blob: 5eca9386f6eb38c41e06713d84dd00341e2c300b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <net.h>
#include <netdev.h>
#include <asm/fsl_serdes.h>
#include <asm/immap_85xx.h>
#include <fm_eth.h>
#include <fsl_mdio.h>
#include <malloc.h>
#include <fsl_dtsec.h>
#include <vsc9953.h>
#include "../common/fman.h"
int board_eth_init(struct bd_info *bis)
{
#ifdef CONFIG_FMAN_ENET
struct memac_mdio_info memac_mdio_info;
unsigned int i;
int phy_addr = 0;
printf("Initializing Fman\n");
memac_mdio_info.regs =
(struct memac_mdio_controller *)CFG_SYS_FM1_DTSEC_MDIO_ADDR;
memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
/* Register the real 1G MDIO bus */
fm_memac_mdio_init(bis, &memac_mdio_info);
/*
* Program on board RGMII, SGMII PHY addresses.
*/
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CFG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
#ifdef CONFIG_TARGET_T1042D4RDB
case PHY_INTERFACE_MODE_SGMII:
/* T1042D4RDB supports SGMII on DTSEC1, DTSEC2
* & DTSEC3
*/
if (FM1_DTSEC1 == i)
phy_addr = CFG_SYS_SGMII1_PHY_ADDR;
if (FM1_DTSEC2 == i)
phy_addr = CFG_SYS_SGMII2_PHY_ADDR;
if (FM1_DTSEC3 == i)
phy_addr = CFG_SYS_SGMII3_PHY_ADDR;
fm_info_set_phy_address(i, phy_addr);
break;
#endif
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_ID:
if (FM1_DTSEC4 == i)
phy_addr = CFG_SYS_RGMII1_PHY_ADDR;
if (FM1_DTSEC5 == i)
phy_addr = CFG_SYS_RGMII2_PHY_ADDR;
fm_info_set_phy_address(i, phy_addr);
break;
case PHY_INTERFACE_MODE_QSGMII:
fm_info_set_phy_address(i, 0);
break;
case PHY_INTERFACE_MODE_NA:
fm_info_set_phy_address(i, 0);
break;
default:
printf("Fman1: DTSEC%u set to unknown interface %i\n",
idx + 1, fm_info_get_enet_if(i));
fm_info_set_phy_address(i, 0);
break;
}
if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII ||
fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NA)
fm_info_set_mdio(i, NULL);
else
fm_info_set_mdio(i,
miiphy_get_dev_by_name(
DEFAULT_FM_MDIO_NAME));
}
cpu_eth_init(bis);
#endif
return pci_eth_init(bis);
}