| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2014 Charles Manning <cdhmanning@gmail.com> |
| * |
| * Reference documents: |
| * Cyclone V SoC: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/cyclone-v/cv_5400a.pdf |
| * Arria V SoC: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/arria-v/av_5400a.pdf |
| * Arria 10 SoC: https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/hb/arria-10/a10_5400a.pdf |
| * |
| * Bootable SoCFPGA image requires a structure of the following format |
| * positioned at offset 0x40 of the bootable image. Endian is LSB. |
| * |
| * There are two versions of the SoCFPGA header format, v0 and v1. |
| * The version 0 is used by Cyclone V SoC and Arria V SoC, while |
| * the version 1 is used by the Arria 10 SoC. |
| * |
| * Version 0: |
| * Offset Length Usage |
| * ----------------------- |
| * 0x40 4 Validation word (0x31305341) |
| * 0x44 1 Version (0x0) |
| * 0x45 1 Flags (unused, zero is fine) |
| * 0x46 2 Length (in units of u32, including the end checksum). |
| * 0x48 2 Zero (0x0) |
| * 0x4A 2 Checksum over the header. NB Not CRC32 |
| * |
| * Version 1: |
| * Offset Length Usage |
| * ----------------------- |
| * 0x40 4 Validation word (0x31305341) |
| * 0x44 1 Version (0x1) |
| * 0x45 1 Flags (unused, zero is fine) |
| * 0x46 2 Header length (in units of u8). |
| * 0x48 4 Length (in units of u8). |
| * 0x4C 4 Image entry offset from standard of header |
| * 0x50 2 Zero (0x0) |
| * 0x52 2 Checksum over the header. NB Not CRC32 |
| * |
| * At the end of the code we have a 32-bit CRC checksum over whole binary |
| * excluding the CRC. |
| * |
| * Note that the CRC used here is **not** the zlib/Adler crc32. It is the |
| * CRC-32 used in bzip2, ethernet and elsewhere. |
| * |
| * The Image entry offset in version 1 image is relative the the start of |
| * the header, 0x40, and must not be a negative number. Therefore, it is |
| * only possible to make the SoCFPGA jump forward. The U-Boot bootloader |
| * places a trampoline instruction at offset 0x5c, 0x14 bytes from the |
| * start of the SoCFPGA header, which jumps to the reset vector. |
| * |
| * The image is padded out to 64k, because that is what is |
| * typically used to write the image to the boot medium. |
| */ |
| |
| #include "pbl_crc32.h" |
| #include "imagetool.h" |
| #include "mkimage.h" |
| #include <u-boot/crc.h> |
| |
| #include <image.h> |
| |
| #define HEADER_OFFSET 0x40 |
| #define VALIDATION_WORD 0x31305341 |
| #define IMAGE_ALIGN 16 |
| |
| /* Minimum and default entry point offset */ |
| #define ENTRY_POINT_OFFSET 0x14 |
| |
| static uint8_t buffer_v0[0x10000]; |
| static uint8_t buffer_v1[0x40000]; |
| |
| struct socfpga_header_v0 { |
| uint32_t validation; |
| uint8_t version; |
| uint8_t flags; |
| uint16_t length_u32; |
| uint16_t zero; |
| uint16_t checksum; |
| }; |
| |
| struct socfpga_header_v1 { |
| uint32_t validation; |
| uint8_t version; |
| uint8_t flags; |
| uint16_t header_u8; |
| uint32_t length_u8; |
| uint32_t entry_offset; |
| uint16_t zero; |
| uint16_t checksum; |
| }; |
| |
| static unsigned int sfp_hdr_size(uint8_t ver) |
| { |
| if (ver == 0) |
| return sizeof(struct socfpga_header_v0); |
| if (ver == 1) |
| return sizeof(struct socfpga_header_v1); |
| return 0; |
| } |
| |
| static unsigned int sfp_max_size(uint8_t ver) |
| { |
| if (ver == 0) |
| return sizeof(buffer_v0); |
| if (ver == 1) |
| return sizeof(buffer_v1); |
| return 0; |
| } |
| |
| static unsigned int sfp_aligned_len(uint32_t size) |
| { |
| /* Add 4 bytes for CRC and align to 16 bytes */ |
| return ALIGN(size + sizeof(uint32_t), IMAGE_ALIGN); |
| } |
| |
| /* |
