| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * EFI application loader |
| * |
| * Copyright (c) 2016 Alexander Graf |
| */ |
| |
| #define LOG_CATEGORY LOGC_EFI |
| |
| #include <common.h> |
| #include <bootm.h> |
| #include <charset.h> |
| #include <command.h> |
| #include <dm.h> |
| #include <efi_loader.h> |
| #include <efi_selftest.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <image.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <asm/global_data.h> |
| #include <linux/libfdt.h> |
| #include <linux/libfdt_env.h> |
| #include <mapmem.h> |
| #include <memalign.h> |
| #include <asm-generic/sections.h> |
| #include <linux/linkage.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static struct efi_device_path *bootefi_image_path; |
| static struct efi_device_path *bootefi_device_path; |
| static void *image_addr; |
| static size_t image_size; |
| |
| /** |
| * efi_get_image_parameters() - return image parameters |
| * |
| * @img_addr: address of loaded image in memory |
| * @img_size: size of loaded image |
| */ |
| void efi_get_image_parameters(void **img_addr, size_t *img_size) |
| { |
| *img_addr = image_addr; |
| *img_size = image_size; |
| } |
| |
| /** |
| * efi_clear_bootdev() - clear boot device |
| */ |
| static void efi_clear_bootdev(void) |
| { |
| efi_free_pool(bootefi_device_path); |
| efi_free_pool(bootefi_image_path); |
| bootefi_device_path = NULL; |
| bootefi_image_path = NULL; |
| image_addr = NULL; |
| image_size = 0; |
| } |
| |
| /** |
| * efi_set_bootdev() - set boot device |
| * |
| * This function is called when a file is loaded, e.g. via the 'load' command. |
| * We use the path to this file to inform the UEFI binary about the boot device. |
| * |
| * @dev: device, e.g. "MMC" |
| * @devnr: number of the device, e.g. "1:2" |
| * @path: path to file loaded |
| * @buffer: buffer with file loaded |
| * @buffer_size: size of file loaded |
| */ |
| void efi_set_bootdev(const char *dev, const char *devnr, const char *path, |
| void *buffer, size_t buffer_size) |
| { |
| struct efi_device_path *device, *image; |
| efi_status_t ret; |
| |
| log_debug("dev=%s, devnr=%s, path=%s, buffer=%p, size=%zx\n", dev, |
| devnr, path, buffer, buffer_size); |
| |
| /* Forget overwritten image */ |
| if (buffer + buffer_size >= image_addr && |
| image_addr + image_size >= buffer) |
| efi_clear_bootdev(); |
| |
| /* Remember only PE-COFF and FIT images */ |
| if (efi_check_pe(buffer, buffer_size, NULL) != EFI_SUCCESS) { |
| if (IS_ENABLED(CONFIG_FIT) && |
| !fit_check_format(buffer, IMAGE_SIZE_INVAL)) { |
| /* |
| * FIT images of type EFI_OS are started via command |
| * bootm. We should not use their boot device with the |
| * bootefi command. |
| */ |
| buffer = 0; |
| buffer_size = 0; |
| } else { |
| log_debug("- not remembering image\n"); |
| return; |
| } |
| } |
| |
| /* efi_set_bootdev() is typically called repeatedly, recover memory */ |
| efi_clear_bootdev(); |
| |
| image_addr = buffer; |
| image_size = buffer_size; |
| |
| ret = efi_dp_from_name(dev, devnr, path, &device, &image); |
| if (ret == EFI_SUCCESS) { |
| bootefi_device_path = device; |
| if (image) { |
| /* FIXME: image should not contain device */ |
| struct efi_device_path *image_tmp = image; |
| |
| efi_dp_split_file_path(image, &device, &image); |
| efi_free_pool(image_tmp); |
| } |
| bootefi_image_path = image; |
| log_debug("- boot device %pD\n", device); |
| if (image) |
