blob: 9679a45b0758fae6f4398033bb1dfe7b83d4c17e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
*
* Derived from linux/drivers/net/ethernet/broadcom/bcm63xx_enet.c:
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <dma.h>
#include <log.h>
#include <malloc.h>
#include <miiphy.h>
#include <net.h>
#include <reset.h>
#include <wait_bit.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/delay.h>
#include <linux/printk.h>
#define ETH_PORT_STR "brcm,enetsw-port"
#define ETH_RX_DESC PKTBUFSRX
#define ETH_ZLEN 60
#define ETH_TIMEOUT 100
#define ETH_MAX_PORT 8
#define ETH_RGMII_PORT0 4
/* Port traffic control */
#define ETH_PTCTRL_REG(x) (0x0 + (x))
#define ETH_PTCTRL_RXDIS_SHIFT 0
#define ETH_PTCTRL_RXDIS_MASK (1 << ETH_PTCTRL_RXDIS_SHIFT)
#define ETH_PTCTRL_TXDIS_SHIFT 1
#define ETH_PTCTRL_TXDIS_MASK (1 << ETH_PTCTRL_TXDIS_SHIFT)
/* Switch mode register */
#define ETH_SWMODE_REG 0xb
#define ETH_SWMODE_FWD_EN_SHIFT 1
#define ETH_SWMODE_FWD_EN_MASK (1 << ETH_SWMODE_FWD_EN_SHIFT)
/* IMP override Register */
#define ETH_IMPOV_REG 0xe
#define ETH_IMPOV_LINKUP_SHIFT 0
#define ETH_IMPOV_LINKUP_MASK (1 << ETH_IMPOV_LINKUP_SHIFT)
#define ETH_IMPOV_FDX_SHIFT 1
#define ETH_IMPOV_FDX_MASK (1 << ETH_IMPOV_FDX_SHIFT)
#define ETH_IMPOV_100_SHIFT 2
#define ETH_IMPOV_100_MASK (1 << ETH_IMPOV_100_SHIFT)
#define ETH_IMPOV_1000_SHIFT 3
#define ETH_IMPOV_1000_MASK (1 << ETH_IMPOV_1000_SHIFT)
#define ETH_IMPOV_RXFLOW_SHIFT 4
#define ETH_IMPOV_RXFLOW_MASK (1 << ETH_IMPOV_RXFLOW_SHIFT)
#define ETH_IMPOV_TXFLOW_SHIFT 5
#define ETH_IMPOV_TXFLOW_MASK (1 << ETH_IMPOV_TXFLOW_SHIFT)
#define ETH_IMPOV_FORCE_SHIFT 7
#define ETH_IMPOV_FORCE_MASK (1 << ETH_IMPOV_FORCE_SHIFT)
/* Port override Register */
#define ETH_PORTOV_REG(x) (0x58 + (x))
#define ETH_PORTOV_LINKUP_SHIFT 0
#define ETH_PORTOV_LINKUP_MASK (1 << ETH_PORTOV_LINKUP_SHIFT)
#define ETH_PORTOV_FDX_SHIFT 1
#define ETH_PORTOV_FDX_MASK (1 << ETH_PORTOV_FDX_SHIFT)
#define ETH_PORTOV_100_SHIFT 2
#define ETH_PORTOV_100_MASK (1 << ETH_PORTOV_100_SHIFT)
#define ETH_PORTOV_1000_SHIFT 3
#define ETH_PORTOV_1000_MASK (1 << ETH_PORTOV_1000_SHIFT)
#define ETH_PORTOV_RXFLOW_SHIFT 4
#define ETH_PORTOV_RXFLOW_MASK (1 << ETH_PORTOV_RXFLOW_SHIFT)
#define ETH_PORTOV_TXFLOW_SHIFT 5
#define ETH_PORTOV_TXFLOW_MASK (1 << ETH_PORTOV_TXFLOW_SHIFT)
#define ETH_PORTOV_ENABLE_SHIFT 6
#define ETH_PORTOV_ENABLE_MASK (1 << ETH_PORTOV_ENABLE_SHIFT)
/* Port RGMII control register */
#define ETH_RGMII_CTRL_REG(x) (0x60 + (x))
#define ETH_RGMII_CTRL_GMII_CLK_EN (1 << 7)
#define ETH_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
#define ETH_RGMII_CTRL_MII_MODE_MASK (3 << 4)
#define ETH_RGMII_CTRL_RGMII_MODE (0 << 4)
#define ETH_RGMII_CTRL_MII_MODE (1 << 4)
#define ETH_RGMII_CTRL_RVMII_MODE (2 << 4)
#define ETH_RGMII_CTRL_TIMING_SEL_EN (1 << 0)
/* Port RGMII timing register */
#define ENETSW_RGMII_TIMING_REG(x) (0x68 + (x))
/* MDIO control register */
#define MII_SC_REG 0xb0
#define MII_SC_EXT_SHIFT 16
