blob: e67e09e31e4af8a21296f8b30084ea5507c5588f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015,2016 Freescale Semiconductor, Inc.
*
* FSL USB HOST xHCI Controller
*
* Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
*/
#include <common.h>
#include <log.h>
#include <usb.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include <linux/usb/xhci-fsl.h>
#include <linux/usb/dwc3.h>
#include <usb/xhci.h>
#include <fsl_errata.h>
#include <fsl_usb.h>
#include <dm.h>
/* Declare global data pointer */
struct xhci_fsl_priv {
struct xhci_ctrl xhci;
fdt_addr_t hcd_base;
struct fsl_xhci ctx;
};
__weak int __board_usb_init(int index, enum usb_init_type init)
{
return 0;
}
static int erratum_a008751(void)
{
#if defined(CONFIG_TARGET_LS2080AQDS) || defined(CONFIG_TARGET_LS2080ARDB) ||\
defined(CONFIG_TARGET_LS2080AQDS)
u32 __iomem *scfg = (u32 __iomem *)SCFG_BASE;
writel(SCFG_USB3PRM1CR_INIT, scfg + SCFG_USB3PRM1CR / 4);
return 0;
#endif
return 1;
}
static void fsl_apply_xhci_errata(void)
{
int ret;
if (has_erratum_a008751()) {
ret = erratum_a008751();
if (ret != 0)
puts("Failed to apply erratum a008751\n");
}
}
static void fsl_xhci_set_beat_burst_length(struct dwc3 *dwc3_reg)
{
clrsetbits_le32(&dwc3_reg->g_sbuscfg0, USB3_ENABLE_BEAT_BURST_MASK,
USB3_ENABLE_BEAT_BURST);
setbits_le32(&dwc3_reg->g_sbuscfg1, USB3_SET_BEAT_BURST_LIMIT);
}
static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci)
{
int ret = 0;
ret = dwc3_core_init(fsl_xhci->dwc3_reg);
if (ret) {
debug("%s:failed to initialize core\n", __func__);
return ret;
}
/* We are hard-coding DWC3 core to Host Mode */
dwc3_set_mode(fsl_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
/* Set GFLADJ_30MHZ as 20h as per XHCI spec default value */
dwc3_set_fladj(fsl_xhci->dwc3_reg, GFLADJ_30MHZ_DEFAULT);
/* Change beat burst and outstanding pipelined transfers requests */
fsl_xhci_set_beat_burst_length(fsl_xhci->dwc3_reg);
/*
* A-010151: The dwc3 phy TSMC 28-nm HPM 0.9/1.8 V does not
* reliably support Rx Detect in P3 mode(P3 is the default
* setting). Therefore, some USB3.0 devices may not be detected
* reliably in Super Speed mode. So, USB controller to configure
* USB in P2 mode whenever the Receive Detect feature is required.
* whenever the Receive Detect feature is required.
*/
if (has_erratum_a010151())
clrsetbits_le32(&fsl_xhci->dwc3_reg->g_usb3pipectl[0],
DWC3_GUSB3PIPECTL_DISRXDETP3,
DWC3_GUSB3PIPECTL_DISRXDETP3);
return ret;
}
static int fsl_xhci_core_exit(struct fsl_xhci *fsl_xhci)
{
/*
* Currently fsl socs do not support PHY shutdown from
* sw. But this support may be added in future socs.
*/
return 0;
}
static int xhci_fsl_probe(struct udevice *dev)
{
struct xhci_fsl_priv *priv = dev_get_priv(dev);
struct xhci_hccr *hccr;
struct xhci_hcor *hcor;
int ret = 0;
/*
* Get the base address for XHCI controller from the device node
*/
priv->hcd_base = dev_read_addr(dev);
if (priv->hcd_base == FDT_ADDR_T_NONE) {
debug("Can't get the XHCI register base address\n");
return -ENXIO;
}
priv->ctx.hcd = (struct xhci_hccr *)priv->hcd_base;
priv->ctx.dwc3_reg = (struct dwc3 *)((char *)(priv->hcd_base) +
DWC3_REG_OFFSET);
fsl_apply_xhci_errata();
ret = fsl_xhci_core_init(&priv->ctx);
if (ret < 0) {
puts("Failed to initialize xhci\n");
return ret;
}
hccr = (struct xhci_hccr *)(priv->ctx.hcd);
hcor = (struct xhci_hcor *)((uintptr_t) hccr
+ HC_LENGTH(xhci_readl(&hccr->cr_capbase)));
debug("xhci-fsl: init hccr %lx and hcor %lx hc_length %lx\n",
(uintptr_t)hccr, (uintptr_t)hcor,
(uintptr_t)HC_LENGTH(xhci_readl(&hccr->cr_capbase)));
return xhci_register(dev, hccr, hcor);
}
static int xhci_fsl_remove(struct udevice *dev)
{
struct xhci_fsl_priv *priv = dev_get_priv(dev);
fsl_xhci_core_exit(&priv->ctx);
return xhci_deregister(dev);
}
static const struct udevice_id xhci_usb_ids[] = {
{ .compatible = "fsl,layerscape-dwc3", },
{ .compatible = "fsl,ls1028a-dwc3", },
{ }
};
U_BOOT_DRIVER(xhci_fsl) = {
.name = "xhci_fsl",
.id = UCLASS_USB,
.of_match = xhci_usb_ids,
.probe = xhci_fsl_probe,
.remove = xhci_fsl_remove,
.ops = &xhci_usb_ops,
.plat_auto = sizeof(struct usb_plat),
.priv_auto = sizeof(struct xhci_fsl_priv),
.flags = DM_FLAG_ALLOC_PRIV_DMA,
};