| # SPDX-License-Identifier: GPL-2.0+ |
| # Copyright (c) 2016, Google Inc. |
| # |
| # U-Boot Verified Boot Test |
| |
| """ |
| This tests verified boot in the following ways: |
| |
| For image verification: |
| - Create FIT (unsigned) with mkimage |
| - Check that verification shows that no keys are verified |
| - Sign image |
| - Check that verification shows that a key is now verified |
| |
| For configuration verification: |
| - Corrupt signature and check for failure |
| - Create FIT (with unsigned configuration) with mkimage |
| - Check that image verification works |
| - Sign the FIT and mark the key as 'required' for verification |
| - Check that image verification works |
| - Corrupt the signature |
| - Check that image verification no-longer works |
| |
| For pre-load header verification: |
| - Create FIT image with a pre-load header |
| - Check that signature verification succeeds |
| - Corrupt the FIT image |
| - Check that signature verification fails |
| - Launch an FIT image without a pre-load header |
| - Check that image verification fails |
| |
| Tests run with both SHA1 and SHA256 hashing. |
| |
| This also tests fdt_add_pubkey utility in the simple way: |
| - Create DTB and FIT files |
| - Add keys with fdt_add_pubkey to DTB |
| - Sign FIT image |
| - Check with fit_check_sign that keys properly added to DTB file |
| """ |
| |
| import os |
| import shutil |
| import struct |
| import pytest |
| import u_boot_utils as util |
| import vboot_forge |
| import vboot_evil |
| |
| # Common helper functions |
| def dtc(dts, cons, dtc_args, datadir, tmpdir, dtb): |
| """Run the device tree compiler to compile a .dts file |
| |
| The output file will be the same as the input file but with a .dtb |
| extension. |
| |
| Args: |
| dts: Device tree file to compile. |
| cons: U-Boot console. |
| dtc_args: DTC arguments. |
| datadir: Path to data directory. |
| tmpdir: Path to temp directory. |
| dtb: Resulting DTB file. |
| """ |
| dtb = dts.replace('.dts', '.dtb') |
| util.run_and_log(cons, 'dtc %s %s%s -O dtb ' |
| '-o %s%s' % (dtc_args, datadir, dts, tmpdir, dtb)) |
| |
| def make_fit(its, cons, mkimage, dtc_args, datadir, fit): |
| """Make a new FIT from the .its source file. |
| |
| This runs 'mkimage -f' to create a new FIT. |
| |
| Args: |
| its: Filename containing .its source. |
| cons: U-Boot console. |
| mkimage: Path to mkimage utility. |
| dtc_args: DTC arguments. |
| datadir: Path to data directory. |
| fit: Resulting FIT file. |
| """ |
| util.run_and_log(cons, [mkimage, '-D', dtc_args, '-f', |
| '%s%s' % (datadir, its), fit]) |
| |
| # Only run the full suite on a few combinations, since it doesn't add any more |
| # test coverage. |
| TESTDATA_IN = [ |
| ['sha1-basic', 'sha1', '', None, False, True, False, False], |
| ['sha1-pad', 'sha1', '', '-E -p 0x10000', False, False, False, False], |
| ['sha1-pss', 'sha1', '-pss', None, False, False, False, False], |
| ['sha1-pss-pad', 'sha1', '-pss', '-E -p 0x10000', False, False, False, False], |
| ['sha256-basic', 'sha256', '', None, False, False, False, False], |
| ['sha256-pad', 'sha256', '', '-E -p 0x10000', False, False, False, False], |
| ['sha256-pss', 'sha256', '-pss', None, False, False, False, False], |
| ['sha256-pss-pad', 'sha256', '-pss', '-E -p 0x10000', False, False, False, False], |
| ['sha256-pss-required', 'sha256', '-pss', None, True, False, False, False], |
| ['sha256-pss-pad-required', 'sha256', '-pss', '-E -p 0x10000', True, True, False, False], |
| ['sha384-basic', 'sha384', '', None, False, False, False, False], |
| ['sha384-pad', 'sha384', '', '-E -p 0x10000', False, False, False, False], |
| ['algo-arg', 'algo-arg', '', '-o sha256,rsa2048', False, False, True, False], |
| ['sha256-global-sign', 'sha256', '', '', False, False, False, True], |