#define MII_SC_EXT_MASK (1 << MII_SC_EXT_SHIFT)
#define MII_SC_REG_SHIFT 20
#define MII_SC_PHYID_SHIFT 25
#define MII_SC_RD_SHIFT 30
#define MII_SC_RD_MASK (1 << MII_SC_RD_SHIFT)
#define MII_SC_WR_SHIFT 31
#define MII_SC_WR_MASK (1 << MII_SC_WR_SHIFT)
/* MDIO data register */
#define MII_DAT_REG 0xb4
/* Global Management Configuration Register */
#define ETH_GMCR_REG 0x200
#define ETH_GMCR_RST_MIB_SHIFT 0
#define ETH_GMCR_RST_MIB_MASK (1 << ETH_GMCR_RST_MIB_SHIFT)
/* Jumbo control register port mask register */
#define ETH_JMBCTL_PORT_REG 0x4004
/* Jumbo control mib good frame register */
#define ETH_JMBCTL_MAXSIZE_REG 0x4008
/* ETH port data */
struct bcm_enetsw_port {
bool used;
const char *name;
/* Config */
bool bypass_link;
int force_speed;
bool force_duplex_full;
/* PHY */
int phy_id;
};
/* ETH data */
struct bcm6368_eth_priv {
void __iomem *base;
/* DMA */
struct dma rx_dma;
struct dma tx_dma;
/* Ports */
uint8_t num_ports;
struct bcm_enetsw_port used_ports[ETH_MAX_PORT];
int sw_port_link[ETH_MAX_PORT];
bool rgmii_override;
bool rgmii_timing;
/* PHY */
int phy_id;
};
static inline bool bcm_enet_port_is_rgmii(int portid)
{
return portid >= ETH_RGMII_PORT0;
}
static int bcm6368_mdio_read(struct bcm6368_eth_priv *priv, uint8_t ext,
int phy_id, int reg)
{
uint32_t val;
writel_be(0, priv->base + MII_SC_REG);
val = MII_SC_RD_MASK |
(phy_id << MII_SC_PHYID_SHIFT) |
(reg << MII_SC_REG_SHIFT);
if (ext)
val |= MII_SC_EXT_MASK;
writel_be(val, priv->base + MII_SC_REG);
udelay(50);
return readw_be(priv->base + MII_DAT_REG);
}
static int bcm6368_mdio_write(struct bcm6368_eth_priv *priv, uint8_t ext,
int phy_id, int reg, u16 data)
{
uint32_t val;
writel_be(0, priv->base + MII_SC_REG);
val = MII_SC_WR_MASK |
(phy_id << MII_SC_PHYID_SHIFT) |
(reg << MII_SC_REG_SHIFT);
if (ext)
val |= MII_SC_EXT_MASK;
val |= data;
writel_be(val, priv->base + MII_SC_REG);
udelay(50);
return 0;
}
static int bcm6368_eth_free_pkt(struct udevice *dev, uchar *packet, int len)
{
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
return dma_prepare_rcv_buf(&priv->rx_dma, packet, len);
}
static int bcm6368_eth_recv(struct udevice *dev, int flags, uchar **packetp)
{
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
return dma_receive(&priv->rx_dma, (void**)packetp, NULL);
}
static int bcm6368_eth_send(struct udevice *dev, void *packet, int length)
{
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
/* pad packets smaller than ETH_ZLEN */
if (length < ETH_ZLEN) {
memset(packet + length, 0, ETH_ZLEN - length);
length = ETH_ZLEN;
}
return dma_send(&priv->tx_dma, packet, length, NULL);
}
static int bcm6368_eth_adjust_link(struct udevice *dev)
{
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
unsigned int i;
for (i = 0; i < priv->num_ports; i++) {
struct bcm_enetsw_port *port;
int val, j, up, adv, lpa, speed, duplex, media;
int external_phy = bcm_enet_port_is_rgmii(i);
u8 override;
port = &priv->used_ports[i];
if (!port->used)
