blob: fbcf845e87ddbf4684eb508ae3ad15c233c9ffeb [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 Google
*/
#include <common.h>
#include <dm.h>
#include <init.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/grf_rk3399.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/misc.h>
#define GRF_IO_VSEL_BT656_SHIFT 0
#define GRF_IO_VSEL_AUDIO_SHIFT 1
#define PMUGRF_CON0_VSEL_SHIFT 8
#define PMUGRF_CON0_VOL_SHIFT 9
#ifdef CONFIG_SPL_BUILD
/* provided to defeat compiler optimisation in board_init_f() */
void gru_dummy_function(int i)
{
}
int board_early_init_f(void)
{
# if defined(CONFIG_TARGET_CHROMEBOOK_BOB) || defined(CONFIG_TARGET_CHROMEBOOK_KEVIN)
int sum, i;
/*
* Add a delay and ensure that the compiler does not optimise this out.
* This is needed since the power rails tail a while to turn on, and
* we get garbage serial output otherwise.
*/
sum = 0;
for (i = 0; i < 150000; i++)
sum += i;
gru_dummy_function(sum);
#endif /* CONFIG_TARGET_CHROMEBOOK_BOB */
return 0;
}
#endif
#ifndef CONFIG_SPL_BUILD
int board_early_init_r(void)
{
struct udevice *clk;
int ret;
/*
* This init is done in SPL, but when chain-loading U-Boot SPL will
* have been skipped. Allow the clock driver to check if it needs
* setting up.
*/
ret = uclass_get_device_by_driver(UCLASS_CLK,
DM_DRIVER_GET(clk_rk3399), &clk);
if (ret) {
debug("%s: CLK init failed: %d\n", __func__, ret);
return ret;
}
return 0;
}
#endif
static void setup_iodomain(void)
{
struct rk3399_grf_regs *grf =
syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
struct rk3399_pmugrf_regs *pmugrf =
syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
/* BT656 and audio is in 1.8v domain */
rk_setreg(&grf->io_vsel, (1 << GRF_IO_VSEL_BT656_SHIFT |
1 << GRF_IO_VSEL_AUDIO_SHIFT));
/*
* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL
* and explicitly configure that PMU1830_VOL to be 1.8V
*/
rk_setreg(&pmugrf->soc_con0, (1 << PMUGRF_CON0_VSEL_SHIFT |
1 << PMUGRF_CON0_VOL_SHIFT));
}
int misc_init_r(void)
{
const u32 cpuid_offset = 0x7;
const u32 cpuid_length = 0x10;
u8 cpuid[cpuid_length];
int ret;
setup_iodomain();
ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
if (ret)
return ret;
ret = rockchip_cpuid_set(cpuid, cpuid_length);
if (ret)
return ret;
ret = rockchip_setup_macaddr();
return ret;
}