| ['sha256-global-sign-pss', 'sha256', '-pss', '', False, False, False, True], |
| ] |
| |
| # Mark all but the first test as slow, so they are not run with '-k not slow' |
| TESTDATA = [TESTDATA_IN[0]] |
| TESTDATA += [pytest.param(*v, marks=pytest.mark.slow) for v in TESTDATA_IN[1:]] |
| |
| @pytest.mark.boardspec('sandbox') |
| @pytest.mark.buildconfigspec('fit_signature') |
| @pytest.mark.requiredtool('dtc') |
| @pytest.mark.requiredtool('fdtget') |
| @pytest.mark.requiredtool('fdtput') |
| @pytest.mark.requiredtool('openssl') |
| @pytest.mark.parametrize("name,sha_algo,padding,sign_options,required,full_test,algo_arg,global_sign", |
| TESTDATA) |
| def test_vboot(u_boot_console, name, sha_algo, padding, sign_options, required, |
| full_test, algo_arg, global_sign): |
| """Test verified boot signing with mkimage and verification with 'bootm'. |
| |
| This works using sandbox only as it needs to update the device tree used |
| by U-Boot to hold public keys from the signing process. |
| |
| The SHA1 and SHA256 tests are combined into a single test since the |
| key-generation process is quite slow and we want to avoid doing it twice. |
| """ |
| def dtc_options(dts, options): |
| """Run the device tree compiler to compile a .dts file |
| |
| The output file will be the same as the input file but with a .dtb |
| extension. |
| |
| Args: |
| dts: Device tree file to compile. |
| options: Options provided to the compiler. |
| """ |
| dtb = dts.replace('.dts', '.dtb') |
| util.run_and_log(cons, 'dtc %s %s%s -O dtb ' |
| '-o %s%s %s' % (dtc_args, datadir, dts, tmpdir, dtb, options)) |
| |
| def run_binman(dtb): |
| """Run binman to build an image |
| |
| Args: |
| dtb: Device tree file used as input file. |
| """ |
| pythonpath = os.environ.get('PYTHONPATH', '') |
| os.environ['PYTHONPATH'] = pythonpath + ':' + '%s/../scripts/dtc/pylibfdt' % tmpdir |
| util.run_and_log(cons, [binman, 'build', '-d', "%s/%s" % (tmpdir,dtb), |
| '-a', "pre-load-key-path=%s" % tmpdir, '-O', |
| tmpdir, '-I', tmpdir]) |
| os.environ['PYTHONPATH'] = pythonpath |
| |
| def run_bootm(sha_algo, test_type, expect_string, boots, fit=None): |
| """Run a 'bootm' command U-Boot. |
| |
| This always starts a fresh U-Boot instance since the device tree may |
| contain a new public key. |
| |
| Args: |
| test_type: A string identifying the test type. |
| expect_string: A string which is expected in the output. |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to |
| use. |
| boots: A boolean that is True if Linux should boot and False if |
| we are expected to not boot |
| fit: FIT filename to load and verify |
| """ |
| if not fit: |
| fit = '%stest.fit' % tmpdir |
| cons.restart_uboot() |
| with cons.log.section('Verified boot %s %s' % (sha_algo, test_type)): |
| output = cons.run_command_list( |
| ['host load hostfs - 100 %s' % fit, |
| 'fdt addr 100', |
| 'bootm 100']) |
| assert expect_string in ''.join(output) |
| if boots: |
| assert 'sandbox: continuing, as we cannot run' in ''.join(output) |
| else: |
| assert('sandbox: continuing, as we cannot run' |
| not in ''.join(output)) |
| |
| def sign_fit(sha_algo, options): |
| """Sign the FIT |
| |
| Signs the FIT and writes the signature into it. It also writes the |
| public key into the dtb. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to |
| use. |
| options: Options to provide to mkimage. |
| """ |
| args = [mkimage, '-F', '-k', tmpdir, '-K', dtb, '-r', fit] |
| if options: |
| args += options.split(' ') |
| cons.log.action('%s: Sign images' % sha_algo) |
| util.run_and_log(cons, args) |
| |
| def sign_fit_dtb(sha_algo, options, dtb): |
| """Sign the FIT |
| |
| Signs the FIT and writes the signature into it. It also writes the |
| public key into the dtb. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to |
| use. |
| options: Options to provide to mkimage. |
| """ |
