blob: 382b668fbec6bf4e33ececfed113d45bdcc9ce65 [file] [log] [blame]
Overview
--------
QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development
platform, with a complete debugging environment. The LS1012AFRDM board
supports the QorIQ LS1012A processor and is optimized to support the
high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports.
LS1012A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
SoC overview.
LS1012AFRDM board Overview
-----------------------
- SERDES Connections, 2 lanes supportingspeeds upto 1 Gbit/s
- 2 SGMII 1G PHYs
- DDR Controller
- 4 Gb DDR3L SDRAM memory, running at data rates up to 1 GT/s
operating at 1.35 V
- QSPI
- Onboard 512 Mbit QSPI flash memory running at speed up
to 108/54 MHz
- One high-speed USB 2.0/3.0 port, one USB 2.0 port
- USB 2.0/3.0 port is configured as On-The-Go (OTG) with a
Micro-AB connector.
- USB 2.0 port is a debug port (CMSIS DAP) and is configured
as a Micro-AB device.
- I2C controller
- One I2C bus with connectivity to Arduino headers
- UART
- UART (Console): UART1 (Without flow control) for console
- ARM JTAG support
- ARM Cortex® 10-pin JTAG connector for LS1012A
- CMSIS DAP through K20 microcontroller
- SAI Audio interface
- One SAI port, SAI 2 with full duplex support
- Clocks
- 25 MHz crystal for LS1012A
- 8 MHz Crystal for K20
- 24 MHz for SC16IS740IPW SPI to Dual UART bridge
- Power Supplies
- 5 V input supply from USB
- 0.9 V, 1.35 V, and 1.8 V for VDD/Core, DDR, I/O, and
other board interfaces
Booting Options
---------------
QSPI Flash 1
QSPI flash map
--------------
Images | Size |QSPI Flash Address
------------------------------------------
RCW + PBI | 1MB | 0x4000_0000
U-boot | 1MB | 0x4010_0000
U-boot Env | 1MB | 0x4020_0000
PPA FIT image | 2MB | 0x4050_0000
Linux ITB | ~53MB | 0x40A0_0000