blob: 5710934000f636c864f27d0e4bc5427f1cbe086e [file] [log] [blame]
#
# For a description of the syntax of this configuration file,
# see the file Documentation/kbuild/kconfig-language.txt in the
# Linux kernel source tree.
#
mainmenu "U-Boot $(UBOOTVERSION) Configuration"
comment "Compiler: $(CC_VERSION_TEXT)"
source "scripts/Kconfig.include"
# Allow defaults in arch-specific code to override any given here
source "arch/Kconfig"
menu "General setup"
config BROKEN
bool
help
This option cannot be enabled. It is used as dependency
for broken and incomplete features.
config DEPRECATED
bool
help
This option cannot be enabled. It it used as a dependency for
code that relies on deprecated features that will be removed and
the conversion deadline has passed.
config LOCALVERSION
string "Local version - append to U-Boot release"
help
Append an extra string to the end of your U-Boot version.
This will show up in your boot log, for example.
The string you set here will be appended after the contents of
any files with a filename matching localversion* in your
object and source tree, in that order. Your total string can
be a maximum of 64 characters.
config LOCALVERSION_AUTO
bool "Automatically append version information to the version string"
default y
help
This will try to automatically determine if the current tree is a
release tree by looking for Git tags that belong to the current
top of tree revision.
A string of the format -gxxxxxxxx will be added to the localversion
if a Git-based tree is found. The string generated by this will be
appended after any matching localversion* files, and after the value
set in CONFIG_LOCALVERSION.
(The actual string used here is the first eight characters produced
by running the command:
$ git rev-parse --verify HEAD
which is done within the script "scripts/setlocalversion".)
config CC_IS_GCC
def_bool $(success,$(CC) --version | head -n 1 | grep -q gcc)
config GCC_VERSION
int
default $(shell,$(srctree)/scripts/gcc-version.sh -p $(CC) | sed 's/^0*//') if CC_IS_GCC
default 0
config CC_IS_CLANG
def_bool $(success,$(CC) --version | head -n 1 | grep -q clang)
config CLANG_VERSION
int
default $(shell,$(srctree)/scripts/clang-version.sh $(CC))
choice
prompt "Optimization level"
default CC_OPTIMIZE_FOR_SIZE
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
help
Enabling this option will pass "-Os" to gcc, resulting in a smaller
U-Boot image.
This option is enabled by default for U-Boot.
config CC_OPTIMIZE_FOR_SPEED
bool "Optimize for speed"
help
Enabling this option will pass "-O2" to gcc, resulting in a faster
U-Boot image.
config CC_OPTIMIZE_FOR_DEBUG
bool "Optimize for debugging"
help
Enabling this option will pass "-Og" to gcc, enabling optimizations
which don't interfere with debugging.
endchoice
config OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline' in full U-Boot"
help
This option determines if U-Boot forces gcc to inline the functions
developers have marked 'inline'. Doing so takes away freedom from gcc to
do what it thinks is best, which is desirable in some cases for size
reasons.
config SPL_OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline' in SPL"
depends on SPL
help
This option determines if U-Boot forces gcc to inline the functions
developers have marked 'inline'. Doing so takes away freedom from gcc to
do what it thinks is best, which is desirable in some cases for size
reasons.
config ARCH_SUPPORTS_LTO
bool
config LTO
bool "Enable Link Time Optimizations"
depends on ARCH_SUPPORTS_LTO
help
This option enables Link Time Optimization (LTO), a mechanism which
allows the compiler to optimize between different compilation units.
This can optimize away dead code paths, resulting in smaller binary
size (if CC_OPTIMIZE_FOR_SIZE is enabled).
This option is not available for every architecture and may
introduce bugs.
Currently, when compiling with GCC, due to a weird bug regarding
jobserver, the final linking will not respect make's --jobs argument.
Instead all available processors will be used (as reported by the
nproc command).