| args = [mkimage, '-F', '-k', tmpdir, '-K', dtb, '-r', fit] |
| if options: |
| args += options.split(' ') |
| cons.log.action('%s: Sign images' % sha_algo) |
| util.run_and_log(cons, args) |
| |
| def sign_fit_norequire(sha_algo, options): |
| """Sign the FIT |
| |
| Signs the FIT and writes the signature into it. It also writes the |
| public key into the dtb. It does not mark key as 'required' in dtb. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to |
| use. |
| options: Options to provide to mkimage. |
| """ |
| args = [mkimage, '-F', '-k', tmpdir, '-K', dtb, fit] |
| if options: |
| args += options.split(' ') |
| cons.log.action('%s: Sign images' % sha_algo) |
| util.run_and_log(cons, args) |
| |
| def replace_fit_totalsize(size): |
| """Replace FIT header's totalsize with something greater. |
| |
| The totalsize must be less than or equal to FIT_SIGNATURE_MAX_SIZE. |
| If the size is greater, the signature verification should return false. |
| |
| Args: |
| size: The new totalsize of the header |
| |
| Returns: |
| prev_size: The previous totalsize read from the header |
| """ |
| total_size = 0 |
| with open(fit, 'r+b') as handle: |
| handle.seek(4) |
| total_size = handle.read(4) |
| handle.seek(4) |
| handle.write(struct.pack(">I", size)) |
| return struct.unpack(">I", total_size)[0] |
| |
| def corrupt_file(fit, offset, value): |
| """Corrupt a file |
| |
| To corrupt a file, a value is written at the specified offset |
| |
| Args: |
| fit: The file to corrupt |
| offset: Offset to write |
| value: Value written |
| """ |
| with open(fit, 'r+b') as handle: |
| handle.seek(offset) |
| handle.write(struct.pack(">I", value)) |
| |
| def create_rsa_pair(name): |
| """Generate a new RSA key paid and certificate |
| |
| Args: |
| name: Name of of the key (e.g. 'dev') |
| """ |
| public_exponent = 65537 |
| |
| if sha_algo == "sha384": |
| rsa_keygen_bits = 3072 |
| else: |
| rsa_keygen_bits = 2048 |
| |
| util.run_and_log(cons, 'openssl genpkey -algorithm RSA -out %s%s.key ' |
| '-pkeyopt rsa_keygen_bits:%d ' |
| '-pkeyopt rsa_keygen_pubexp:%d' % |
| (tmpdir, name, rsa_keygen_bits, public_exponent)) |
| |
| # Create a certificate containing the public key |
| util.run_and_log(cons, 'openssl req -batch -new -x509 -key %s%s.key ' |
| '-out %s%s.crt' % (tmpdir, name, tmpdir, name)) |
| |
| def test_with_algo(sha_algo, padding, sign_options): |
| """Test verified boot with the given hash algorithm. |
| |
| This is the main part of the test code. The same procedure is followed |
| for both hashing algorithms. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to |
| use. |
| padding: Either '' or '-pss', to select the padding to use for the |
| rsa signature algorithm. |
| sign_options: Options to mkimage when signing a fit image. |
| """ |
| # Compile our device tree files for kernel and U-Boot. These are |
| # regenerated here since mkimage will modify them (by adding a |
| # public key) below. |
| dtc('sandbox-kernel.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| dtc('sandbox-u-boot.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| |
| # Build the FIT, but don't sign anything yet |
| cons.log.action('%s: Test FIT with signed images' % sha_algo) |
| make_fit('sign-images-%s%s.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| run_bootm(sha_algo, 'unsigned images', ' - OK' if algo_arg else 'dev-', True) |
| |
| # Sign images with our dev keys |
| sign_fit(sha_algo, sign_options) |
| run_bootm(sha_algo, 'signed images', 'dev+', True) |
| |
| # Create a fresh .dtb without the public keys |
| dtc('sandbox-u-boot.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| |
| cons.log.action('%s: Test FIT with signed configuration' % sha_algo) |
| make_fit('sign-configs-%s%s.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| run_bootm(sha_algo, 'unsigned config', '%s+ OK' % ('sha256' if algo_arg else sha_algo), True) |
