| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2007-2008 |
| * Stelian Pop <stelian@popies.net> |
| * Lead Tech Design <www.leadtechdesign.com> |
| * |
| * (C) Copyright 2010 |
| * Achim Ehrlich <aehrlich@taskit.de> |
| * taskit GmbH <www.taskit.de> |
| * |
| * (C) Copyright 2012 |
| * Markus Hubig <mhubig@imko.de> |
| * IMKO GmbH <www.imko.de> |
| * |
| * (C) Copyright 2014 |
| * Heiko Schocher <hs@denx.de> |
| * DENX Software Engineering GmbH |
| * |
| * Configuation settings for the smartweb. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * SoC must be defined first, before hardware.h is included. |
| * In this case SoC is defined in boards.cfg. |
| */ |
| #include <asm/hardware.h> |
| #include <linux/sizes.h> |
| |
| /* |
| * Warning: changing CONFIG_TEXT_BASE requires adapting the initial boot |
| * program. Since the linker has to swallow that define, we must use a pure |
| * hex number here! |
| */ |
| |
| /* ARM asynchronous clock */ |
| #define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ |
| #define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ |
| |
| /* misc settings */ |
| |
| /* |
| * SDRAM: 1 bank, 64 MB, base address 0x20000000 |
| * Already initialized before u-boot gets started. |
| */ |
| #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1 |
| #define CFG_SYS_SDRAM_SIZE (64 * SZ_1M) |
| |
| /* |
| * Perform a SDRAM Memtest from the start of SDRAM |
| * till the beginning of the U-Boot position in RAM. |
| */ |
| |
| /* NAND flash settings */ |
| #define CFG_SYS_NAND_BASE ATMEL_BASE_CS3 |
| #define CFG_SYS_NAND_MASK_ALE (1 << 21) |
| #define CFG_SYS_NAND_MASK_CLE (1 << 22) |
| #define CFG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 |
| #define CFG_SYS_NAND_READY_PIN AT91_PIN_PC13 |
| |
| /* serial console */ |
| #define CFG_USART_BASE ATMEL_BASE_DBGU |
| #define CFG_USART_ID ATMEL_ID_SYS |
| |
| /* DFU class support */ |
| #define DFU_MANIFEST_POLL_TIMEOUT 25000 |
| |
| /* General Boot Parameter */ |
| |
| /* |
| * Predefined environment variables. |
| * Usefull to define some easy to use boot commands. |
| */ |
| #define CFG_EXTRA_ENV_SETTINGS \ |
| \ |
| "basicargs=console=ttyS0,115200\0" \ |
| \ |
| |
| /* |
| * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, |
| * leaving the correct space for initial global data structure above that |
| * address while providing maximum stack area below. |
| */ |
| #define CFG_SYS_INIT_RAM_SIZE 0x1000 |
| #define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 |
| |
| /* Defines for SPL */ |
| |
| #define CFG_SYS_NAND_U_BOOT_SIZE SZ_512K |
| #define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE |
| #define CFG_SYS_NAND_U_BOOT_DST CONFIG_TEXT_BASE |
| |
| #define CFG_SYS_NAND_ECCSIZE 256 |
| #define CFG_SYS_NAND_ECCBYTES 3 |
| #define CFG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ |
| 48, 49, 50, 51, 52, 53, 54, 55, \ |
| 56, 57, 58, 59, 60, 61, 62, 63, } |
| |
| #define CFG_SYS_MASTER_CLOCK (198656000/2) |
| #define AT91_PLL_LOCK_TIMEOUT 1000000 |
| #define CFG_SYS_AT91_PLLA 0x2060bf09 |
| #define CFG_SYS_MCKR 0x100 |
| #define CFG_SYS_MCKR_CSS (0x02 | CFG_SYS_MCKR) |
| #define CFG_SYS_AT91_PLLB 0x10483f0e |
| |
| #endif /* __CONFIG_H */ |