| * The header checksum is just a very simple checksum over |
| * the header area. |
| * There is still a crc32 over the whole lot. |
| */ |
| static uint16_t sfp_hdr_checksum(uint8_t *buf, unsigned char ver) |
| { |
| uint16_t ret = 0; |
| int len = sfp_hdr_size(ver) - sizeof(ret); |
| |
| while (--len) |
| ret += *buf++; |
| |
| return ret; |
| } |
| |
| static void sfp_build_header(uint8_t *buf, uint8_t ver, uint8_t flags, |
| uint32_t length_bytes, |
| struct image_tool_params *params) |
| { |
| uint32_t entry_offset = params->eflag ? params->ep : ENTRY_POINT_OFFSET; |
| struct socfpga_header_v0 header_v0 = { |
| .validation = cpu_to_le32(VALIDATION_WORD), |
| .version = 0, |
| .flags = flags, |
| .length_u32 = cpu_to_le16(length_bytes / 4), |
| .zero = 0, |
| }; |
| |
| struct socfpga_header_v1 header_v1 = { |
| .validation = cpu_to_le32(VALIDATION_WORD), |
| .version = 1, |
| .flags = flags, |
| .header_u8 = cpu_to_le16(sizeof(header_v1)), |
| .length_u8 = cpu_to_le32(length_bytes), |
| /* Trampoline offset */ |
| .entry_offset = cpu_to_le32(entry_offset), |
| .zero = 0, |
| }; |
| |
| uint16_t csum; |
| |
| if (ver == 0) { |
| csum = sfp_hdr_checksum((uint8_t *)&header_v0, 0); |
| header_v0.checksum = cpu_to_le16(csum); |
| memcpy(buf, &header_v0, sizeof(header_v0)); |
| } else { |
| csum = sfp_hdr_checksum((uint8_t *)&header_v1, 1); |
| header_v1.checksum = cpu_to_le16(csum); |
| memcpy(buf, &header_v1, sizeof(header_v1)); |
| } |
| } |
| |
| /* |
| * Perform a rudimentary verification of header and return |
| * size of image. |
| */ |
| static int sfp_verify_header(const uint8_t *buf, uint8_t *ver) |
| { |
| struct socfpga_header_v0 header_v0; |
| struct socfpga_header_v1 header_v1; |
| uint16_t hdr_csum, sfp_csum; |
| uint32_t img_len; |
| |
| /* |
| * Header v0 is always smaller than Header v1 and the validation |
| * word and version field is at the same place, so use Header v0 |
| * to check for version during verifiction and upgrade to Header |
| * v1 if needed. |
| */ |
| memcpy(&header_v0, buf, sizeof(header_v0)); |
| |
| if (le32_to_cpu(header_v0.validation) != VALIDATION_WORD) |
| return -1; |
| |
| if (header_v0.version == 0) { |
| hdr_csum = le16_to_cpu(header_v0.checksum); |
| sfp_csum = sfp_hdr_checksum((uint8_t *)&header_v0, 0); |
| img_len = le16_to_cpu(header_v0.length_u32) * 4; |
| } else if (header_v0.version == 1) { |
| memcpy(&header_v1, buf, sizeof(header_v1)); |
| hdr_csum = le16_to_cpu(header_v1.checksum); |
| sfp_csum = sfp_hdr_checksum((uint8_t *)&header_v1, 1); |
| img_len = le32_to_cpu(header_v1.length_u8); |
| } else { /* Invalid version */ |
| return -EINVAL; |
| } |
| |
| /* Verify checksum */ |
| if (hdr_csum != sfp_csum) |
| return -EINVAL; |
| |
| *ver = header_v0.version; |
| return img_len; |
| } |
| |
| /* Sign the buffer and return the signed buffer size */ |
| static int sfp_sign_buffer(uint8_t *buf, uint8_t ver, uint8_t flags, |
| int len, int pad_64k, |
| struct image_tool_params *params) |
| { |
| uint32_t calc_crc; |
| uint32_t crc_off; |
| |
| /* Align the length up */ |
| len = sfp_aligned_len(len); |
| |
| /* Build header */ |
| sfp_build_header(buf + HEADER_OFFSET, ver, flags, len, params); |
| |
| /* Calculate and apply the CRC */ |
| crc_off = len - sizeof(uint32_t); /* at last 4 bytes of image */ |
| calc_crc = ~pbl_crc32(0, (char *)buf, crc_off); |
| |
| *((uint32_t *)(buf + crc_off)) = cpu_to_le32(calc_crc); |
| |
| if (!pad_64k) |
| return len + 4; |
| |
| return sfp_max_size(ver); |
| } |
| |
| /* Verify that the buffer looks sane */ |
| static int sfp_verify_buffer(const uint8_t *buf) |
| { |
| int len; /* Including 32bit CRC */ |