| |
| # Sign images with our dev keys |
| sign_fit(sha_algo, sign_options) |
| run_bootm(sha_algo, 'signed config', 'dev+', True) |
| |
| cons.log.action('%s: Check signed config on the host' % sha_algo) |
| |
| util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', dtb]) |
| |
| if full_test: |
| # Make sure that U-Boot checks that the config is in the list of |
| # hashed nodes. If it isn't, a security bypass is possible. |
| ffit = '%stest.forged.fit' % tmpdir |
| shutil.copyfile(fit, ffit) |
| with open(ffit, 'rb') as fd: |
| root, strblock = vboot_forge.read_fdt(fd) |
| root, strblock = vboot_forge.manipulate(root, strblock) |
| with open(ffit, 'w+b') as fd: |
| vboot_forge.write_fdt(root, strblock, fd) |
| util.run_and_log_expect_exception( |
| cons, [fit_check_sign, '-f', ffit, '-k', dtb], |
| 1, 'Failed to verify required signature') |
| |
| run_bootm(sha_algo, 'forged config', 'Bad Data Hash', False, ffit) |
| |
| # Try adding an evil root node. This should be detected. |
| efit = '%stest.evilf.fit' % tmpdir |
| shutil.copyfile(fit, efit) |
| vboot_evil.add_evil_node(fit, efit, evil_kernel, 'fakeroot') |
| |
| util.run_and_log_expect_exception( |
| cons, [fit_check_sign, '-f', efit, '-k', dtb], |
| 1, 'Failed to verify required signature') |
| run_bootm(sha_algo, 'evil fakeroot', 'Bad FIT kernel image format', |
| False, efit) |
| |
| # Try adding an @ to the kernel node name. This should be detected. |
| efit = '%stest.evilk.fit' % tmpdir |
| shutil.copyfile(fit, efit) |
| vboot_evil.add_evil_node(fit, efit, evil_kernel, 'kernel@') |
| |
| msg = 'Signature checking prevents use of unit addresses (@) in nodes' |
| util.run_and_log_expect_exception( |
| cons, [fit_check_sign, '-f', efit, '-k', dtb], |
| 1, msg) |
| run_bootm(sha_algo, 'evil kernel@', msg, False, efit) |
| |
| # Create a new properly signed fit and replace header bytes |
| make_fit('sign-configs-%s%s.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| sign_fit(sha_algo, sign_options) |
| bcfg = u_boot_console.config.buildconfig |
| max_size = int(bcfg.get('config_fit_signature_max_size', 0x10000000), 0) |
| existing_size = replace_fit_totalsize(max_size + 1) |
| run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', |
| False) |
| cons.log.action('%s: Check overflowed FIT header totalsize' % sha_algo) |
| |
| # Replace with existing header bytes |
| replace_fit_totalsize(existing_size) |
| run_bootm(sha_algo, 'signed config', 'dev+', True) |
| cons.log.action('%s: Check default FIT header totalsize' % sha_algo) |
| |
| # Increment the first byte of the signature, which should cause failure |
| sig = util.run_and_log(cons, 'fdtget -t bx %s %s value' % |
| (fit, sig_node)) |
| byte_list = sig.split() |
| byte = int(byte_list[0], 16) |
| byte_list[0] = '%x' % (byte + 1) |
| sig = ' '.join(byte_list) |
| util.run_and_log(cons, 'fdtput -t bx %s %s value %s' % |
| (fit, sig_node, sig)) |
| |
| run_bootm(sha_algo, 'Signed config with bad hash', 'Bad Data Hash', |
| False) |
| |
| cons.log.action('%s: Check bad config on the host' % sha_algo) |
| util.run_and_log_expect_exception( |
| cons, [fit_check_sign, '-f', fit, '-k', dtb], |
| 1, 'Failed to verify required signature') |
| |
| def test_required_key(sha_algo, padding, sign_options): |
| """Test verified boot with the given hash algorithm. |
| |
| This function tests if U-Boot rejects an image when a required key isn't |
| used to sign a FIT. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to use |
| padding: Either '' or '-pss', to select the padding to use for the |
| rsa signature algorithm. |
| sign_options: Options to mkimage when signing a fit image. |
| """ |
| # Compile our device tree files for kernel and U-Boot. These are |