continue;
if (port->bypass_link)
continue;
/* dummy read to clear */
for (j = 0; j < 2; j++)
val = bcm6368_mdio_read(priv, external_phy,
port->phy_id, MII_BMSR);
if (val == 0xffff)
continue;
up = (val & BMSR_LSTATUS) ? 1 : 0;
if (!(up ^ priv->sw_port_link[i]))
continue;
priv->sw_port_link[i] = up;
/* link changed */
if (!up) {
dev_info(dev, "link DOWN on %s\n", port->name);
writeb_be(ETH_PORTOV_ENABLE_MASK,
priv->base + ETH_PORTOV_REG(i));
writeb_be(ETH_PTCTRL_RXDIS_MASK |
ETH_PTCTRL_TXDIS_MASK,
priv->base + ETH_PTCTRL_REG(i));
continue;
}
adv = bcm6368_mdio_read(priv, external_phy,
port->phy_id, MII_ADVERTISE);
lpa = bcm6368_mdio_read(priv, external_phy, port->phy_id,
MII_LPA);
/* figure out media and duplex from advertise and LPA values */
media = mii_nway_result(lpa & adv);
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
speed = 100;
else
speed = 10;
if (val & BMSR_ESTATEN) {
adv = bcm6368_mdio_read(priv, external_phy,
port->phy_id, MII_CTRL1000);
lpa = bcm6368_mdio_read(priv, external_phy,
port->phy_id, MII_STAT1000);
if ((adv & (ADVERTISE_1000FULL | ADVERTISE_1000HALF)) &&
(lpa & (LPA_1000FULL | LPA_1000HALF))) {
speed = 1000;
duplex = (lpa & LPA_1000FULL);
}
}
pr_alert("link UP on %s, %dMbps, %s-duplex\n",
port->name, speed, duplex ? "full" : "half");
override = ETH_PORTOV_ENABLE_MASK |
ETH_PORTOV_LINKUP_MASK;
if (speed == 1000)
override |= ETH_PORTOV_1000_MASK;
else if (speed == 100)
override |= ETH_PORTOV_100_MASK;
if (duplex)
override |= ETH_PORTOV_FDX_MASK;
writeb_be(override, priv->base + ETH_PORTOV_REG(i));
writeb_be(0, priv->base + ETH_PTCTRL_REG(i));
}
return 0;
}
static int bcm6368_eth_start(struct udevice *dev)
{
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
uint8_t i;
/* disable all ports */
for (i = 0; i < priv->num_ports; i++) {
setbits_8(priv->base + ETH_PORTOV_REG(i),
ETH_PORTOV_ENABLE_MASK);
setbits_8(priv->base + ETH_PTCTRL_REG(i),
ETH_PTCTRL_RXDIS_MASK | ETH_PTCTRL_TXDIS_MASK);
priv->sw_port_link[i] = 0;
}
/* enable external ports */
for (i = ETH_RGMII_PORT0; i < priv->num_ports; i++) {
u8 rgmii_ctrl = ETH_RGMII_CTRL_GMII_CLK_EN;
if (!priv->used_ports[i].used)
continue;
if (priv->rgmii_override)
rgmii_ctrl |= ETH_RGMII_CTRL_MII_OVERRIDE_EN;
if (priv->rgmii_timing)
rgmii_ctrl |= ETH_RGMII_CTRL_TIMING_SEL_EN;
setbits_8(priv->base + ETH_RGMII_CTRL_REG(i), rgmii_ctrl);
}
/* reset mib */
setbits_8(priv->base + ETH_GMCR_REG, ETH_GMCR_RST_MIB_MASK);
mdelay(1);
clrbits_8(priv->base + ETH_GMCR_REG, ETH_GMCR_RST_MIB_MASK);
mdelay(1);
/* force CPU port state */
setbits_8(priv->base + ETH_IMPOV_REG,
ETH_IMPOV_FORCE_MASK | ETH_IMPOV_LINKUP_MASK);
/* enable switch forward engine */
setbits_8(priv->base + ETH_SWMODE_REG, ETH_SWMODE_FWD_EN_MASK);
/* prepare rx dma buffers */
for (i = 0; i < ETH_RX_DESC; i++) {
int ret = dma_prepare_rcv_buf(&priv->rx_dma, net_rx_packets[i],
PKTSIZE_ALIGN);
if (ret < 0)
break;
}
/* enable dma rx channel */
dma_enable(&priv->rx_dma);
