blob: 1eaff410efa4710f3f61bff2a0d2a0f47092d193 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Meson G12A USB3+PCIE Combo PHY driver
*
* Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* Copyright (C) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstron@baylibre.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <malloc.h>
#include <regmap.h>
#include <errno.h>
#include <asm/io.h>
#include <reset.h>
#include <bitfield.h>
#include <generic-phy.h>
#include <linux/delay.h>
#include <linux/printk.h>
#include <linux/bitops.h>
#include <linux/compat.h>
#include <linux/bitfield.h>
#define PHY_TYPE_PCIE 2
#define PHY_TYPE_USB3 4
#define PHY_R0 0x00
#define PHY_R0_PCIE_POWER_STATE GENMASK(4, 0)
#define PHY_R0_PCIE_USB3_SWITCH GENMASK(6, 5)
#define PHY_R1 0x04
#define PHY_R1_PHY_TX1_TERM_OFFSET GENMASK(4, 0)
#define PHY_R1_PHY_TX0_TERM_OFFSET GENMASK(9, 5)
#define PHY_R1_PHY_RX1_EQ GENMASK(12, 10)
#define PHY_R1_PHY_RX0_EQ GENMASK(15, 13)
#define PHY_R1_PHY_LOS_LEVEL GENMASK(20, 16)
#define PHY_R1_PHY_LOS_BIAS GENMASK(23, 21)
#define PHY_R1_PHY_REF_CLKDIV2 BIT(24)
#define PHY_R1_PHY_MPLL_MULTIPLIER GENMASK(31, 25)
#define PHY_R2 0x08
#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB GENMASK(5, 0)
#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB GENMASK(11, 6)
#define PHY_R2_PCS_TX_DEEMPH_GEN1 GENMASK(17, 12)
#define PHY_R2_PHY_TX_VBOOST_LVL GENMASK(20, 18)
#define PHY_R4 0x10
#define PHY_R4_PHY_CR_WRITE BIT(0)
#define PHY_R4_PHY_CR_READ BIT(1)
#define PHY_R4_PHY_CR_DATA_IN GENMASK(17, 2)
#define PHY_R4_PHY_CR_CAP_DATA BIT(18)
#define PHY_R4_PHY_CR_CAP_ADDR BIT(19)
#define PHY_R5 0x14
#define PHY_R5_PHY_CR_DATA_OUT GENMASK(15, 0)
#define PHY_R5_PHY_CR_ACK BIT(16)
#define PHY_R5_PHY_BS_OUT BIT(17)
#define PCIE_RESET_DELAY 500
struct phy_g12a_usb3_pcie_priv {
struct regmap *regmap;
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
#endif
struct reset_ctl_bulk resets;
};
static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
unsigned int addr)
{
unsigned int val, reg;
int ret;
reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
!(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
return 0;
}
static int
phy_g12a_usb3_pcie_cr_bus_read(struct phy_g12a_usb3_pcie_priv *priv,
unsigned int addr, unsigned int *data)
{
unsigned int val;
int ret;
ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, 0);
regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);
regmap_write(priv->regmap, PHY_R4, 0);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
!(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
return 0;
}
static int
phy_g12a_usb3_pcie_cr_bus_write(struct phy_g12a_usb3_pcie_priv *priv,
unsigned int addr, unsigned int data)
{
unsigned int val, reg;
int ret;
ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
if (ret)
return ret;
reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK) == 0,
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK),
5, 1000);
if (ret)
return ret;
regmap_write(priv->regmap, PHY_R4, reg);
ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
(val & PHY_R5_PHY_CR_ACK) == 0,
5, 1000);
if (ret)
return ret;
return 0;
}
static int
phy_g12a_usb3_pcie_cr_bus_update_bits(struct phy_g12a_usb3_pcie_priv *priv,
uint offset, uint mask, uint val)
{
uint reg;
int ret;
ret = phy_g12a_usb3_pcie_cr_bus_read(priv, offset, &reg);
if (ret)
return ret;
reg &= ~mask;
return phy_g12a_usb3_pcie_cr_bus_write(priv, offset, reg | val);
}
static int phy_meson_g12a_usb3_init(struct phy *phy)
{
struct udevice *dev = phy->dev;
struct phy_g12a_usb3_pcie_priv *priv = dev_get_priv(dev);
unsigned int data;
int ret;
ret = reset_assert_bulk(&priv->resets);
udelay(1);
ret |= reset_deassert_bulk(&priv->resets);
if (ret)
return ret;
/* Switch PHY to USB3 */
regmap_update_bits(priv->regmap, PHY_R0,
PHY_R0_PCIE_USB3_SWITCH,
PHY_R0_PCIE_USB3_SWITCH);
/*
* WORKAROUND: There is SSPHY suspend bug due to
* which USB enumerates
* in HS mode instead of SS mode. Workaround it by asserting
* LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
* mode
*/
ret = phy_g12a_usb3_pcie_cr_bus_update_bits(priv, 0x102d,
BIT(7), BIT(7));
if (ret)
return ret;
ret = phy_g12a_usb3_pcie_cr_bus_update_bits(priv, 0x1010, 0xff0, 20);
if (ret)
return ret;
/*
* Fix RX Equalization setting as follows
* LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
* LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
* LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
* LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
*/
ret = phy_g12a_usb3_pcie_cr_bus_read(priv, 0x1006, &data);
if (ret)
return ret;
data &= ~BIT(6);
data |= BIT(7);
data &= ~(0x7 << 8);
data |= (0x3 << 8);
data |= (1 << 11);
ret = phy_g12a_usb3_pcie_cr_bus_write(priv, 0x1006, data);
if (ret)
return ret;
/*
* Set EQ and TX launch amplitudes as follows
* LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
* LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
* LANE0.TX_OVRD_DRV_LO.EN set to 1.