| uint32_t calc_crc; |
| uint32_t buf_crc; |
| uint8_t ver = 0; |
| |
| len = sfp_verify_header(buf + HEADER_OFFSET, &ver); |
| if (len < 0) { |
| debug("Invalid header\n"); |
| return -1; |
| } |
| |
| if (len < HEADER_OFFSET || len > sfp_max_size(ver)) { |
| debug("Invalid header length (%i)\n", len); |
| return -1; |
| } |
| |
| /* |
| * Adjust length to the base of the CRC. |
| * Check the CRC. |
| */ |
| len -= 4; |
| |
| calc_crc = ~pbl_crc32(0, (const char *)buf, len); |
| |
| buf_crc = le32_to_cpu(*((uint32_t *)(buf + len))); |
| |
| if (buf_crc != calc_crc) { |
| fprintf(stderr, "CRC32 does not match (%08x != %08x)\n", |
| buf_crc, calc_crc); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* mkimage glue functions */ |
| static int socfpgaimage_verify_header(unsigned char *ptr, int image_size, |
| struct image_tool_params *params) |
| { |
| if (image_size < 0x80) |
| return -1; |
| |
| return sfp_verify_buffer(ptr); |
| } |
| |
| static void socfpgaimage_print_header_v0(struct socfpga_header_v0 *header) |
| { |
| printf("Image Type\t: Cyclone V / Arria V SoC Image\n"); |
| printf("Validation word\t: 0x%08x\n", |
| le32_to_cpu(header->validation)); |
| printf("Version\t\t: 0x%08x\n", header->version); |
| printf("Flags\t\t: 0x%08x\n", header->flags); |
| printf("Program length\t: 0x%08x\n", |
| le16_to_cpu(header->length_u32)); |
| printf("Header checksum\t: 0x%08x\n", |
| le16_to_cpu(header->checksum)); |
| } |
| |
| static void socfpgaimage_print_header_v1(struct socfpga_header_v1 *header) |
| { |
| printf("Image Type\t: Arria 10 SoC Image\n"); |
| printf("Validation word\t: 0x%08x\n", |
| le32_to_cpu(header->validation)); |
| printf("Version\t\t: 0x%08x\n", header->version); |
| printf("Flags\t\t: 0x%08x\n", header->flags); |
| printf("Header length\t: 0x%08x\n", |
| le16_to_cpu(header->header_u8)); |
| printf("Program length\t: 0x%08x\n", |
| le32_to_cpu(header->length_u8)); |
| printf("Program entry\t: 0x%08x\n", |
| le32_to_cpu(header->entry_offset)); |
| printf("Header checksum\t: 0x%08x\n", |
| le16_to_cpu(header->checksum)); |
| } |
| |
| static void socfpgaimage_print_header(const void *ptr, struct image_tool_params *params) |
| { |
| const void *header = ptr + HEADER_OFFSET; |
| struct socfpga_header_v0 *header_v0; |
| |
| if (sfp_verify_buffer(ptr) == 0) { |
| header_v0 = (struct socfpga_header_v0 *)header; |
| |
| if (header_v0->version == 0) |
| socfpgaimage_print_header_v0(header_v0); |
| else |
| socfpgaimage_print_header_v1((struct socfpga_header_v1 *)header); |
| } else { |
| printf("Not a sane SOCFPGA preloader\n"); |
| } |
| } |
| |
| static int socfpgaimage_check_params_v0(struct image_tool_params *params) |
| { |
| /* Not sure if we should be accepting fflags */ |
| return (params->dflag && (params->fflag || params->lflag)) || |
| (params->fflag && (params->dflag || params->lflag)) || |
| (params->lflag && (params->dflag || params->fflag)); |
| } |
| |
| static int socfpgaimage_check_params_v1(struct image_tool_params *params) |
| { |
| /* |
| * If the entry point is specified, ensure it is >= ENTRY_POINT_OFFSET |
| * and it is 4 bytes aligned. |
| */ |
| if (params->eflag && (params->ep < ENTRY_POINT_OFFSET || |
| params->ep % 4 != 0)) { |
| fprintf(stderr, |
| "Error: Entry point must be greater than 0x%x.\n", |
| ENTRY_POINT_OFFSET); |
| return -1; |
| } |
| |
| /* Not sure if we should be accepting fflags */ |
| return (params->dflag && (params->fflag || params->lflag)) || |
| (params->fflag && (params->dflag || params->lflag)) || |
| (params->lflag && (params->dflag || params->fflag)); |
| } |
| |