If unsure, say n.
config TPL_OPTIMIZE_INLINING
bool "Allow compiler to uninline functions marked 'inline' in TPL"
depends on TPL
help
This option determines if U-Boot forces gcc to inline the functions
developers have marked 'inline'. Doing so takes away freedom from gcc to
do what it thinks is best, which is desirable in some cases for size
reasons.
config CC_COVERAGE
bool "Enable code coverage analysis"
depends on SANDBOX
help
Enabling this option will pass "--coverage" to gcc to compile
and link code instrumented for coverage analysis.
config ASAN
bool "Enable AddressSanitizer"
depends on SANDBOX
help
Enables AddressSanitizer to discover out-of-bounds accesses,
use-after-free, double-free and memory leaks.
config FUZZ
bool "Enable fuzzing"
depends on CC_IS_CLANG
depends on DM_FUZZING_ENGINE
select ASAN
help
Enables the fuzzing infrastructure to generate fuzzing data and run
fuzz tests.
config CC_HAS_ASM_INLINE
def_bool $(success,echo 'void foo(void) { asm inline (""); }' | $(CC) -x c - -c -o /dev/null)
config XEN
bool "Select U-Boot be run as a bootloader for XEN Virtual Machine"
depends on ARM64
select SSCANF
help
Enabling this option will make U-Boot be run as a bootloader
for XEN [1] Virtual Machine.
Xen is a virtual machine monitor (VMM) or a type-1 hypervisor with support
for para-virtualization. Xen can organize the safe execution of several
virtual machines on the same physical system with performance close to
native. It is used as the basis for a number of different commercial and
open source applications, such as: server virtualization, Infrastructure
as a Service (IaaS), desktop virtualization, security applications,
embedded and hardware appliances.
Xen has a special VM called Domain-0 that runs the Dom0 kernel and allows
Xen to use the device drivers for the Domain-0 kernel by default.
[1] - https://xenproject.org/
config ENV_VARS_UBOOT_CONFIG
bool "Add arch, board, vendor and soc variables to default environment"
help
Define this in order to add variables describing the
U-Boot build configuration to the default environment.
These will be named arch, cpu, board, vendor, and soc.
Enabling this option will cause the following to be defined:
- CONFIG_SYS_ARCH
- CONFIG_SYS_CPU
- CONFIG_SYS_BOARD
- CONFIG_SYS_VENDOR
- CONFIG_SYS_SOC
config NR_DRAM_BANKS
int "Number of DRAM banks"
default 1 if ARCH_SUNXI || ARCH_OWL
default 4
help
This defines the number of DRAM banks.
config SYS_BOOT_GET_CMDLINE
bool "Enable kernel command line setup"
help
Enables allocating and saving kernel cmdline in space between
"bootm_low" and "bootm_low" + BOOTMAPSZ.
config SYS_BARGSIZE
int "Size of kernel command line buffer in bytes"
depends on SYS_BOOT_GET_CMDLINE
default 512
help
Buffer size for Boot Arguments which are passed to the application
(usually a Linux kernel) when it is booted
config SYS_BOOT_GET_KBD
bool "Enable kernel board information setup"
help
Enables allocating and saving a kernel copy of the bd_info in
space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
config HAS_CUSTOM_SYS_INIT_SP_ADDR
bool "Use a custom location for the initial stack pointer address"
depends on ARC || (ARM && !INIT_SP_RELATIVE) || MIPS || PPC || RISCV
default y if TFABOOT
help
Typically, we use an initial stack pointer address that is calculated
by taking the statically defined CFG_SYS_INIT_RAM_ADDR, adding the
statically defined CFG_SYS_INIT_RAM_SIZE and then subtracting the
build-time constant of GENERATED_GBL_DATA_SIZE. On MIPS a different
but statica calculation is performed. However, some platforms will
take a different approach. Say Y here to define the address statically
instead.
