| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2016 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #include <common.h> |
| #include <backlight.h> |
| #include <dm.h> |
| #include <edid.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <mipi_dsi.h> |
| #include <panel.h> |
| #include <asm/gpio.h> |
| #include <power/regulator.h> |
| |
| #define EDID_I2C_ADDR 0x50 |
| |
| struct simple_panel_priv { |
| struct udevice *reg; |
| struct udevice *backlight; |
| struct gpio_desc enable; |
| }; |
| |
| static int simple_panel_enable_backlight(struct udevice *dev) |
| { |
| struct simple_panel_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| debug("%s: start, backlight = '%s'\n", __func__, priv->backlight->name); |
| dm_gpio_set_value(&priv->enable, 1); |
| ret = backlight_enable(priv->backlight); |
| debug("%s: done, ret = %d\n", __func__, ret); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int simple_panel_set_backlight(struct udevice *dev, int percent) |
| { |
| struct simple_panel_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| debug("%s: start, backlight = '%s'\n", __func__, priv->backlight->name); |
| dm_gpio_set_value(&priv->enable, 1); |
| ret = backlight_set_brightness(priv->backlight, percent); |
| debug("%s: done, ret = %d\n", __func__, ret); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| #if CONFIG_IS_ENABLED(I2C_EDID) && CONFIG_IS_ENABLED(DM_I2C) |
| static int simple_panel_get_edid_timing(struct udevice *dev, |
| struct display_timing *timings) |
| { |
| struct udevice *panel_ddc, *panel_edid; |
| struct display_timing edid_timing; |
| u8 edid_buf[EDID_SIZE] = { 0 }; |
| int ret, bpc; |
| /* Check for DDC i2c if no timings are provided */ |
| ret = uclass_get_device_by_phandle(UCLASS_I2C, dev, |
| "ddc-i2c-bus", |
| &panel_ddc); |
| if (ret) { |
| log_debug("%s: cannot get DDC i2c bus: error %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = dm_i2c_probe(panel_ddc, EDID_I2C_ADDR, 0, &panel_edid); |
| if (ret) { |
| log_debug("%s: cannot probe EDID: error %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = dm_i2c_read(panel_edid, 0, edid_buf, sizeof(edid_buf)); |
| if (ret) { |
| log_debug("%s: cannot dump EDID buffer: error %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = edid_get_timing(edid_buf, sizeof(edid_buf), |
| &edid_timing, &bpc); |
| if (ret) { |
| log_debug("%s: cannot decode EDID info: error %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| memcpy(timings, &edid_timing, sizeof(*timings)); |
| |
| return 0; |
| } |
| #else |
| static int simple_panel_get_edid_timing(struct udevice *dev, |
| struct display_timing *timings) |
| { |
| return -ENOTSUPP; |
| } |
| #endif |
| |
| static int simple_panel_get_display_timing(struct udevice *dev, |
| struct display_timing *timings) |
| { |
| const void *blob = gd->fdt_blob; |
| int ret; |
| |
| /* Check for timing subnode if panel node first */ |
| ret = fdtdec_decode_display_timing(blob, dev_of_offset(dev), |
| 0, timings); |
| if (!ret) |
| return ret; |
| |
| return simple_panel_get_edid_timing(dev, timings); |
| } |
| |
| static int simple_panel_of_to_plat(struct udevice *dev) |
| { |
| struct simple_panel_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| if (CONFIG_IS_ENABLED(DM_REGULATOR)) { |
| ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, |
| "power-supply", &priv->reg); |
| if (ret) { |
| debug("%s: Warning: cannot get power supply: ret=%d\n", |
| __func__, ret); |
| if (ret != -ENOENT) |
| return ret; |
| } |
| } |
| |
| ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, |
| "backlight", &priv->backlight); |
| if (ret) { |
| debug("%s: Cannot get backlight: ret=%d\n", __func__, ret); |
| if (ret != -ENOENT) |
| return log_ret(ret); |
| } |
| |
| ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable, |
| GPIOD_IS_OUT); |
| if (ret) { |
| debug("%s: Warning: cannot get enable GPIO: ret=%d\n", |
| __func__, ret); |
| if (ret != -ENOENT) |
| return log_ret(ret); |
| } |
| |
| return 0; |
| } |
| |
| static int simple_panel_probe(struct udevice *dev) |
| { |
| struct simple_panel_priv *priv = dev_get_priv(dev); |
| struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
| struct mipi_dsi_panel_plat *dsi_data = |
| (struct mipi_dsi_panel_plat *)dev_get_driver_data(dev); |
| int ret; |
| |
| ret = regulator_set_enable_if_allowed(priv->reg, true); |
| if (ret && ret != -ENOSYS) { |
| debug("%s: failed to enable regulator '%s' %d\n", |
| __func__, priv->reg->name, ret); |
| return ret; |
| } |
| |
| if (dsi_data) |
| memcpy(plat, dsi_data, sizeof(struct mipi_dsi_panel_plat)); |
| |
| return 0; |
| } |
| |
| static const struct panel_ops simple_panel_ops = { |
| .enable_backlight = simple_panel_enable_backlight, |
| .set_backlight = simple_panel_set_backlight, |
| .get_display_timing = simple_panel_get_display_timing, |
| }; |
| |
| static const struct mipi_dsi_panel_plat panasonic_vvx10f004b00 = { |
| .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | |
| MIPI_DSI_CLOCK_NON_CONTINUOUS, |
| .format = MIPI_DSI_FMT_RGB888, |
| .lanes = 4, |
| }; |
| |
| static const struct udevice_id simple_panel_ids[] = { |
| { .compatible = "simple-panel" }, |
| { .compatible = "auo,b133xtn01" }, |
| { .compatible = "auo,b116xw03" }, |
| { .compatible = "auo,b133htn01" }, |
| { .compatible = "boe,nv140fhmn49" }, |
| { .compatible = "lg,lb070wv8" }, |
| { .compatible = "sharp,lq123p1jx31" }, |
| { .compatible = "boe,nv101wxmn51" }, |
| { .compatible = "panasonic,vvx10f004b00", |
| .data = (ulong)&panasonic_vvx10f004b00 }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(simple_panel) = { |
| .name = "simple_panel", |
| .id = UCLASS_PANEL, |
| .of_match = simple_panel_ids, |
| .ops = &simple_panel_ops, |
| .of_to_plat = simple_panel_of_to_plat, |
| .probe = simple_panel_probe, |
| .priv_auto = sizeof(struct simple_panel_priv), |
| .plat_auto = sizeof(struct mipi_dsi_panel_plat), |
| }; |