| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * |
| * based on: cmd_jffs2.c |
| * |
| * Add support for a CRAMFS located in RAM |
| */ |
| |
| |
| /* |
| * CRAMFS support |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <env.h> |
| #include <image.h> |
| #include <malloc.h> |
| #include <mapmem.h> |
| #include <linux/list.h> |
| #include <linux/ctype.h> |
| #include <jffs2/jffs2.h> |
| #include <jffs2/load_kernel.h> |
| #include <cramfs/cramfs_fs.h> |
| #include <asm/io.h> |
| |
| /* enable/disable debugging messages */ |
| #define DEBUG_CRAMFS |
| #undef DEBUG_CRAMFS |
| |
| #ifdef DEBUG_CRAMFS |
| # define DEBUGF(fmt, args...) printf(fmt ,##args) |
| #else |
| # define DEBUGF(fmt, args...) |
| #endif |
| |
| |
| #ifndef CONFIG_MTD_NOR_FLASH |
| # define OFFSET_ADJUSTMENT 0 |
| #else |
| #include <flash.h> |
| # define OFFSET_ADJUSTMENT (flash_info[id.num].start[0]) |
| #endif |
| |
| #ifndef CONFIG_FS_JFFS2 |
| #include <linux/stat.h> |
| char *mkmodestr(unsigned long mode, char *str) |
| { |
| static const char *l = "xwr"; |
| int mask = 1, i; |
| char c; |
| |
| switch (mode & S_IFMT) { |
| case S_IFDIR: str[0] = 'd'; break; |
| case S_IFBLK: str[0] = 'b'; break; |
| case S_IFCHR: str[0] = 'c'; break; |
| case S_IFIFO: str[0] = 'f'; break; |
| case S_IFLNK: str[0] = 'l'; break; |
| case S_IFSOCK: str[0] = 's'; break; |
| case S_IFREG: str[0] = '-'; break; |
| default: str[0] = '?'; |
| } |
| |
| for(i = 0; i < 9; i++) { |
| c = l[i%3]; |
| str[9-i] = (mode & mask)?c:'-'; |
| mask = mask<<1; |
| } |
| |
| if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S'; |
| if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S'; |
| if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T'; |
| str[10] = '\0'; |
| return str; |
| } |
| #endif /* CONFIG_FS_JFFS2 */ |
| |
| extern int cramfs_check (struct part_info *info); |
| extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename); |
| extern int cramfs_ls (struct part_info *info, char *filename); |
| extern int cramfs_info (struct part_info *info); |
| |
| /***************************************************/ |
| /* U-Boot commands */ |
| /***************************************************/ |
| |
| /** |
| * Routine implementing fsload u-boot command. This routine tries to load |
| * a requested file from cramfs filesystem at location 'cramfsaddr'. |
| * cramfsaddr is an evironment variable. |
| * |
| * @param cmdtp command internal data |
| * @param flag command flag |
| * @param argc number of arguments supplied to the command |
| * @param argv arguments list |
| * Return: 0 on success, 1 otherwise |
| */ |
| int do_cramfs_load(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| char *filename; |
| int size; |
| ulong offset = image_load_addr; |
| char *offset_virt; |
| |
| struct part_info part; |
| struct mtd_device dev; |
| struct mtdids id; |
| |
| ulong addr; |
| addr = hextoul(env_get("cramfsaddr"), NULL); |
| |
| /* hack! */ |
| /* cramfs_* only supports NOR flash chips */ |
| /* fake the device type */ |
| id.type = MTD_DEV_TYPE_NOR; |
| id.num = 0; |
| dev.id = &id; |
| part.dev = &dev; |
| /* fake the address offset */ |
| part.offset = (u64)(uintptr_t) map_sysmem(addr - OFFSET_ADJUSTMENT, 0); |
| |
| /* pre-set Boot file name */ |
| filename = env_get("bootfile"); |
| if (!filename) |
| filename = "uImage"; |
| |
| if (argc == 2) { |
| filename = argv[1]; |
| } |
| if (argc == 3) { |
| offset = simple_strtoul(argv[1], NULL, 0); |
| image_load_addr = offset; |
| filename = argv[2]; |
| } |
| |
| offset_virt = map_sysmem(offset, 0); |
| size = 0; |
| if (cramfs_check(&part)) |
| size = cramfs_load (offset_virt, &part, filename); |
| |
| if (size > 0) { |
| printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n", |
| size, offset); |
| env_set_hex("filesize", size); |
| } else { |
| printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename); |
| } |
| |
| unmap_sysmem(offset_virt); |
| unmap_sysmem((void *)(uintptr_t)part.offset); |
| |
| return !(size > 0); |
| } |
| |
| /** |
| * Routine implementing u-boot ls command which lists content of a given |
| * directory at location 'cramfsaddr'. |
| * cramfsaddr is an evironment variable. |
| * |
| * @param cmdtp command internal data |
| * @param flag command flag |
| * @param argc number of arguments supplied to the command |
| * @param argv arguments list |
| * Return: 0 on success, 1 otherwise |
| */ |
| int do_cramfs_ls(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) |
| { |
| char *filename = "/"; |
| int ret; |
| struct part_info part; |
| struct mtd_device dev; |
| struct mtdids id; |
| |
| ulong addr; |
| addr = hextoul(env_get("cramfsaddr"), NULL); |
| |
| /* hack! */ |
| /* cramfs_* only supports NOR flash chips */ |
| /* fake the device type */ |
| id.type = MTD_DEV_TYPE_NOR; |
| id.num = 0; |
| dev.id = &id; |
| part.dev = &dev; |
| /* fake the address offset */ |
| part.offset = (u64)(uintptr_t) map_sysmem(addr - OFFSET_ADJUSTMENT, 0); |
| |
| if (argc == 2) |
| filename = argv[1]; |
| |
| ret = 0; |
| if (cramfs_check(&part)) |
| ret = cramfs_ls (&part, filename); |
| unmap_sysmem((void *)(uintptr_t)part.offset); |
| |
| return ret ? 0 : 1; |
| } |
| |
| /* command line only */ |
| |
| /***************************************************/ |
| U_BOOT_CMD( |
| cramfsload, 3, 0, do_cramfs_load, |
| "load binary file from a filesystem image", |
| "[ off ] [ filename ]\n" |
| " - load binary file from address 'cramfsaddr'\n" |
| " with offset 'off'\n" |
| ); |
| U_BOOT_CMD( |
| cramfsls, 2, 1, do_cramfs_ls, |
| "list files in a directory (default /)", |
| "[ directory ]\n" |
| " - list files in a directory.\n" |
| ); |