| CONFIG_ARM=y |
| CONFIG_COUNTER_FREQUENCY=25000000 |
| CONFIG_TARGET_SL28=y |
| CONFIG_SYS_MALLOC_LEN=0x202000 |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y |
| CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x1800eff0 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0x3e0000 |
| CONFIG_ENV_SECT_SIZE=0x10000 |
| CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-kontron-sl28" |
| CONFIG_SPL_TEXT_BASE=0x18010000 |
| CONFIG_SYS_FSL_SDHC_CLK_DIV=1 |
| CONFIG_OF_LIBFDT_OVERLAY=y |
| CONFIG_SYS_MONITOR_LEN=1048576 |
| CONFIG_SPL_MMC=y |
| CONFIG_SPL_SERIAL=y |
| CONFIG_SPL_STACK=0x18009ff0 |
| CONFIG_SPL_SIZE_LIMIT=0x20000 |
| CONFIG_SPL=y |
| CONFIG_ENV_OFFSET_REDUND=0x3f0000 |
| CONFIG_SPL_SPI_FLASH_SUPPORT=y |
| CONFIG_SPL_SPI=y |
| # CONFIG_PSCI_RESET is not set |
| CONFIG_ARMV8_PSCI=y |
| CONFIG_ARMV8_PSCI_RELOCATE=y |
| CONFIG_SYS_LOAD_ADDR=0x82000000 |
| CONFIG_AHCI=y |
| CONFIG_SYS_FSL_NUM_CC_PLLS=3 |
| CONFIG_MP=y |
| CONFIG_FIT=y |
| CONFIG_SPL_LOAD_FIT=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_BOOTDELAY=10 |
| CONFIG_OF_BOARD_SETUP=y |
| CONFIG_OF_STDOUT_VIA_ALIAS=y |
| CONFIG_USE_BOOTARGS=y |
| CONFIG_BOARD_LATE_INIT=y |
| # CONFIG_HWCONFIG is not set |
| CONFIG_PCI_INIT_R=y |
| CONFIG_SPL_MAX_SIZE=0x20000 |
| CONFIG_SPL_HAS_BSS_LINKER_SECTION=y |
| CONFIG_SPL_BSS_START_ADDR=0x80100000 |
| CONFIG_SPL_BSS_MAX_SIZE=0x100000 |
| CONFIG_SPL_BOARD_INIT=y |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_SYS_MALLOC=y |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y |
| CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x900 |
| CONFIG_SPL_MPC8XXX_INIT_DDR=y |
| CONFIG_SPL_SPI_LOAD=y |
| CONFIG_CMDLINE_PS_SUPPORT=y |
| CONFIG_SYS_CBSIZE=256 |
| CONFIG_SYS_PBSIZE=276 |
| CONFIG_SYS_BOOTM_LEN=0x800000 |
| CONFIG_CMD_ASKENV=y |
| CONFIG_CMD_GREPENV=y |
| CONFIG_CMD_NVEDIT_EFI=y |
| CONFIG_CMD_DFU=y |
| CONFIG_CMD_DM=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_GPT=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_PCI=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_USB_MASS_STORAGE=y |
| CONFIG_CMD_WDT=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EFIDEBUG=y |
| CONFIG_CMD_RNG=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_OF_LIST="fsl-ls1028a-kontron-sl28 fsl-ls1028a-kontron-sl28-var1 fsl-ls1028a-kontron-sl28-var2 fsl-ls1028a-kontron-sl28-var3 fsl-ls1028a-kontron-sl28-var4" |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_SPI_FLASH=y |
| CONFIG_SYS_REDUNDAND_ENVIRONMENT=y |
| CONFIG_SYS_RX_ETH_BUFFER=8 |
| CONFIG_SPL_DM_SEQ_ALIAS=y |
| CONFIG_SATA=y |
| CONFIG_SCSI_AHCI=y |
| CONFIG_SATA_CEVA=y |
| CONFIG_FSL_CAAM=y |
| CONFIG_SYS_FSL_DDR3=y |
| CONFIG_DDR_ECC=y |
| CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y |
| CONFIG_DFU_MMC=y |
| CONFIG_DFU_SF=y |
| CONFIG_SL28CPLD_GPIO=y |
| CONFIG_I2C_SET_DEFAULT_BUS_NUM=y |
| CONFIG_I2C_MUX=y |
| CONFIG_SL28CPLD=y |
| CONFIG_MMC_HS400_SUPPORT=y |
| CONFIG_FSL_ESDHC=y |
| CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y |
| # CONFIG_SPI_FLASH_UNLOCK_ALL is not set |
| CONFIG_SPI_FLASH_WINBOND=y |
| # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
| CONFIG_PHYLIB=y |
| CONFIG_PHY_ATHEROS=y |
| CONFIG_PHY_FIXED=y |
| CONFIG_DM_DSA=y |
| CONFIG_PHY_GIGE=y |
| CONFIG_E1000=y |
| CONFIG_MSCC_FELIX_SWITCH=y |
| CONFIG_NVME_PCI=y |
| CONFIG_PCIE_ECAM_GENERIC=y |
| CONFIG_PCIE_LAYERSCAPE_RC=y |
| CONFIG_RTC_RV8803=y |
| CONFIG_SCSI=y |
| CONFIG_SYS_NS16550=y |
| CONFIG_SPI=y |
| CONFIG_FSL_DSPI=y |
| CONFIG_NXP_FSPI=y |
| CONFIG_USB=y |
| # CONFIG_SPL_DM_USB is not set |
| CONFIG_DM_USB_GADGET=y |
| CONFIG_USB_XHCI_HCD=y |
| # CONFIG_USB_XHCI_FSL is not set |
| CONFIG_USB_DWC3=y |
| CONFIG_USB_DWC3_LAYERSCAPE=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_DOWNLOAD=y |
| # CONFIG_WATCHDOG is not set |
| # CONFIG_WATCHDOG_AUTOSTART is not set |
| CONFIG_WDT=y |
| CONFIG_WDT_SL28CPLD=y |
| CONFIG_WDT_SP805=y |
| CONFIG_EFI_SET_TIME=y |
| CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y |
| CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y |