/* enable dma tx channel */
dma_enable(&priv->tx_dma);
/* apply override config for bypass_link ports here. */
for (i = 0; i < priv->num_ports; i++) {
struct bcm_enetsw_port *port;
u8 override;
port = &priv->used_ports[i];
if (!port->used)
continue;
if (!port->bypass_link)
continue;
override = ETH_PORTOV_ENABLE_MASK |
ETH_PORTOV_LINKUP_MASK;
switch (port->force_speed) {
case 1000:
override |= ETH_PORTOV_1000_MASK;
break;
case 100:
override |= ETH_PORTOV_100_MASK;
break;
case 10:
break;
default:
pr_warn("%s: invalid forced speed on port %s\n",
__func__, port->name);
break;
}
if (port->force_duplex_full)
override |= ETH_PORTOV_FDX_MASK;
writeb_be(override, priv->base + ETH_PORTOV_REG(i));
writeb_be(0, priv->base + ETH_PTCTRL_REG(i));
}
bcm6368_eth_adjust_link(dev);
return 0;
}
static void bcm6368_eth_stop(struct udevice *dev)
{
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
uint8_t i;
/* disable all ports */
for (i = 0; i < priv->num_ports; i++) {
setbits_8(priv->base + ETH_PORTOV_REG(i),
ETH_PORTOV_ENABLE_MASK);
setbits_8(priv->base + ETH_PTCTRL_REG(i),
ETH_PTCTRL_RXDIS_MASK | ETH_PTCTRL_TXDIS_MASK);
}
/* disable external ports */
for (i = ETH_RGMII_PORT0; i < priv->num_ports; i++) {
if (!priv->used_ports[i].used)
continue;
clrbits_8(priv->base + ETH_RGMII_CTRL_REG(i),
ETH_RGMII_CTRL_GMII_CLK_EN);
}
/* disable CPU port */
clrbits_8(priv->base + ETH_IMPOV_REG,
ETH_IMPOV_FORCE_MASK | ETH_IMPOV_LINKUP_MASK);
/* disable switch forward engine */
clrbits_8(priv->base + ETH_SWMODE_REG, ETH_SWMODE_FWD_EN_MASK);
/* disable dma rx channel */
dma_disable(&priv->rx_dma);
/* disable dma tx channel */
dma_disable(&priv->tx_dma);
}
static const struct eth_ops bcm6368_eth_ops = {
.free_pkt = bcm6368_eth_free_pkt,
.recv = bcm6368_eth_recv,
.send = bcm6368_eth_send,
.start = bcm6368_eth_start,
.stop = bcm6368_eth_stop,
};
static const struct udevice_id bcm6368_eth_ids[] = {
{ .compatible = "brcm,bcm6368-enet", },
{ /* sentinel */ }
};
static bool bcm6368_phy_is_external(struct bcm6368_eth_priv *priv, int phy_id)
{
uint8_t i;
for (i = 0; i < priv->num_ports; ++i) {
if (!priv->used_ports[i].used)
continue;
if (priv->used_ports[i].phy_id == phy_id)
return bcm_enet_port_is_rgmii(i);
}
return true;
}
static int bcm6368_mii_mdio_read(struct mii_dev *bus, int addr, int devaddr,
int reg)
{
struct bcm6368_eth_priv *priv = bus->priv;
bool ext = bcm6368_phy_is_external(priv, addr);
return bcm6368_mdio_read(priv, ext, addr, reg);
}
static int bcm6368_mii_mdio_write(struct mii_dev *bus, int addr, int devaddr,
int reg, u16 data)
{
struct bcm6368_eth_priv *priv = bus->priv;
bool ext = bcm6368_phy_is_external(priv, addr);
return bcm6368_mdio_write(priv, ext, addr, reg, data);
}
static int bcm6368_mdio_init(const char *name, struct bcm6368_eth_priv *priv)
{
struct mii_dev *bus;
bus = mdio_alloc();
if (!bus) {
pr_err("%s: failed to allocate MDIO bus\n", __func__);
return -ENOMEM;
}
bus->read = bcm6368_mii_mdio_read;
