| Get the Source and prebuild binary |
| ================================== |
| |
| > mkdir ~/evb_rk3229 |
| > cd ~/evb_rk3229 |
| > git clone git://git.denx.de/u-boot.git |
| > git clone https://github.com/OP-TEE/optee_os.git |
| > git clone https://github.com/rockchip-linux/rkbin.git |
| > git clone https://github.com/rockchip-linux/rkdeveloptool.git |
| |
| Compile the OP-TEE |
| =============== |
| |
| > cd optee_os |
| > make clean |
| > make CROSS_COMPILE=arm-none-eabi- PLATFORM=rockchip-rk322x |
| Get tee-raw.bin in this step, copy it to U-Boot root dir: |
| > cp out/arm-plat-rockchip/core/tee-raw.bin ../u-boot/tee.bin |
| |
| Compile the U-Boot |
| ================== |
| |
| > cd ../u-boot |
| > make evb-rk3229_defconfig |
| > TEE=tee.bin CROSS_COMPILE=arm-linux-gnueabihf- make |
| |
| Get u-boot-rockchip.bin in this step. |
| |
| Compile the rkdeveloptool |
| ======================= |
| Follow instructions in latest README |
| > cd ../rkdeveloptool |
| > autoreconf -i |
| > ./configure |
| > make |
| > sudo make install |
| |
| Get rkdeveloptool in you Host in this step. |
| |
| Both origin binaries and Tool are ready now, choose either option 1 or |
| option 2 to deploy U-Boot. |
| |
| Flash the image to eMMC |
| ======================= |
| Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: |
| > cd .. |
| > rkdeveloptool/rkdeveloptool db rkbin/rk32/rk322x_loader_v1.04.232.bin |
| > rkdeveloptool/rkdeveloptool wl 64 u-boot/u-boot-rockchip.bin |
| > rkdeveloptool/rkdeveloptool rd |
| |
| Flash the image to SD card |
| ========================== |
| > dd if=u-boot/u-boot-rockchip.bin of=/dev/sdb seek=64 |
| |
| You should be able to get U-Boot log message with OP-TEE boot info: |
| |
| U-Boot TPL 2023.07-00524-gf5346eba55-dirty (Jul 15 2023 - 14:22:51) |
| Trying to boot from BOOTROM |
| Returning to boot ROM... |
| |
| U-Boot SPL 2023.07-00524-gf5346eba55-dirty (Jul 15 2023 - 14:22:51 +0200) |
| Trying to boot from MMC1 |
| I/TC: |
| I/TC: Non-secure external DT found |
| I/TC: Switching console to device: /serial@11030000 |
| I/TC: OP-TEE version: 3.22.0-27-g893a762d1 (gcc version 10.3.1 20210621 (release) (15:10.3-2021.07-4)) #1 Sat Jul 15 12:14:36 UTC 2023 arm |
| I/TC: WARNING: This OP-TEE configuration might be insecure! |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html |
| I/TC: Primary CPU initializing |
| M/TC: Not protecting region 1: 0x68400000-0x68600000 |
| I/TC: Primary CPU switching to normal world boot |
| |
| |
| U-Boot 2023.07-00524-gf5346eba55-dirty (Jul 15 2023 - 14:22:51 +0200) |
| |
| Model: Rockchip RK3229 Evaluation board |
| DRAM: 1 GiB (effective 992 MiB) |
| Core: 113 devices, 16 uclasses, devicetree: separate |
| MMC: mmc@30000000: 1, mmc@30020000: 0 |
| Loading Environment from MMC... Card did not respond to voltage select! : -110 |
| *** Warning - No block device, using default environment |
| |
| In: serial@11030000 |
| Out: serial@11030000 |
| Err: serial@11030000 |
| Model: Rockchip RK3229 Evaluation board |
| Net: |
| Warning: ethernet@30200000 (eth0) using random MAC address - 72:65:2b:f1:c5:0a |
| eth0: ethernet@30200000 |
| Hit any key to stop autoboot: 0 |
| => |
| |
| |
| For more detail, please reference to: |
| http://opensource.rock-chips.com/wiki_Boot_option |