config CUSTOM_SYS_INIT_SP_ADDR
hex "Static location for the initial stack pointer"
depends on HAS_CUSTOM_SYS_INIT_SP_ADDR
default TEXT_BASE if TFABOOT
config SYS_MALLOC_F
bool "Enable malloc() pool before relocation"
default y if DM
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SYS_MALLOC_F_LEN
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
default 0x400 if M68K || PPC || ROCKCHIP_PX30 || ROCKCHIP_RK3036 || \
ROCKCHIP_RK3308 || ROCKCHIP_RV1108
default 0x600 if ARCH_ZYNQMP_R5 || ARCH_ZYNQMP
default 0x800 if ARCH_ZYNQ || ROCKCHIP_RK3128 || ROCKCHIP_RK3188 || \
ROCKCHIP_RK322X || X86
default 0x1000 if ARCH_MESON || ARCH_BMIPS || ARCH_MTMIPS
default 0x1800 if ARCH_TEGRA
default 0x4000 if SANDBOX || RISCV || ARCH_APPLE || ROCKCHIP_RK3368 || \
ROCKCHIP_RK3399
default 0x8000 if RCAR_GEN3
default 0x10000 if ARCH_IMX8 || ARCH_IMX8M
default 0x2000
help
Size of the malloc() pool for use before relocation. If
this is defined, then a very simple malloc() implementation
will become available before relocation. The address is just
below the global data, and the stack is moved down to make
space.
This feature allocates regions with increasing addresses
within the region. calloc() is supported, but realloc()
is not available. free() is supported but does nothing.
The memory will be freed (or in fact just forgotten) when
U-Boot relocates itself.
config SYS_MALLOC_LEN
hex "Define memory for Dynamic allocation"
default 0x4000000 if SANDBOX
default 0x2000000 if ARCH_ROCKCHIP || ARCH_OMAP2PLUS || ARCH_MESON
default 0x200000 if ARCH_BMIPS || X86
default 0x4020000 if SUNXI_MINIMUM_DRAM_MB >= 256
default 0x220000 if SUNXI_MINIMUM_DRAM_MB >= 64
default 0x120000 if SUNXI_MINIMUM_DRAM_MB >= 32
default 0x400000
help
This defines memory to be allocated for Dynamic allocation
TODO: Use for other architectures
config SPL_SYS_MALLOC_F
bool "Enable malloc() pool in SPL"
depends on SPL_FRAMEWORK && SYS_MALLOC_F && SPL
default y
help
In SPL memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in SPL"
depends on SPL_SYS_MALLOC_F
default 0x2800 if RCAR_GEN3
default 0x2000 if IMX8MQ
default SYS_MALLOC_F_LEN
help
Sets the size of the malloc() pool in SPL. This is used for
driver model and other features, which must allocate memory for
data structures.
It is possible to enable CFG_SPL_SYS_MALLOC_START to start a new
malloc() region in SDRAM once it is inited.
config TPL_SYS_MALLOC_F
bool "Enable malloc() pool in TPL"
depends on SYS_MALLOC_F && TPL
default y if SPL_SYS_MALLOC_F
help
In TPL memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config TPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in TPL"
depends on TPL_SYS_MALLOC_F
default SPL_SYS_MALLOC_F_LEN
help
Sets the size of the malloc() pool in TPL. This is used for
driver model and other features, which must allocate memory for
data structures.
config VALGRIND
bool "Inform valgrind about memory allocations"
depends on !RISCV
help
Valgrind is an instrumentation framework for building dynamic analysis
tools. In particular, it may be used to detect memory management bugs
in U-Boot. It relies on knowing when heap blocks are allocated in
order to give accurate results. This happens automatically for
standard allocator functions provided by the host OS. However, this
doesn't automatically happen for U-Boot's malloc implementation.
Enable this option to annotate U-Boot's malloc implementation so that
it can be handled accurately by Valgrind. If you aren't planning on
using valgrind to debug U-Boot, say 'n'.
config VPL_SYS_MALLOC_F
bool "Enable malloc() pool in VPL"
depends on SYS_MALLOC_F && VPL
default y if SPL_SYS_MALLOC_F
help
In VPL memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config VPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in VPL before relocation"
depends on VPL_SYS_MALLOC_F
default SPL_SYS_MALLOC_F_LEN
help
Sets the size of the malloc() pool in VPL. This is used for
driver model and other features, which must allocate memory for
data structures.
