| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2014 NVIDIA Corporation |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <asm/gpio.h> |
| #include <linux/printk.h> |
| #include <power/as3722.h> |
| #include <power/pmic.h> |
| |
| #define NUM_GPIOS 8 |
| |
| int as3722_gpio_configure(struct udevice *pmic, unsigned int gpio, |
| unsigned long flags) |
| { |
| u8 value = 0; |
| int err; |
| |
| if (flags & AS3722_GPIO_OUTPUT_VDDH) |
| value |= AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH; |
| |
| if (flags & AS3722_GPIO_INVERT) |
| value |= AS3722_GPIO_CONTROL_INVERT; |
| |
| err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value); |
| if (err) { |
| pr_err("failed to configure GPIO#%u: %d\n", gpio, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int as3722_gpio_set_value(struct udevice *dev, unsigned int gpio, |
| int level) |
| { |
| struct udevice *pmic = dev_get_parent(dev); |
| const char *l; |
| u8 value; |
| int err; |
| |
| if (gpio >= NUM_GPIOS) |
| return -EINVAL; |
| |
| err = pmic_reg_read(pmic, AS3722_GPIO_SIGNAL_OUT); |
| if (err < 0) { |
| pr_err("failed to read GPIO signal out register: %d\n", err); |
| return err; |
| } |
| value = err; |
| |
| if (level == 0) { |
| value &= ~(1 << gpio); |
| l = "low"; |
| } else { |
| value |= 1 << gpio; |
| l = "high"; |
| } |
| |
| err = pmic_reg_write(pmic, AS3722_GPIO_SIGNAL_OUT, value); |
| if (err) { |
| pr_err("failed to set GPIO#%u %s: %d\n", gpio, l, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int as3722_gpio_direction_output(struct udevice *dev, unsigned int gpio, |
| int value) |
| { |
| struct udevice *pmic = dev_get_parent(dev); |
| int err; |
| |
| if (gpio > 7) |
| return -EINVAL; |
| |
| if (value == 0) |
| value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL; |
| else |
| value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH; |
| |
| err = pmic_reg_write(pmic, AS3722_GPIO_CONTROL(gpio), value); |
| if (err) { |
| pr_err("failed to configure GPIO#%u as output: %d\n", gpio, |
| err); |
| return err; |
| } |
| |
| err = as3722_gpio_set_value(pmic, gpio, value); |
| if (err < 0) { |
| pr_err("failed to set GPIO#%u high: %d\n", gpio, err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int as3722_gpio_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| |
| uc_priv->gpio_count = NUM_GPIOS; |
| uc_priv->bank_name = "as3722_"; |
| |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops gpio_as3722_ops = { |
| .direction_output = as3722_gpio_direction_output, |
| .set_value = as3722_gpio_set_value, |
| }; |
| |
| U_BOOT_DRIVER(gpio_as3722) = { |
| .name = "gpio_as3722", |
| .id = UCLASS_GPIO, |
| .ops = &gpio_as3722_ops, |
| .probe = as3722_gpio_probe, |
| }; |