| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * sys_info.c |
| * |
| * System information functions |
| * |
| * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ |
| * |
| * Derived from Beagle Board and 3430 SDP code by |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <khasim@ti.com> |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <asm/io.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/clock.h> |
| #include <power/tps65910.h> |
| #include <linux/compiler.h> |
| |
| struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; |
| |
| /** |
| * get_cpu_rev(void) - extract rev info |
| */ |
| u32 get_cpu_rev(void) |
| { |
| u32 id; |
| u32 rev; |
| |
| id = readl(DEVICE_ID); |
| rev = (id >> 28) & 0xff; |
| |
| return rev; |
| } |
| |
| /** |
| * get_cpu_type(void) - extract cpu info |
| */ |
| u32 get_cpu_type(void) |
| { |
| u32 id = 0; |
| u32 partnum; |
| |
| id = readl(DEVICE_ID); |
| partnum = (id >> 12) & 0xffff; |
| |
| return partnum; |
| } |
| |
| /** |
| * get_sysboot_value(void) - return SYS_BOOT[4:0] |
| */ |
| u32 get_sysboot_value(void) |
| { |
| return readl(&cstat->statusreg) & SYSBOOT_MASK; |
| } |
| |
| u32 get_sys_clk_index(void) |
| { |
| struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE; |
| u32 ind = readl(&ctrl->statusreg); |
| |
| #ifdef CONFIG_AM43XX |
| u32 src; |
| src = (ind & CTRL_CRYSTAL_FREQ_SRC_MASK) >> CTRL_CRYSTAL_FREQ_SRC_SHIFT; |
| if (src == CTRL_CRYSTAL_FREQ_SRC_EFUSE) /* Value read from EFUSE */ |
| return ((ind & CTRL_CRYSTAL_FREQ_SELECTION_MASK) >> |
| CTRL_CRYSTAL_FREQ_SELECTION_SHIFT); |
| else /* Value read from SYS BOOT pins */ |
| #endif |
| return ((ind & CTRL_SYSBOOT_15_14_MASK) >> |
| CTRL_SYSBOOT_15_14_SHIFT); |
| } |
| |
| |
| #ifdef CONFIG_DISPLAY_CPUINFO |
| static char *cpu_revs[] = { |
| "1.0", |
| "2.0", |
| "2.1"}; |
| |
| static char *cpu_revs_am43xx[] = { |
| "1.0", |
| "1.1", |
| "1.2"}; |
| |
| static char *dev_types[] = { |
| "TST", |
| "EMU", |
| "HS", |
| "GP"}; |
| |
| /** |
| * Print CPU information |
| */ |
| int print_cpuinfo(void) |
| { |
| char *cpu_s, *sec_s, *rev_s; |
| char **cpu_rev_arr = cpu_revs; |
| |
| switch (get_cpu_type()) { |
| case AM335X: |
| cpu_s = "AM335X"; |
| break; |
| case TI81XX: |
| cpu_s = "TI81XX"; |
| break; |
| case AM437X: |
| cpu_s = "AM437X"; |
| cpu_rev_arr = cpu_revs_am43xx; |
| break; |
| default: |
| cpu_s = "Unknown CPU type"; |
| break; |
| } |
| |
| if (get_cpu_rev() < ARRAY_SIZE(cpu_revs)) |
| rev_s = cpu_rev_arr[get_cpu_rev()]; |
| else |
| rev_s = "?"; |
| |
| if (get_device_type() < ARRAY_SIZE(dev_types)) |
| sec_s = dev_types[get_device_type()]; |
| else |
| sec_s = "?"; |
| |
| printf("CPU : %s-%s rev %s\n", cpu_s, sec_s, rev_s); |
| |
| return 0; |
| } |
| #endif /* CONFIG_DISPLAY_CPUINFO */ |
| |
| #ifdef CONFIG_AM33XX |
| int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev) |
| { |
| int sil_rev; |
| |
| sil_rev = readl(&cdev->deviceid) >> 28; |
| |
| if (sil_rev == 0) { |
| /* No efuse in PG 1.0. Use max speed */ |
| return MPUPLL_M_720; |
| } else if (sil_rev >= 1) { |
| /* Check what the efuse says our max speed is. */ |
| int efuse_arm_mpu_max_freq, package_type; |
| efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma); |
| package_type = (efuse_arm_mpu_max_freq & PACKAGE_TYPE_MASK) >> |
| PACKAGE_TYPE_SHIFT; |
| |
| /* PG 2.0, efuse may not be set. */ |
| if (package_type == PACKAGE_TYPE_UNDEFINED || package_type == |
| PACKAGE_TYPE_RESERVED) |
| return MPUPLL_M_800; |
| |
| switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) { |
| case AM335X_ZCZ_1000: |
| return MPUPLL_M_1000; |
| case AM335X_ZCZ_800: |
| return MPUPLL_M_800; |
| case AM335X_ZCZ_720: |
| return MPUPLL_M_720; |
| case AM335X_ZCZ_600: |
| case AM335X_ZCE_600: |
| return MPUPLL_M_600; |
| case AM335X_ZCZ_300: |
| case AM335X_ZCE_300: |
| return MPUPLL_M_300; |
| } |
| } |
| |
| /* unknown, use the PG1.0 max */ |
| return MPUPLL_M_720; |
| } |
| |
| int am335x_get_mpu_vdd(int sil_rev, int frequency) |
| { |
| int sel_mask = am335x_get_tps65910_mpu_vdd(sil_rev, frequency); |
| |
| switch (sel_mask) { |
| case TPS65910_OP_REG_SEL_1_3_2_5: |
| return 1325000; |
| case TPS65910_OP_REG_SEL_1_2_0: |
| return 1200000; |
| case TPS65910_OP_REG_SEL_1_1_0: |
| return 1100000; |
| default: |
| return 1262500; |
| } |
| } |
| |
| int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency) |
| { |
| /* For PG2.0 and later, we have one set of values. */ |
| if (sil_rev >= 1) { |
| switch (frequency) { |
| case MPUPLL_M_1000: |
| return TPS65910_OP_REG_SEL_1_3_2_5; |
| case MPUPLL_M_800: |
| return TPS65910_OP_REG_SEL_1_2_6; |
| case MPUPLL_M_720: |
| return TPS65910_OP_REG_SEL_1_2_0; |
| case MPUPLL_M_600: |
| case MPUPLL_M_500: |
| case MPUPLL_M_300: |
| return TPS65910_OP_REG_SEL_1_1_0; |
| } |
| } |
| |
| /* Default to PG1.0 values. */ |
| return TPS65910_OP_REG_SEL_1_2_6; |
| } |
| #endif |