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
help
This option allows certain base U-Boot options and settings
to be disabled or tweaked. This is for specialized
environments which can tolerate a "non-standard" U-Boot.
Use this only if you really know what you are doing.
if EXPERT
config SYS_MALLOC_CLEAR_ON_INIT
bool "Init with zeros the memory reserved for malloc (slow)"
default y
help
This setting is enabled by default. The reserved malloc
memory is initialized with zeros, so first malloc calls
will return the pointer to the zeroed memory. But this
slows the boot time.
It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN
value, has more than few MiB, e.g. when uses bzip2 or bmp logo.
Then the boot time can be significantly reduced.
Warning:
When disabling this, please check if malloc calls, maybe
should be replaced by calloc - if one expects zeroed memory.
config SPL_SYS_MALLOC_CLEAR_ON_INIT
bool "Init with zeros the memory reserved for malloc (slow) in SPL"
depends on SPL
default SYS_MALLOC_CLEAR_ON_INIT
help
Same as SYS_MALLOC_CLEAR_ON_INIT, but for SPL. It's possible to
Enable it without SYS_MALLOC_CLEAR_ON_INIT. It's useful for boards
that must have particular memory regions zero'ed before first use.
If SYS_SPL_MALLOC_START is configured to be in such region, this
option should be enabled.
config SYS_MALLOC_DEFAULT_TO_INIT
bool "Default malloc to init while reserving the memory for it"
help
It may happen that one needs to move the dynamic allocation
from one to another memory range, eg. when moving the malloc
from the limited static to a potentially large dynamic (DDR)
memory.
If so then on top of setting the updated memory aside one
needs to bring the malloc init.
If such a scenario is sought choose yes.
config TOOLS_DEBUG
bool "Enable debug information for tools"
help
Enable generation of debug information for tools such as mkimage.
This can be used for debugging purposes. With debug information
it is possible to set breakpoints on particular lines, single-step
debug through the source code, etc.
endif # EXPERT
config PHYS_64BIT
bool "64bit physical address support"
select FDT_64BIT
help
Say Y here to support 64bit physical memory address.
This can be used not only for 64bit SoCs, but also for
large physical address extension on 32bit SoCs.
config FDT_64BIT
bool "64bit fdt address support"
help
Say Y here to support 64bit fdt addresses.
This can be used not only for 64bit SoCs, but also
for large address extensions on 32bit SoCs.
config HAS_ROM
bool
select BINMAN
help
Enables building of a u-boot.rom target. This collects U-Boot and
any necessary binary blobs.
config SPL_IMAGE
string "SPL image used in the combined SPL+U-Boot image"
default "spl/boot.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "spl/u-boot-spl.bin"
depends on SPL
help
Select the SPL build target that shall be generated by the SPL
build process (default spl/u-boot-spl.bin). This image will be
used to generate a combined image with SPL and main U-Boot
proper as one single image.
config REMAKE_ELF
bool "Recreate an ELF image from raw U-Boot binary"
help
Enable this to recreate an ELF image (u-boot.elf) from the raw
U-Boot binary (u-boot.bin), which may already have been statically
relocated and may already have a device-tree appended to it.
config BUILD_TARGET
string "Build target special images"
default "u-boot-elf.srec" if RCAR_64
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
default "u-boot-with-spl.bin" if MPC85xx && !E500MC && !E5500 && !E6500 && SPL
default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
default "u-boot-with-spl.kwb" if ARMADA_32BIT && SPL
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
RISCV || ARCH_ZYNQMP)
default "u-boot.kwb" if (ARCH_KIRKWOOD || ARMADA_32BIT) && !SPL
help
Some SoCs need special image types (e.g. U-Boot binary
with a special header) as build targets. By defining
CONFIG_BUILD_TARGET in the SoC / board header, this
special image will be automatically built upon calling
make / buildman.