bus->write = bcm6368_mii_mdio_write;
bus->priv = priv;
snprintf(bus->name, sizeof(bus->name), "%s", name);
return mdio_register(bus);
}
static int bcm6368_eth_probe(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
struct bcm6368_eth_priv *priv = dev_get_priv(dev);
int num_ports, ret, i;
ofnode node;
/* get base address */
priv->base = dev_remap_addr(dev);
if (!priv->base)
return -EINVAL;
pdata->iobase = (phys_addr_t) priv->base;
/* get number of ports */
num_ports = dev_read_u32_default(dev, "brcm,num-ports", ETH_MAX_PORT);
if (!num_ports || num_ports > ETH_MAX_PORT)
return -EINVAL;
/* get dma channels */
ret = dma_get_by_name(dev, "tx", &priv->tx_dma);
if (ret)
return -EINVAL;
ret = dma_get_by_name(dev, "rx", &priv->rx_dma);
if (ret)
return -EINVAL;
/* try to enable clocks */
for (i = 0; ; i++) {
struct clk clk;
int ret;
ret = clk_get_by_index(dev, i, &clk);
if (ret < 0)
break;
ret = clk_enable(&clk);
if (ret < 0) {
pr_err("%s: error enabling clock %d\n", __func__, i);
return ret;
}
}
/* try to perform resets */
for (i = 0; ; i++) {
struct reset_ctl reset;
int ret;
ret = reset_get_by_index(dev, i, &reset);
if (ret < 0)
break;
ret = reset_deassert(&reset);
if (ret < 0) {
pr_err("%s: error deasserting reset %d\n", __func__, i);
return ret;
}
ret = reset_free(&reset);
if (ret < 0) {
pr_err("%s: error freeing reset %d\n", __func__, i);
return ret;
}
}
/* set priv data */
priv->num_ports = num_ports;
if (dev_read_bool(dev, "brcm,rgmii-override"))
priv->rgmii_override = true;
if (dev_read_bool(dev, "brcm,rgmii-timing"))
priv->rgmii_timing = true;
/* get ports */
dev_for_each_subnode(node, dev) {
const char *comp;
const char *label;
unsigned int p;
int phy_id;
int speed;
comp = ofnode_read_string(node, "compatible");
if (!comp || memcmp(comp, ETH_PORT_STR, sizeof(ETH_PORT_STR)))
continue;
p = ofnode_read_u32_default(node, "reg", ETH_MAX_PORT);
if (p >= num_ports)
return -EINVAL;
label = ofnode_read_string(node, "label");
if (!label) {
debug("%s: node %s has no label\n", __func__,
ofnode_get_name(node));
return -EINVAL;
}
phy_id = ofnode_read_u32_default(node, "brcm,phy-id", -1);
priv->used_ports[p].used = true;
priv->used_ports[p].name = label;
priv->used_ports[p].phy_id = phy_id;
if (ofnode_read_bool(node, "full-duplex"))
priv->used_ports[p].force_duplex_full = true;
if (ofnode_read_bool(node, "bypass-link"))
priv->used_ports[p].bypass_link = true;
speed = ofnode_read_u32_default(node, "speed", 0);
if (speed)
priv->used_ports[p].force_speed = speed;
}
/* init mii bus */
ret = bcm6368_mdio_init(dev->name, priv);
if (ret)
return ret;
/* enable jumbo on all ports */
writel_be(0x1ff, priv->base + ETH_JMBCTL_PORT_REG);
writew_be(9728, priv->base + ETH_JMBCTL_MAXSIZE_REG);
return 0;
}
U_BOOT_DRIVER(bcm6368_eth) = {
.name = "bcm6368_eth",
.id = UCLASS_ETH,
.of_match = bcm6368_eth_ids,
.ops = &bcm6368_eth_ops,
.plat_auto = sizeof(struct eth_pdata),
.priv_auto = sizeof(struct bcm6368_eth_priv),
.probe = bcm6368_eth_probe,
};