| log_debug("- image %pD\n", image); |
| } else { |
| log_debug("- efi_dp_from_name() failed, err=%lx\n", ret); |
| efi_clear_bootdev(); |
| } |
| } |
| |
| /** |
| * efi_env_set_load_options() - set load options from environment variable |
| * |
| * @handle: the image handle |
| * @env_var: name of the environment variable |
| * @load_options: pointer to load options (output) |
| * Return: status code |
| */ |
| static efi_status_t efi_env_set_load_options(efi_handle_t handle, |
| const char *env_var, |
| u16 **load_options) |
| { |
| const char *env = env_get(env_var); |
| size_t size; |
| u16 *pos; |
| efi_status_t ret; |
| |
| *load_options = NULL; |
| if (!env) |
| return EFI_SUCCESS; |
| size = sizeof(u16) * (utf8_utf16_strlen(env) + 1); |
| pos = calloc(size, 1); |
| if (!pos) |
| return EFI_OUT_OF_RESOURCES; |
| *load_options = pos; |
| utf8_utf16_strcpy(&pos, env); |
| ret = efi_set_load_options(handle, size, *load_options); |
| if (ret != EFI_SUCCESS) { |
| free(*load_options); |
| *load_options = NULL; |
| } |
| return ret; |
| } |
| |
| #if !CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) |
| |
| /** |
| * copy_fdt() - Copy the device tree to a new location available to EFI |
| * |
| * The FDT is copied to a suitable location within the EFI memory map. |
| * Additional 12 KiB are added to the space in case the device tree needs to be |
| * expanded later with fdt_open_into(). |
| * |
| * @fdtp: On entry a pointer to the flattened device tree. |
| * On exit a pointer to the copy of the flattened device tree. |
| * FDT start |
| * Return: status code |
| */ |
| static efi_status_t copy_fdt(void **fdtp) |
| { |
| unsigned long fdt_ram_start = -1L, fdt_pages; |
| efi_status_t ret = 0; |
| void *fdt, *new_fdt; |
| u64 new_fdt_addr; |
| uint fdt_size; |
| int i; |
| |
| for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { |
| u64 ram_start = gd->bd->bi_dram[i].start; |
| u64 ram_size = gd->bd->bi_dram[i].size; |
| |
| if (!ram_size) |
| continue; |
| |
| if (ram_start < fdt_ram_start) |
| fdt_ram_start = ram_start; |
| } |
| |
| /* |
| * Give us at least 12 KiB of breathing room in case the device tree |
| * needs to be expanded later. |
| */ |
| fdt = *fdtp; |
| fdt_pages = efi_size_in_pages(fdt_totalsize(fdt) + 0x3000); |
| fdt_size = fdt_pages << EFI_PAGE_SHIFT; |
| |
| ret = efi_allocate_pages(EFI_ALLOCATE_ANY_PAGES, |
| EFI_ACPI_RECLAIM_MEMORY, fdt_pages, |
| &new_fdt_addr); |
| if (ret != EFI_SUCCESS) { |
| log_err("ERROR: Failed to reserve space for FDT\n"); |
| goto done; |
| } |
| new_fdt = (void *)(uintptr_t)new_fdt_addr; |
| memcpy(new_fdt, fdt, fdt_totalsize(fdt)); |
| fdt_set_totalsize(new_fdt, fdt_size); |
| |
| *fdtp = (void *)(uintptr_t)new_fdt_addr; |
| done: |
| return ret; |
| } |
| |
| /** |
| * get_config_table() - get configuration table |
| * |
| * @guid: GUID of the configuration table |
| * Return: pointer to configuration table or NULL |
| */ |
| static void *get_config_table(const efi_guid_t *guid) |
| { |
| size_t i; |
| |
| for (i = 0; i < systab.nr_tables; i++) { |
| if (!guidcmp(guid, &systab.tables[i].guid)) |
| return systab.tables[i].table; |
| } |
| return NULL; |
| } |
| |
| #endif /* !CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) */ |
| |
| /** |
| * efi_install_fdt() - install device tree |
| * |
| * If fdt is not EFI_FDT_USE_INTERNAL, the device tree located at that memory |
| * address will will be installed as configuration table, otherwise the device |