| static int socfpgaimage_check_image_types_v0(uint8_t type) |
| { |
| if (type == IH_TYPE_SOCFPGAIMAGE) |
| return EXIT_SUCCESS; |
| return EXIT_FAILURE; |
| } |
| |
| static int socfpgaimage_check_image_types_v1(uint8_t type) |
| { |
| if (type == IH_TYPE_SOCFPGAIMAGE_V1) |
| return EXIT_SUCCESS; |
| return EXIT_FAILURE; |
| } |
| |
| /* |
| * To work in with the mkimage framework, we do some ugly stuff... |
| * |
| * First, socfpgaimage_vrec_header() is called. |
| * We prepend a fake header big enough to include crc32 and align image to 16 |
| * bytes. |
| * This gives us enough space to do what we want later. |
| * |
| * Next, socfpgaimage_set_header() is called. |
| * We fix up the buffer by moving the image to the start of the buffer. |
| * We now have some room to do what we need (add CRC). |
| */ |
| |
| static int data_size; |
| |
| static int sfp_fake_header_size(unsigned int size, uint8_t ver) |
| { |
| unsigned int align_size; |
| |
| align_size = sfp_aligned_len(size); |
| |
| /* extra bytes needed */ |
| return align_size - size; |
| } |
| |
| static int sfp_vrec_header(struct image_tool_params *params, |
| struct image_type_params *tparams, uint8_t ver) |
| { |
| struct stat sbuf; |
| |
| if (params->datafile && |
| stat(params->datafile, &sbuf) == 0 && |
| sbuf.st_size <= (sfp_max_size(ver) - sizeof(uint32_t))) { |
| data_size = sbuf.st_size; |
| tparams->header_size = sfp_fake_header_size(data_size, ver); |
| } |
| return 0; |
| |
| } |
| |
| static int socfpgaimage_vrec_header_v0(struct image_tool_params *params, |
| struct image_type_params *tparams) |
| { |
| return sfp_vrec_header(params, tparams, 0); |
| } |
| |
| static int socfpgaimage_vrec_header_v1(struct image_tool_params *params, |
| struct image_type_params *tparams) |
| { |
| return sfp_vrec_header(params, tparams, 1); |
| } |
| |
| static void sfp_set_header(void *ptr, unsigned char ver, |
| struct image_tool_params *params) |
| { |
| uint8_t *buf = (uint8_t *)ptr; |
| |
| /* |
| * This function is called after vrec_header() has been called. |
| * At this stage we have the sfp_fake_header_size() dummy bytes |
| * followed by data_size image bytes. |
| * We need to fix the buffer by moving the image bytes back to |
| * the beginning of the buffer, then actually do the signing stuff... |
| */ |
| memmove(buf, buf + sfp_fake_header_size(data_size, ver), data_size); |
| memset(buf + data_size, 0, sfp_fake_header_size(data_size, ver)); |
| |
| sfp_sign_buffer(buf, ver, 0, data_size, 0, params); |
| } |
| |
| static void socfpgaimage_set_header_v0(void *ptr, struct stat *sbuf, int ifd, |
| struct image_tool_params *params) |
| { |
| sfp_set_header(ptr, 0, params); |
| } |
| |
| static void socfpgaimage_set_header_v1(void *ptr, struct stat *sbuf, int ifd, |
| struct image_tool_params *params) |
| { |
| sfp_set_header(ptr, 1, params); |
| } |
| |
| U_BOOT_IMAGE_TYPE( |
| socfpgaimage, |
| "Altera SoCFPGA Cyclone V / Arria V image support", |
| 0, /* This will be modified by vrec_header() */ |
| (void *)buffer_v0, |
| socfpgaimage_check_params_v0, |
| socfpgaimage_verify_header, |
| socfpgaimage_print_header, |
| socfpgaimage_set_header_v0, |
| NULL, |
| socfpgaimage_check_image_types_v0, |
| NULL, |
| socfpgaimage_vrec_header_v0 |
| ); |
| |
| U_BOOT_IMAGE_TYPE( |
| socfpgaimage_v1, |
| "Altera SoCFPGA Arria10 image support", |
| 0, /* This will be modified by vrec_header() */ |
| (void *)buffer_v1, |
| socfpgaimage_check_params_v1, |
| socfpgaimage_verify_header, |
| socfpgaimage_print_header, |
| socfpgaimage_set_header_v1, |
| NULL, |
| socfpgaimage_check_image_types_v1, |
| NULL, |
| socfpgaimage_vrec_header_v1 |
| ); |