| CONFIG_ARM=y | |
| CONFIG_SYS_L2CACHE_OFF=y | |
| CONFIG_ARCH_TEGRA=y | |
| CONFIG_TEXT_BASE=0x00110000 | |
| CONFIG_NR_DRAM_BANKS=2 | |
| CONFIG_ENV_SIZE=0x2000 | |
| CONFIG_ENV_OFFSET=0xFFFFE000 | |
| CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" | |
| CONFIG_SPL_STACK=0xffffc | |
| CONFIG_SPL_TEXT_BASE=0x00108000 | |
| CONFIG_SYS_LOAD_ADDR=0x1000000 | |
| CONFIG_TEGRA20=y | |
| CONFIG_TARGET_SEABOARD=y | |
| CONFIG_TEGRA_ENABLE_UARTD=y | |
| CONFIG_OF_SYSTEM_SETUP=y | |
| CONFIG_USE_PREBOOT=y | |
| CONFIG_SYS_PBSIZE=2086 | |
| CONFIG_SPL_FOOTPRINT_LIMIT=y | |
| CONFIG_SPL_MAX_FOOTPRINT=0x8000 | |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set | |
| CONFIG_SPL_HAVE_INIT_STACK=y | |
| CONFIG_SPL_SYS_MALLOC=y | |
| CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y | |
| CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 | |
| CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 | |
| CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " | |
| # CONFIG_CMD_IMI is not set | |
| CONFIG_CMD_GPIO=y | |
| CONFIG_CMD_I2C=y | |
| CONFIG_CMD_MMC=y | |
| CONFIG_CMD_USB=y | |
| # CONFIG_CMD_SETEXPR is not set | |
| CONFIG_CMD_PMIC=y | |
| CONFIG_CMD_REGULATOR=y | |
| CONFIG_CMD_EXT4_WRITE=y | |
| # CONFIG_SPL_DOS_PARTITION is not set | |
| # CONFIG_SPL_EFI_PARTITION is not set | |
| CONFIG_ENV_OVERWRITE=y | |
| CONFIG_ENV_IS_IN_MMC=y | |
| CONFIG_ENV_RELOC_GD_ENV_ADDR=y | |
| CONFIG_ENV_MMC_EMMC_HW_PARTITION=2 | |
| CONFIG_SYS_I2C_TEGRA=y | |
| CONFIG_TEGRA_KEYBOARD=y | |
| CONFIG_MTD_RAW_NAND=y | |
| CONFIG_TEGRA_NAND=y | |
| CONFIG_SYS_NAND_ONFI_DETECTION=y | |
| CONFIG_DM_PMIC=y | |
| CONFIG_DM_REGULATOR=y | |
| CONFIG_DM_REGULATOR_FIXED=y | |
| CONFIG_TPS6586X_POWER=y | |
| CONFIG_PWM_TEGRA=y | |
| CONFIG_SYS_NS16550=y | |
| CONFIG_USB=y | |
| CONFIG_USB_EHCI_HCD=y | |
| CONFIG_USB_EHCI_TEGRA=y | |
| CONFIG_USB_ULPI=y | |
| CONFIG_USB_KEYBOARD=y | |
| CONFIG_USB_HOST_ETHER=y | |
| CONFIG_USB_ETHER_ASIX=y | |
| CONFIG_VIDEO=y | |
| # CONFIG_VIDEO_BPP8 is not set | |
| CONFIG_VIDEO_TEGRA=y | |
| CONFIG_CONSOLE_SCROLL_LINES=10 |