| * tree located at the address indicated by environment variable fdt_addr or as |
| * fallback fdtcontroladdr will be used. |
| * |
| * On architectures using ACPI tables device trees shall not be installed as |
| * configuration table. |
| * |
| * @fdt: address of device tree or EFI_FDT_USE_INTERNAL to use the |
| * the hardware device tree as indicated by environment variable |
| * fdt_addr or as fallback the internal device tree as indicated by |
| * the environment variable fdtcontroladdr |
| * Return: status code |
| */ |
| efi_status_t efi_install_fdt(void *fdt) |
| { |
| /* |
| * The EBBR spec requires that we have either an FDT or an ACPI table |
| * but not both. |
| */ |
| #if CONFIG_IS_ENABLED(GENERATE_ACPI_TABLE) |
| if (fdt) { |
| log_warning("WARNING: Can't have ACPI table and device tree - ignoring DT.\n"); |
| return EFI_SUCCESS; |
| } |
| #else |
| struct bootm_headers img = { 0 }; |
| efi_status_t ret; |
| |
| if (fdt == EFI_FDT_USE_INTERNAL) { |
| const char *fdt_opt; |
| uintptr_t fdt_addr; |
| |
| /* Look for device tree that is already installed */ |
| if (get_config_table(&efi_guid_fdt)) |
| return EFI_SUCCESS; |
| /* Check if there is a hardware device tree */ |
| fdt_opt = env_get("fdt_addr"); |
| /* Use our own device tree as fallback */ |
| if (!fdt_opt) { |
| fdt_opt = env_get("fdtcontroladdr"); |
| if (!fdt_opt) { |
| log_err("ERROR: need device tree\n"); |
| return EFI_NOT_FOUND; |
| } |
| } |
| fdt_addr = hextoul(fdt_opt, NULL); |
| if (!fdt_addr) { |
| log_err("ERROR: invalid $fdt_addr or $fdtcontroladdr\n"); |
| return EFI_LOAD_ERROR; |
| } |
| fdt = map_sysmem(fdt_addr, 0); |
| } |
| |
| /* Install device tree */ |
| if (fdt_check_header(fdt)) { |
| log_err("ERROR: invalid device tree\n"); |
| return EFI_LOAD_ERROR; |
| } |
| |
| /* Prepare device tree for payload */ |
| ret = copy_fdt(&fdt); |
| if (ret) { |
| log_err("ERROR: out of memory\n"); |
| return EFI_OUT_OF_RESOURCES; |
| } |
| |
| if (image_setup_libfdt(&img, fdt, 0, NULL)) { |
| log_err("ERROR: failed to process device tree\n"); |
| return EFI_LOAD_ERROR; |
| } |
| |
| /* Create memory reservations as indicated by the device tree */ |
| efi_carve_out_dt_rsv(fdt); |
| |
| efi_try_purge_kaslr_seed(fdt); |
| |
| if (CONFIG_IS_ENABLED(EFI_TCG2_PROTOCOL_MEASURE_DTB)) { |
| ret = efi_tcg2_measure_dtb(fdt); |
| if (ret == EFI_SECURITY_VIOLATION) { |
| log_err("ERROR: failed to measure DTB\n"); |
| return ret; |
| } |
| } |
| |
| /* Install device tree as UEFI table */ |
| ret = efi_install_configuration_table(&efi_guid_fdt, fdt); |
| if (ret != EFI_SUCCESS) { |
| log_err("ERROR: failed to install device tree\n"); |
| return ret; |
| } |
| #endif /* GENERATE_ACPI_TABLE */ |
| |
| return EFI_SUCCESS; |
| } |
| |
| /** |
| * do_bootefi_exec() - execute EFI binary |
| * |
| * The image indicated by @handle is started. When it returns the allocated |
| * memory for the @load_options is freed. |
| * |
| * @handle: handle of loaded image |
| * @load_options: load options |
| * Return: status code |
| * |
| * Load the EFI binary into a newly assigned memory unwinding the relocation |
| * information, install the loaded image protocol, and call the binary. |
| */ |
| static efi_status_t do_bootefi_exec(efi_handle_t handle, void *load_options) |
| { |
| efi_status_t ret; |
| efi_uintn_t exit_data_size = 0; |
| u16 *exit_data = NULL; |
| |
| /* On ARM switch from EL3 or secure mode to EL2 or non-secure mode */ |