config HAS_BOARD_SIZE_LIMIT
bool "Define a maximum size for the U-Boot image"
default y if RCAR_32 || RCAR_64
help
In some cases, we need to enforce a hard limit on how big the U-Boot
image itself can be.
config BOARD_SIZE_LIMIT
int "Maximum size of the U-Boot image in bytes"
default 524288 if RCAR_32
default 1048576 if RCAR_64
depends on HAS_BOARD_SIZE_LIMIT
help
Maximum size of the U-Boot image. When defined, the build system
checks that the actual size does not exceed it. This does not
include SPL nor TPL, on platforms that use that functionality, they
have a separate option to restict size.
config SYS_CUSTOM_LDSCRIPT
bool "Use a custom location for the U-Boot linker script"
help
Normally when linking U-Boot we will look in the board directory,
the CPU directory and finally the "cpu" directory of the architecture
for the ile "u-boot.lds" and use that as our linker. However, in
some cases we need to provide a different linker script. To do so,
enable this option and then provide the location under
CONFIG_SYS_LDSCRIPT.
config SYS_LDSCRIPT
depends on SYS_CUSTOM_LDSCRIPT
string "Custom ldscript location"
help
Path within the source tree to the linker script to use for the
main U-Boot binary.
config SYS_LOAD_ADDR
hex "Address in memory to use by default"
default 0x01000000 if ARCH_SOCFPGA
default 0x02000000 if PPC || X86
default 0x81000000 if MACH_SUNIV
default 0x22000000 if MACH_SUN9I
default 0x42000000 if ARCH_SUNXI
default 0x82000000 if ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
default 0x82000000 if ARCH_MX6 && (MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
default 0x80800000 if ARCH_MX7
default 0x90000000 if FSL_LSCH2 || FSL_LSCH3
help
Address in memory to use as the default safe load address.
config ERR_PTR_OFFSET
hex
default 0x0
help
Some U-Boot pointers have redundant information, so we can use a
scheme where we can return either an error code or a pointer with the
same return value. The default implementation just casts the pointer
to a number, however, this may fail on platforms where the end of the
address range is used for valid pointers (e.g. 0xffffff00 is a valid
heap pointer in socfpga SPL).
For such platforms, this value provides an upper range of those error
pointer values - up to 'MAX_ERRNO' bytes below this value must be
unused/invalid addresses.
config PLATFORM_ELFENTRY
string
default "__start" if MIPS
default "_start"
config STACK_SIZE
hex "Define max stack size that can be used by U-Boot"
default 0x4000000 if ARCH_VERSAL_NET || ARCH_VERSAL || ARCH_ZYNQMP
default 0x200000 if MICROBLAZE
default 0x1000000
help
Define Max stack size that can be used by U-Boot. This value is used
by the UEFI sub-system. On some boards initrd_high is calculated as
base stack pointer minus this stack size.
config SYS_MEM_TOP_HIDE
hex "Exclude some memory from U-Boot / OS information"
default 0x0
help
If set, this specified memory area will get subtracted from the top
(end) of RAM and won't get "touched" at all by U-Boot. By fixing up
gd->ram_size the OS / next stage should gets passed the now
"corrected" memory size and won't touch it either.
WARNING: Please make sure that this value is a multiple of the OS
page size.
config SYS_HAS_SRAM
bool
default y if TARGET_PIC32MZDASK
default y if TARGET_DEVKIT8000
default y if TARGET_TRICORDER
help
Enable this to allow support for the on board SRAM.
SRAM base address is controlled by CONFIG_SYS_SRAM_BASE.