*/
ret = phy_g12a_usb3_pcie_cr_bus_read(priv, 0x1002, &data);
if (ret)
return ret;
data &= ~0x3f80;
data |= (0x16 << 7);
data &= ~0x7f;
data |= (0x7f | BIT(14));
ret = phy_g12a_usb3_pcie_cr_bus_write(priv, 0x1002, data);
if (ret)
return ret;
/*
* MPLL_LOOP_CTL.PROP_CNTRL = 8
*/
ret = phy_g12a_usb3_pcie_cr_bus_update_bits(priv, 0x30,
0xf << 4, 8 << 4);
if (ret)
return ret;
regmap_update_bits(priv->regmap, PHY_R2,
PHY_R2_PHY_TX_VBOOST_LVL,
FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));
regmap_update_bits(priv->regmap, PHY_R1,
PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));
return ret;
}
static int phy_meson_g12a_usb3_exit(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = dev_get_priv(phy->dev);
return reset_assert_bulk(&priv->resets);
}
static int phy_meson_g12a_usb3_pcie_init(struct phy *phy)
{
if (phy->id == PHY_TYPE_USB3)
return phy_meson_g12a_usb3_init(phy);
return 0;
}
static int phy_meson_g12a_usb3_pcie_exit(struct phy *phy)
{
if (phy->id == PHY_TYPE_USB3)
return phy_meson_g12a_usb3_exit(phy);
return 0;
}
static int phy_meson_g12a_usb3_pcie_power_on(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = dev_get_priv(phy->dev);
if (phy->id == PHY_TYPE_USB3)
return 0;
regmap_update_bits(priv->regmap, PHY_R0,
PHY_R0_PCIE_POWER_STATE,
FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
return 0;
}
static int phy_meson_g12a_usb3_pcie_power_off(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = dev_get_priv(phy->dev);
if (phy->id == PHY_TYPE_USB3)
return 0;
regmap_update_bits(priv->regmap, PHY_R0,
PHY_R0_PCIE_POWER_STATE,
FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1d));
return 0;
}
static int phy_meson_g12a_usb3_pcie_reset(struct phy *phy)
{
struct phy_g12a_usb3_pcie_priv *priv = dev_get_priv(phy->dev);
int ret;
if (phy->id == PHY_TYPE_USB3)
return 0;
ret = reset_assert_bulk(&priv->resets);
if (ret)
return ret;
udelay(PCIE_RESET_DELAY);
ret = reset_deassert_bulk(&priv->resets);
if (ret)
return ret;
udelay(PCIE_RESET_DELAY);
return 0;
}
struct phy_ops meson_g12a_usb3_pcie_phy_ops = {
.init = phy_meson_g12a_usb3_pcie_init,
.exit = phy_meson_g12a_usb3_pcie_exit,
.power_on = phy_meson_g12a_usb3_pcie_power_on,
.power_off = phy_meson_g12a_usb3_pcie_power_off,
.reset = phy_meson_g12a_usb3_pcie_reset,
};
int meson_g12a_usb3_pcie_phy_probe(struct udevice *dev)
{
struct phy_g12a_usb3_pcie_priv *priv = dev_get_priv(dev);
int ret;
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
if (ret)
return ret;
ret = reset_get_bulk(dev, &priv->resets);
if (ret == -ENOTSUPP)
return 0;
else if (ret)
return ret;
#if CONFIG_IS_ENABLED(CLK)
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0)
return ret;
ret = clk_enable(&priv->clk);
if (ret && ret != -ENOENT && ret != -ENOTSUPP) {
pr_err("failed to enable PHY clock\n");
return ret;
}
#endif
return 0;
}
static const struct udevice_id meson_g12a_usb3_pcie_phy_ids[] = {
{ .compatible = "amlogic,g12a-usb3-pcie-phy" },
{ }
};
U_BOOT_DRIVER(meson_g12a_usb3_pcie_phy) = {
.name = "meson_g12a_usb3_pcie_phy",
.id = UCLASS_PHY,
.of_match = meson_g12a_usb3_pcie_phy_ids,
.probe = meson_g12a_usb3_pcie_phy_probe,
.ops = &meson_g12a_usb3_pcie_phy_ops,
.priv_auto = sizeof(struct phy_g12a_usb3_pcie_priv),
};