| switch_to_non_secure_mode(); |
| |
| /* |
| * The UEFI standard requires that the watchdog timer is set to five |
| * minutes when invoking an EFI boot option. |
| * |
| * Unified Extensible Firmware Interface (UEFI), version 2.7 Errata A |
| * 7.5. Miscellaneous Boot Services - EFI_BOOT_SERVICES.SetWatchdogTimer |
| */ |
| ret = efi_set_watchdog(300); |
| if (ret != EFI_SUCCESS) { |
| log_err("ERROR: Failed to set watchdog timer\n"); |
| goto out; |
| } |
| |
| /* Call our payload! */ |
| ret = EFI_CALL(efi_start_image(handle, &exit_data_size, &exit_data)); |
| if (ret != EFI_SUCCESS) { |
| log_err("## Application failed, r = %lu\n", |
| ret & ~EFI_ERROR_MASK); |
| if (exit_data) { |
| log_err("## %ls\n", exit_data); |
| efi_free_pool(exit_data); |
| } |
| } |
| |
| efi_restore_gd(); |
| |
| out: |
| free(load_options); |
| |
| if (IS_ENABLED(CONFIG_EFI_LOAD_FILE2_INITRD)) { |
| if (efi_initrd_deregister() != EFI_SUCCESS) |
| log_err("Failed to remove loadfile2 for initrd\n"); |
| } |
| |
| /* Control is returned to U-Boot, disable EFI watchdog */ |
| efi_set_watchdog(0); |
| |
| return ret; |
| } |
| |
| /** |
| * do_efibootmgr() - execute EFI boot manager |
| * |
| * Return: status code |
| */ |
| static int do_efibootmgr(void) |
| { |
| efi_handle_t handle; |
| efi_status_t ret; |
| void *load_options; |
| |
| ret = efi_bootmgr_load(&handle, &load_options); |
| if (ret != EFI_SUCCESS) { |
| log_notice("EFI boot manager: Cannot load any image\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| ret = do_bootefi_exec(handle, load_options); |
| |
| if (ret != EFI_SUCCESS) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| /** |
| * do_bootefi_image() - execute EFI binary |
| * |
| * Set up memory image for the binary to be loaded, prepare device path, and |
| * then call do_bootefi_exec() to execute it. |
| * |
| * @image_opt: string with image start address |
| * @size_opt: string with image size or NULL |
| * Return: status code |
| */ |
| static int do_bootefi_image(const char *image_opt, const char *size_opt) |
| { |
| void *image_buf; |
| unsigned long addr, size; |
| efi_status_t ret; |
| |
| #ifdef CONFIG_CMD_BOOTEFI_HELLO |
| if (!strcmp(image_opt, "hello")) { |
| image_buf = __efi_helloworld_begin; |
| size = __efi_helloworld_end - __efi_helloworld_begin; |
| efi_clear_bootdev(); |
| } else |
| #endif |
| { |
| addr = strtoul(image_opt, NULL, 16); |
| /* Check that a numeric value was passed */ |
| if (!addr) |
| return CMD_RET_USAGE; |
| image_buf = map_sysmem(addr, 0); |
| |
| if (size_opt) { |
| size = strtoul(size_opt, NULL, 16); |
| if (!size) |
| return CMD_RET_USAGE; |
| efi_clear_bootdev(); |
| } else { |
| if (image_buf != image_addr) { |
| log_err("No UEFI binary known at %s\n", |
| image_opt); |
| return CMD_RET_FAILURE; |
| } |
| size = image_size; |
| } |
| } |
| ret = efi_run_image(image_buf, size); |
| |
| if (ret != EFI_SUCCESS) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| /** |
| * efi_run_image() - run loaded UEFI image |
| * |
| * @source_buffer: memory address of the UEFI image |
| * @source_size: size of the UEFI image |
| * Return: status code |
| */ |
| efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size) |
| { |
| efi_handle_t mem_handle = NULL, handle; |
| struct efi_device_path *file_path = NULL; |
| struct efi_device_path *msg_path; |
| efi_status_t ret, ret2; |
| u16 *load_options; |
| |