| # regenerated here since mkimage will modify them (by adding a |
| # public key) below. |
| dtc('sandbox-kernel.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| dtc('sandbox-u-boot.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| |
| cons.log.action('%s: Test FIT with configs images' % sha_algo) |
| |
| # Build the FIT with prod key (keys required) and sign it. This puts the |
| # signature into sandbox-u-boot.dtb, marked 'required' |
| make_fit('sign-configs-%s%s-prod.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| sign_fit(sha_algo, sign_options) |
| |
| # Build the FIT with dev key (keys NOT required). This adds the |
| # signature into sandbox-u-boot.dtb, NOT marked 'required'. |
| make_fit('sign-configs-%s%s.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| sign_fit_norequire(sha_algo, sign_options) |
| |
| # So now sandbox-u-boot.dtb two signatures, for the prod and dev keys. |
| # Only the prod key is set as 'required'. But FIT we just built has |
| # a dev signature only (sign_fit_norequire() overwrites the FIT). |
| # Try to boot the FIT with dev key. This FIT should not be accepted by |
| # U-Boot because the prod key is required. |
| run_bootm(sha_algo, 'required key', '', False) |
| |
| # Build the FIT with dev key (keys required) and sign it. This puts the |
| # signature into sandbox-u-boot.dtb, marked 'required'. |
| make_fit('sign-configs-%s%s.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| sign_fit(sha_algo, sign_options) |
| |
| # Set the required-mode policy to "any". |
| # So now sandbox-u-boot.dtb two signatures, for the prod and dev keys. |
| # Both the dev and prod key are set as 'required'. But FIT we just built has |
| # a dev signature only (sign_fit() overwrites the FIT). |
| # Try to boot the FIT with dev key. This FIT should be accepted by |
| # U-Boot because the dev key is required and policy is "any" required key. |
| util.run_and_log(cons, 'fdtput -t s %s /signature required-mode any' % |
| (dtb)) |
| run_bootm(sha_algo, 'multi required key', 'dev+', True) |
| |
| # Set the required-mode policy to "all". |
| # So now sandbox-u-boot.dtb two signatures, for the prod and dev keys. |
| # Both the dev and prod key are set as 'required'. But FIT we just built has |
| # a dev signature only (sign_fit() overwrites the FIT). |
| # Try to boot the FIT with dev key. This FIT should not be accepted by |
| # U-Boot because the prod key is required and policy is "all" required key |
| util.run_and_log(cons, 'fdtput -t s %s /signature required-mode all' % |
| (dtb)) |
| run_bootm(sha_algo, 'multi required key', '', False) |
| |
| def test_global_sign(sha_algo, padding, sign_options): |
| """Test global image signature with the given hash algorithm and padding. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to use |
| padding: Either '' or '-pss', to select the padding to use for the |
| rsa signature algorithm. |
| """ |
| |
| dtb = '%ssandbox-u-boot-global%s.dtb' % (tmpdir, padding) |
| cons.config.dtb = dtb |
| |
| # Compile our device tree files for kernel and U-Boot. These are |
| # regenerated here since mkimage will modify them (by adding a |
| # public key) below. |
| dtc('sandbox-kernel.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| dtc_options('sandbox-u-boot-global%s.dts' % padding, '-p 1024') |
| |
| # Build the FIT with dev key (keys NOT required). This adds the |
| # signature into sandbox-u-boot.dtb, NOT marked 'required'. |
| make_fit('simple-images.its', cons, mkimage, dtc_args, datadir, fit) |
| sign_fit_dtb(sha_algo, '', dtb) |
| |
| # Build the dtb for binman that define the pre-load header |
| # with the global sigature. |
| dtc('sandbox-binman%s.dts' % padding, cons, dtc_args, datadir, tmpdir, dtb) |
| |
| # Run binman to create the final image with the not signed fit |
| # and the pre-load header that contains the global signature. |
