| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: NVIDIA Tegra210 Pinmux Controller |
| |
| maintainers: |
| - Thierry Reding <thierry.reding@gmail.com> |
| - Jon Hunter <jonathanh@nvidia.com> |
| |
| properties: |
| compatible: |
| const: nvidia,tegra210-pinmux |
| |
| reg: |
| items: |
| - description: APB_MISC_GP_*_PADCTRL register (pad control) |
| - description: PINMUX_AUX_* registers (pinmux) |
| |
| patternProperties: |
| "^pinmux(-[a-z0-9-_]+)?$": |
| type: object |
| |
| # pin groups |
| additionalProperties: |
| $ref: nvidia,tegra-pinmux-common.yaml |
| additionalProperties: false |
| properties: |
| nvidia,pins: |
| items: |
| enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3, |
| ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4, |
| bt_wake_ap_ph5, button_home_py1, button_power_on_px5, |
| button_slide_sw_py0, button_vol_down_px7, |
| button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7, |
| cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0, |
| cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2, |
| cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5, |
| clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1, |
| dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2, |
| dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5, |
| dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0, |
| dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4, |
| dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1, |
| gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2, |
| gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1, |
| gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2, |
| gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1, |
| jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3, |
| lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0, |
| motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6, |
| pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0, |
| pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6, |
| pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1, |
| pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2, |
| pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2, |
| qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0, |
| sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1, |
| sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3, |
| sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1, |
| sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3, |
| sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2, |
| spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0, |
| spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5, |
| spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0, |
| spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7, |
| touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2, |
| uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2, |
| uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3, |
| uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6, |
| uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4, |
| usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1, |
| wifi_wake_ap_ph2, |
| # drive groups |
| drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6, |
| drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4, |
| drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1, |
| drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4, |
| drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3, |
| drive_sdmmc4 ] |
| |
| nvidia,function: |
| enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya, |
| displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1, |
| i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b, |
| i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0, |
| pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata, |
| sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2, |
| spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd, |
| usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ] |
| |
| nvidia,pull: true |
| nvidia,tristate: true |
| nvidia,pull-down-strength: true |
| nvidia,pull-up-strength: true |
| nvidia,high-speed-mode: true |
| nvidia,enable-input: true |
| nvidia,open-drain: true |
| nvidia,lock: true |
| nvidia,drive-type: true |
| nvidia,io-hv: true |
| nvidia,slew-rate-rising: true |
| nvidia,slew-rate-falling: true |
| |
| required: |
| - nvidia,pins |
| |
| additionalProperties: false |
| |
| required: |
| - compatible |
| - reg |
| |
| examples: |
| - | |
| #include <dt-bindings/pinctrl/pinctrl-tegra.h> |
| |
| pinmux: pinmux@70000800 { |
| compatible = "nvidia,tegra210-pinmux"; |
| reg = <0x700008d4 0x02a8>, /* Pad control registers */ |
| <0x70003000 0x1000>; /* Mux registers */ |
| |
| pinctrl-names = "boot"; |
| pinctrl-0 = <&state_boot>; |
| |
| state_boot: pinmux { |
| gen1_i2c_scl_pj1 { |
| nvidia,pins = "gen1_i2c_scl_pj1"; |
| nvidia,function = "i2c1"; |
| nvidia,pull = <TEGRA_PIN_PULL_NONE>; |
| nvidia,tristate = <TEGRA_PIN_DISABLE>; |
| nvidia,enable-input = <TEGRA_PIN_ENABLE>; |
| nvidia,open-drain = <TEGRA_PIN_ENABLE>; |
| nvidia,io-hv = <TEGRA_PIN_ENABLE>; |
| }; |
| }; |
| }; |
| ... |