| if (!bootefi_device_path || !bootefi_image_path) { |
| log_debug("Not loaded from disk\n"); |
| /* |
| * Special case for efi payload not loaded from disk, |
| * such as 'bootefi hello' or for example payload |
| * loaded directly into memory via JTAG, etc: |
| */ |
| file_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, |
| (uintptr_t)source_buffer, |
| source_size); |
| /* |
| * Make sure that device for device_path exist |
| * in load_image(). Otherwise, shell and grub will fail. |
| */ |
| ret = efi_install_multiple_protocol_interfaces(&mem_handle, |
| &efi_guid_device_path, |
| file_path, NULL); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| msg_path = file_path; |
| } else { |
| file_path = efi_dp_append(bootefi_device_path, |
| bootefi_image_path); |
| msg_path = bootefi_image_path; |
| log_debug("Loaded from disk\n"); |
| } |
| |
| log_info("Booting %pD\n", msg_path); |
| |
| ret = EFI_CALL(efi_load_image(false, efi_root, file_path, source_buffer, |
| source_size, &handle)); |
| if (ret != EFI_SUCCESS) { |
| log_err("Loading image failed\n"); |
| goto out; |
| } |
| |
| /* Transfer environment variable as load options */ |
| ret = efi_env_set_load_options(handle, "bootargs", &load_options); |
| if (ret != EFI_SUCCESS) |
| goto out; |
| |
| ret = do_bootefi_exec(handle, load_options); |
| |
| out: |
| ret2 = efi_uninstall_multiple_protocol_interfaces(mem_handle, |
| &efi_guid_device_path, |
| file_path, NULL); |
| efi_free_pool(file_path); |
| return (ret != EFI_SUCCESS) ? ret : ret2; |
| } |
| |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST |
| static efi_status_t bootefi_run_prepare(const char *load_options_path, |
| struct efi_device_path *device_path, |
| struct efi_device_path *image_path, |
| struct efi_loaded_image_obj **image_objp, |
| struct efi_loaded_image **loaded_image_infop) |
| { |
| efi_status_t ret; |
| u16 *load_options; |
| |
| ret = efi_setup_loaded_image(device_path, image_path, image_objp, |
| loaded_image_infop); |
| if (ret != EFI_SUCCESS) |
| return ret; |
| |
| /* Transfer environment variable as load options */ |
| return efi_env_set_load_options((efi_handle_t)*image_objp, |
| load_options_path, |
| &load_options); |
| } |
| |
| /** |
| * bootefi_test_prepare() - prepare to run an EFI test |
| * |
| * Prepare to run a test as if it were provided by a loaded image. |
| * |
| * @image_objp: pointer to be set to the loaded image handle |
| * @loaded_image_infop: pointer to be set to the loaded image protocol |
| * @path: dummy file path used to construct the device path |
| * set in the loaded image protocol |
| * @load_options_path: name of a U-Boot environment variable. Its value is |
| * set as load options in the loaded image protocol. |
| * Return: status code |
| */ |
| static efi_status_t bootefi_test_prepare |
| (struct efi_loaded_image_obj **image_objp, |
| struct efi_loaded_image **loaded_image_infop, const char *path, |
| const char *load_options_path) |
| { |
| efi_status_t ret; |
| |
| /* Construct a dummy device path */ |
| bootefi_device_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, 0, 0); |
| if (!bootefi_device_path) |
| return EFI_OUT_OF_RESOURCES; |
| |
| bootefi_image_path = efi_dp_from_file(NULL, path); |
| if (!bootefi_image_path) { |
| ret = EFI_OUT_OF_RESOURCES; |
| goto failure; |
| } |
| |
| ret = bootefi_run_prepare(load_options_path, bootefi_device_path, |
| bootefi_image_path, image_objp, |
| loaded_image_infop); |
