blob: 9925531aba43300c2a6f000fd0428e570838372e [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Samsung Electronics
* Sanghee Kim <sh0130.kim@samsung.com>
* Piotr Wilczek <p.wilczek@samsung.com>
*
* Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
*/
#ifndef __CONFIG_TRATS2_H
#define __CONFIG_TRATS2_H
#include <configs/exynos4-common.h>
#ifndef CONFIG_SYS_L2CACHE_OFF
#define CFG_SYS_PL310_BASE 0x10502000
#endif
/* TRATS2 has 4 banks of DRAM */
#define CFG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM_1 CFG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
/* Tizen - partitions definitions */
#define PARTS_CSA "csa-mmc"
#define PARTS_BOOT "boot"
#define PARTS_QBOOT "qboot"
#define PARTS_CSC "csc"
#define PARTS_ROOT "platform"
#define PARTS_DATA "data"
#define PARTS_UMS "ums"
#define PARTS_DEFAULT \
"uuid_disk=${uuid_gpt_disk};" \
"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
"name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
"name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
"name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
#define CFG_DFU_ALT \
"u-boot raw 0x80 0x800;" \
"/uImage ext4 0 2;" \
"/modem.bin ext4 0 2;" \
"/exynos4412-trats2.dtb ext4 0 2;" \
""PARTS_CSA" part 0 1;" \
""PARTS_BOOT" part 0 2;" \
""PARTS_QBOOT" part 0 3;" \
""PARTS_CSC" part 0 4;" \
""PARTS_ROOT" part 0 5;" \
""PARTS_DATA" part 0 6;" \
""PARTS_UMS" part 0 7;" \
"params.bin raw 0x38 0x8;" \
"/Image.itb ext4 0 2\0"
#define CFG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaduimage;" \
"if run loaddtb; then " \
"bootm 0x40007FC0 - ${fdtaddr};" \
"fi;" \
"bootm 0x40007FC0;\0" \
"updatebackup=" \
"mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
" mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
"run bootk\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
"console=console=ttySAC2,115200n8\0" \
"kernelname=uImage\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
"${kernelname}\0" \
"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
"${fdtfile}\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"partitions=" PARTS_DEFAULT \
"dfu_alt_info=" CFG_DFU_ALT \
"uartpath=ap\0" \
"usbpath=ap\0" \
"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
"consoleoff=set console console=ram; save; reset\0" \
"spladdr=0x40000100\0" \
"splsize=0x200\0" \
"splfile=falcon.bin\0" \
"spl_export=" \
"setexpr spl_imgsize ${splsize} + 8 ;" \
"setenv spl_imgsize 0x${spl_imgsize};" \
"setexpr spl_imgaddr ${spladdr} - 8 ;" \
"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
"spl export atags 0x40007FC0;" \
"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
"mw.l ${spl_addr_tmp} ${splsize};" \
"ext4write mmc ${mmcdev}:${mmcbootpart}" \
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
"setenv spl_addr_tmp;\0" \
ENV_ITB \
"fdtaddr=40800000\0" \
/* GPT */
/* Download menu - definitions for check keys */
#ifndef __ASSEMBLY__
#define KEY_PWR_PMIC_NAME "MAX77686_PMIC"
#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1
#define KEY_PWR_STATUS_MASK (1 << 0)
#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1
#define KEY_PWR_INTERRUPT_MASK (1 << 1)
#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22
#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33
#endif /* __ASSEMBLY__ */
#endif /* __CONFIG_H */