SRAM size is controlled by CONFIG_SYS_SRAM_SIZE.
config SYS_SRAM_BASE
hex
default 0x80000000 if TARGET_PIC32MZDASK
default 0x40200000 if TARGET_DEVKIT8000
default 0x40200000 if TARGET_TRICORDER
default 0x0
config SYS_SRAM_SIZE
hex
default 0x00080000 if TARGET_PIC32MZDASK
default 0x10000 if TARGET_DEVKIT8000
default 0x10000 if TARGET_TRICORDER
default 0x0
config SYS_MONITOR_LEN
int "Maximum size in bytes reserved for U-Boot in memory"
default 1048576 if X86
default 786432 if ARCH_SUNXI
default 0
help
Size of memory reserved for monitor code, used to determine
_at_compile_time_ (!) if the environment is embedded within the
U-Boot image, or in a separate flash sector, among other uses where
we need to set a maximum size of the U-Boot binary itself that will
be loaded.
config MP
bool "Support for multiprocessor"
help
This provides an option to bringup different processors
in multiprocessor cases.
config HAVE_TEXT_BASE
bool
depends on !NIOS2 && !XTENSA
depends on !EFI_APP
default y
config TEXT_BASE
depends on HAVE_TEXT_BASE
default 0x0 if POSITION_INDEPENDENT
default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3
default 0x81700000 if MACH_SUNIV
default 0x2a000000 if MACH_SUN9I
default 0x4a000000 if SUNXI_MINIMUM_DRAM_MB >= 256
default 0x42e00000 if SUNXI_MINIMUM_DRAM_MB >= 64
hex "Text Base"
help
The address in memory that U-Boot will be copied and executed from
initially.
config HAVE_SYS_UBOOT_START
bool "Use custom U-Boot Start"
depends on HAVE_TEXT_BASE
help
By default, the address in memory that U-Boot will be copied from
(TEXT_BASE) and the entry point are the same. Select this to start the
execution of U-Boot from a different address.
This may be required if a header or vector table needs to be copied
but not executed.
config SYS_UBOOT_START
hex
depends on HAVE_TEXT_BASE
default TEXT_BASE
prompt "U-Boot entry" if HAVE_SYS_UBOOT_START
help
If TEXT_BASE differs from the start of execution, this sets the
address in memory that U-Boot will start execution from initially.
config HAVE_SYS_MONITOR_BASE
bool
depends on ARC || MIPS || M68K || NIOS2 || PPC || XTENSA || X86 \
|| ENV_IS_IN_FLASH || MTD_NOR_FLASH
depends on !EFI_APP
default y
config SYS_MONITOR_BASE
depends on HAVE_SYS_MONITOR_BASE
hex "Physical start address of boot monitor code"
default TEXT_BASE
help
The physical start address of boot monitor code (which is the same as
CONFIG_TEXT_BASE when linking) and the same as CFG_SYS_FLASH_BASE
when booting from flash.
config SPL_SYS_MONITOR_BASE
depends on MPC85xx && SPL && HAVE_SYS_MONITOR_BASE
hex "Physical start address of SPL monitor code"
default SPL_TEXT_BASE
config TPL_SYS_MONITOR_BASE
depends on MPC85xx && TPL && HAVE_SYS_MONITOR_BASE
hex "Physical start address of TPL monitor code"
config DYNAMIC_SYS_CLK_FREQ
bool "Determine CPU clock frequency at run-time"
help
Implement a get_board_sys_clk function that will determine the CPU
clock frequency at run time, rather than define it statically.
config SYS_CLK_FREQ
depends on !DYNAMIC_SYS_CLK_FREQ
int "CPU clock frequency"
default 125000000 if ARCH_LS1012A
default 100000000 if ARCH_P2020 || ARCH_T1024 || ARCH_T1042 || \
ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
default 66666666 if ARCH_P1010 || ARCH_P1020 || ARCH_T4240
default 66660000 if ARCH_T2080
default 33333333 if RCAR_GEN3
default 24000000 if ARCH_EXYNOS
default 20000000 if RCAR_GEN2
default 0
help
A static value for the CPU frequency. Note that if not required
for a given SoC, this can be left at 0.
source "api/Kconfig"
endmenu # General setup
source "boot/Kconfig"
source "common/Kconfig"
source "cmd/Kconfig"
source "disk/Kconfig"
source "dts/Kconfig"
source "env/Kconfig"
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "lib/Kconfig"
source "test/Kconfig"
source "tools/Kconfig"