| if (ret == EFI_SUCCESS) |
| return ret; |
| |
| failure: |
| efi_clear_bootdev(); |
| return ret; |
| } |
| |
| /** |
| * do_efi_selftest() - execute EFI selftest |
| * |
| * Return: status code |
| */ |
| static int do_efi_selftest(void) |
| { |
| struct efi_loaded_image_obj *image_obj; |
| struct efi_loaded_image *loaded_image_info; |
| efi_status_t ret; |
| |
| ret = bootefi_test_prepare(&image_obj, &loaded_image_info, |
| "\\selftest", "efi_selftest"); |
| if (ret != EFI_SUCCESS) |
| return CMD_RET_FAILURE; |
| |
| /* Execute the test */ |
| ret = EFI_CALL(efi_selftest(&image_obj->header, &systab)); |
| efi_restore_gd(); |
| free(loaded_image_info->load_options); |
| if (ret != EFI_SUCCESS) |
| efi_delete_handle(&image_obj->header); |
| else |
| ret = efi_delete_handle(&image_obj->header); |
| |
| return ret != EFI_SUCCESS; |
| } |
| #endif /* CONFIG_CMD_BOOTEFI_SELFTEST */ |
| |
| /** |
| * do_bootefi() - execute `bootefi` command |
| * |
| * @cmdtp: table entry describing command |
| * @flag: bitmap indicating how the command was invoked |
| * @argc: number of arguments |
| * @argv: command line arguments |
| * Return: status code |
| */ |
| static int do_bootefi(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| efi_status_t ret; |
| char *img_addr, *img_size, *str_copy, *pos; |
| void *fdt; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| /* Initialize EFI drivers */ |
| ret = efi_init_obj_list(); |
| if (ret != EFI_SUCCESS) { |
| log_err("Error: Cannot initialize UEFI sub-system, r = %lu\n", |
| ret & ~EFI_ERROR_MASK); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (argc > 2) { |
| uintptr_t fdt_addr; |
| |
| fdt_addr = hextoul(argv[2], NULL); |
| fdt = map_sysmem(fdt_addr, 0); |
| } else { |
| fdt = EFI_FDT_USE_INTERNAL; |
| } |
| ret = efi_install_fdt(fdt); |
| if (ret == EFI_INVALID_PARAMETER) |
| return CMD_RET_USAGE; |
| else if (ret != EFI_SUCCESS) |
| return CMD_RET_FAILURE; |
| |
| if (IS_ENABLED(CONFIG_CMD_BOOTEFI_BOOTMGR)) { |
| if (!strcmp(argv[1], "bootmgr")) |
| return do_efibootmgr(); |
| } |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST |
| if (!strcmp(argv[1], "selftest")) |
| return do_efi_selftest(); |
| #endif |
| str_copy = strdup(argv[1]); |
| if (!str_copy) { |
| log_err("Out of memory\n"); |
| return CMD_RET_FAILURE; |
| } |
| pos = str_copy; |
| img_addr = strsep(&pos, ":"); |
| img_size = strsep(&pos, ":"); |
| ret = do_bootefi_image(img_addr, img_size); |
| free(str_copy); |
| |
| return ret; |
| } |
| |
| U_BOOT_LONGHELP(bootefi, |
| "<image address>[:<image size>] [<fdt address>]\n" |
| " - boot EFI payload\n" |
| #ifdef CONFIG_CMD_BOOTEFI_HELLO |
| "bootefi hello\n" |
| " - boot a sample Hello World application stored within U-Boot\n" |
| #endif |
| #ifdef CONFIG_CMD_BOOTEFI_SELFTEST |
| "bootefi selftest [fdt address]\n" |
| " - boot an EFI selftest application stored within U-Boot\n" |
| " Use environment variable efi_selftest to select a single test.\n" |
| " Use 'setenv efi_selftest list' to enumerate all tests.\n" |
| #endif |
| #ifdef CONFIG_CMD_BOOTEFI_BOOTMGR |
| "bootefi bootmgr [fdt address]\n" |
| " - load and boot EFI payload based on BootOrder/BootXXXX variables.\n" |
| "\n" |
| " If specified, the device tree located at <fdt address> gets\n" |
| " exposed as EFI configuration table.\n" |
| #endif |
| ); |
| |
| U_BOOT_CMD( |
| bootefi, 4, 0, do_bootefi, |
| "Boots an EFI payload from memory", |
| bootefi_help_text |
| ); |