blob: 49ced8f9fae46ea8e35753f7f59e2df858915666 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Texas Instruments' OMAP serial driver
*
* Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/
* Lokesh Vutla <lokeshvutla@ti.com>
*/
#include <common.h>
#include <dm.h>
#include <dt-structs.h>
#include <log.h>
#include <ns16550.h>
#include <serial.h>
#include <clk.h>
#include <linux/err.h>
#ifndef CFG_SYS_NS16550_CLK
#define CFG_SYS_NS16550_CLK 0
#endif
#ifdef CONFIG_DEBUG_UART_OMAP
#ifndef CFG_SYS_NS16550_IER
#define CFG_SYS_NS16550_IER 0x00
#endif
#define UART_MCRVAL 0x00
#define UART_LCRVAL UART_LCR_8N1
static inline void serial_out_shift(void *addr, int shift, int value)
{
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
outb(value, (ulong)addr);
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN)
out_le32(addr, value);
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
out_be32(addr, value);
#elif defined(CONFIG_SYS_NS16550_MEM32)
writel(value, addr);
#elif defined(CONFIG_SYS_BIG_ENDIAN)
writeb(value, addr + (1 << shift) - 1);
#else
writeb(value, addr);
#endif
}
static inline int serial_in_shift(void *addr, int shift)
{
#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
return inb((ulong)addr);
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN)
return in_le32(addr);
#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN)
return in_be32(addr);
#elif defined(CONFIG_SYS_NS16550_MEM32)
return readl(addr);
#elif defined(CONFIG_SYS_BIG_ENDIAN)
return readb(addr + (1 << shift) - 1);
#else
return readb(addr);
#endif
}
#include <debug_uart.h>
static inline void _debug_uart_init(void)
{
struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE);
int baud_divisor;
baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
CONFIG_BAUDRATE);
serial_dout(&com_port->ier, CFG_SYS_NS16550_IER);
serial_dout(&com_port->mdr1, 0x7);
serial_dout(&com_port->mcr, UART_MCRVAL);
serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
serial_dout(&com_port->dll, baud_divisor & 0xff);
serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
serial_dout(&com_port->lcr, UART_LCRVAL);
serial_dout(&com_port->mdr1, 0x0);
}
static inline void _debug_uart_putc(int ch)
{
struct ns16550 *com_port = (struct ns16550 *)CONFIG_VAL(DEBUG_UART_BASE);
while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
;
serial_dout(&com_port->thr, ch);
}
DEBUG_UART_FUNCS
#endif
#if CONFIG_IS_ENABLED(DM_SERIAL)
#if CONFIG_IS_ENABLED(OF_REAL)
static int omap_serial_of_to_plat(struct udevice *dev)
{
struct ns16550_plat *plat = dev_get_plat(dev);
fdt_addr_t addr;
struct clk clk;
int err;
/* try Processor Local Bus device first */
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
plat->reg_shift = 2;
err = clk_get_by_index(dev, 0, &clk);
if (!err) {
err = clk_get_rate(&clk);
if (!IS_ERR_VALUE(err))
plat->clock = err;
} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
debug("omap serial failed to get clock\n");
return err;
}
if (!plat->clock)
plat->clock = dev_read_u32_default(dev, "clock-frequency",
CFG_SYS_NS16550_CLK);
if (!plat->clock) {
debug("omap serial clock not defined\n");
return -EINVAL;
}
plat->fcr = UART_FCR_DEFVAL;
return 0;
}
static const struct udevice_id omap_serial_ids[] = {
{ .compatible = "ti,omap2-uart", },
{ .compatible = "ti,omap3-uart", },
{ .compatible = "ti,omap4-uart", },
{ .compatible = "ti,am3352-uart", },
{ .compatible = "ti,am4372-uart", },
{ .compatible = "ti,dra742-uart", },
{ .compatible = "ti,am654-uart", },
{}
};
#endif /* OF_REAL */
#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
U_BOOT_DRIVER(omap_serial) = {
.name = "omap_serial",
.id = UCLASS_SERIAL,
#if CONFIG_IS_ENABLED(OF_REAL)
.of_match = omap_serial_ids,
.of_to_plat = omap_serial_of_to_plat,
.plat_auto = sizeof(struct ns16550_plat),
#endif
.priv_auto = sizeof(struct ns16550),
.probe = ns16550_serial_probe,
.ops = &ns16550_serial_ops,
#if !CONFIG_IS_ENABLED(OF_CONTROL)
.flags = DM_FLAG_PRE_RELOC,
#endif
};
#endif
#endif /* DM_SERIAL */