| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <fuse.h> |
| #include <misc.h> |
| #include <errno.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <power/stpmic1.h> |
| |
| #define STM32MP_OTP_BANK 0 |
| #define STM32MP_NVM_BANK 1 |
| |
| /* |
| * The 'fuse' command API |
| */ |
| int fuse_read(u32 bank, u32 word, u32 *val) |
| { |
| int ret; |
| struct udevice *dev; |
| |
| switch (bank) { |
| case STM32MP_OTP_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stm32mp_bsec), |
| &dev); |
| if (ret) |
| return ret; |
| ret = misc_read(dev, word * 4 + STM32_BSEC_SHADOW_OFFSET, |
| val, 4); |
| if (ret != 4) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| |
| #ifdef CONFIG_PMIC_STPMIC1 |
| case STM32MP_NVM_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| *val = 0; |
| ret = misc_read(dev, -word, val, 1); |
| if (ret != 1) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| #endif /* CONFIG_PMIC_STPMIC1 */ |
| |
| default: |
| printf("stm32mp %s: wrong value for bank %i\n", __func__, bank); |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| int fuse_prog(u32 bank, u32 word, u32 val) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| switch (bank) { |
| case STM32MP_OTP_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stm32mp_bsec), |
| &dev); |
| if (ret) |
| return ret; |
| ret = misc_write(dev, word * 4 + STM32_BSEC_OTP_OFFSET, |
| &val, 4); |
| if (ret != 4) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| |
| #ifdef CONFIG_PMIC_STPMIC1 |
| case STM32MP_NVM_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| ret = misc_write(dev, word, &val, 1); |
| if (ret != 1) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| #endif /* CONFIG_PMIC_STPMIC1 */ |
| |
| default: |
| printf("stm32mp %s: wrong value for bank %i\n", __func__, bank); |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| int fuse_sense(u32 bank, u32 word, u32 *val) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| switch (bank) { |
| case STM32MP_OTP_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stm32mp_bsec), |
| &dev); |
| if (ret) |
| return ret; |
| ret = misc_read(dev, word * 4 + STM32_BSEC_OTP_OFFSET, val, 4); |
| if (ret != 4) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| |
| #ifdef CONFIG_PMIC_STPMIC1 |
| case STM32MP_NVM_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| *val = 0; |
| ret = misc_read(dev, word, val, 1); |
| if (ret != 1) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| #endif /* CONFIG_PMIC_STPMIC1 */ |
| |
| default: |
| printf("stm32mp %s: wrong value for bank %i\n", __func__, bank); |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| int fuse_override(u32 bank, u32 word, u32 val) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| switch (bank) { |
| case STM32MP_OTP_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stm32mp_bsec), |
| &dev); |
| if (ret) |
| return ret; |
| ret = misc_write(dev, word * 4 + STM32_BSEC_SHADOW_OFFSET, |
| &val, 4); |
| if (ret != 4) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| |
| #ifdef CONFIG_PMIC_STPMIC1 |
| case STM32MP_NVM_BANK: |
| ret = uclass_get_device_by_driver(UCLASS_MISC, |
| DM_DRIVER_GET(stpmic1_nvm), |
| &dev); |
| if (ret) |
| return ret; |
| ret = misc_write(dev, -word, &val, 1); |
| if (ret != 1) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| break; |
| #endif /* CONFIG_PMIC_STPMIC1 */ |
| |
| default: |
| printf("stm32mp %s: wrong value for bank %i\n", |
| __func__, bank); |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |