OFFSET_V1_V2_V3;
} else {
priv->arb_ver = V5;
priv->arb_chnl = core_addr + APID_MAP_OFFSET_V5;
}
dev_dbg(dev, "PMIC Arb Version-%d (%#x)\n", hw_ver >> 28, hw_ver);
if (priv->arb_chnl == FDT_ADDR_T_NONE ||
priv->spmi_chnls == FDT_ADDR_T_NONE ||
priv->spmi_obs == FDT_ADDR_T_NONE)
return -EINVAL;
dev_dbg(dev, "priv->arb_chnl address (%#08llx)\n", priv->arb_chnl);
dev_dbg(dev, "priv->spmi_chnls address (%#08llx)\n", priv->spmi_chnls);
dev_dbg(dev, "priv->spmi_obs address (%#08llx)\n", priv->spmi_obs);
/* Scan peripherals connected to each SPMI channel */
for (i = 0; i < SPMI_MAX_PERIPH; i++) {
uint32_t periph = readl(priv->arb_chnl + ARB_CHANNEL_OFFSET(i));
uint8_t slave_id = (periph & 0xf0000) >> 16;
uint8_t pid = (periph & 0xff00) >> 8;
priv->channel_map[slave_id][pid] = i;
}
return 0;
}
static const struct udevice_id msm_spmi_ids[] = {
{ .compatible = "qcom,spmi-pmic-arb" },
{ }
};
U_BOOT_DRIVER(msm_spmi) = {
.name = "msm_spmi",
.id = UCLASS_SPMI,
.of_match = msm_spmi_ids,
.ops = &msm_spmi_ops,
.probe = msm_spmi_probe,
.priv_auto = sizeof(struct msm_spmi_priv),
};