| run_binman('sandbox-binman%s.dtb' % padding) |
| |
| # Check that the signature is correctly verified by u-boot |
| run_bootm(sha_algo, 'global image signature', |
| 'signature check has succeed', True, "%ssandbox.img" % tmpdir) |
| |
| # Corrupt the image (just one byte after the pre-load header) |
| corrupt_file("%ssandbox.img" % tmpdir, 4096, 255); |
| |
| # Check that the signature verification fails |
| run_bootm(sha_algo, 'global image signature', |
| 'signature check has failed', False, "%ssandbox.img" % tmpdir) |
| |
| # Check that the boot fails if the global signature is not provided |
| run_bootm(sha_algo, 'global image signature', 'signature is mandatory', False) |
| |
| cons = u_boot_console |
| tmpdir = os.path.join(cons.config.result_dir, name) + '/' |
| if not os.path.exists(tmpdir): |
| os.mkdir(tmpdir) |
| datadir = cons.config.source_dir + '/test/py/tests/vboot/' |
| fit = '%stest.fit' % tmpdir |
| mkimage = cons.config.build_dir + '/tools/mkimage' |
| binman = cons.config.source_dir + '/tools/binman/binman' |
| fit_check_sign = cons.config.build_dir + '/tools/fit_check_sign' |
| dtc_args = '-I dts -O dtb -i %s' % tmpdir |
| dtb = '%ssandbox-u-boot.dtb' % tmpdir |
| sig_node = '/configurations/conf-1/signature' |
| |
| create_rsa_pair('dev') |
| create_rsa_pair('prod') |
| |
| # Create a number kernel image with zeroes |
| with open('%stest-kernel.bin' % tmpdir, 'wb') as fd: |
| fd.write(500 * b'\0') |
| |
| # Create a second kernel image with ones |
| evil_kernel = '%stest-kernel1.bin' % tmpdir |
| with open(evil_kernel, 'wb') as fd: |
| fd.write(500 * b'\x01') |
| |
| # We need to use our own device tree file. Remember to restore it |
| # afterwards. |
| old_dtb = cons.config.dtb |
| try: |
| cons.config.dtb = dtb |
| if global_sign: |
| test_global_sign(sha_algo, padding, sign_options) |
| elif required: |
| test_required_key(sha_algo, padding, sign_options) |
| else: |
| test_with_algo(sha_algo, padding, sign_options) |
| finally: |
| # Go back to the original U-Boot with the correct dtb. |
| cons.config.dtb = old_dtb |
| cons.restart_uboot() |
| |
| |
| TESTDATA_IN = [ |
| ['sha1-basic', 'sha1', '', None, False], |
| ['sha1-pad', 'sha1', '', '-E -p 0x10000', False], |
| ['sha1-pss', 'sha1', '-pss', None, False], |
| ['sha1-pss-pad', 'sha1', '-pss', '-E -p 0x10000', False], |
| ['sha256-basic', 'sha256', '', None, False], |
| ['sha256-pad', 'sha256', '', '-E -p 0x10000', False], |
| ['sha256-pss', 'sha256', '-pss', None, False], |
| ['sha256-pss-pad', 'sha256', '-pss', '-E -p 0x10000', False], |
| ['sha256-pss-required', 'sha256', '-pss', None, False], |
| ['sha256-pss-pad-required', 'sha256', '-pss', '-E -p 0x10000', False], |
| ['sha384-basic', 'sha384', '', None, False], |
| ['sha384-pad', 'sha384', '', '-E -p 0x10000', False], |
| ['algo-arg', 'algo-arg', '', '-o sha256,rsa2048', True], |
| ['sha256-global-sign', 'sha256', '', '', False], |
| ['sha256-global-sign-pss', 'sha256', '-pss', '', False], |
| ] |
| |
| # Mark all but the first test as slow, so they are not run with '-k not slow' |
| TESTDATA = [TESTDATA_IN[0]] |
| TESTDATA += [pytest.param(*v, marks=pytest.mark.slow) for v in TESTDATA_IN[1:]] |
| |
| @pytest.mark.boardspec('sandbox') |
| @pytest.mark.buildconfigspec('fit_signature') |
| @pytest.mark.requiredtool('dtc') |
| @pytest.mark.requiredtool('openssl') |
| @pytest.mark.parametrize("name,sha_algo,padding,sign_options,algo_arg", TESTDATA) |
| def test_fdt_add_pubkey(u_boot_console, name, sha_algo, padding, sign_options, algo_arg): |
| """Test fdt_add_pubkey utility with bunch of different algo options.""" |
| |
| def sign_fit(sha_algo, options): |
| """Sign the FIT |
| |
| Signs the FIT and writes the signature into it. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to |
| use. |
| options: Options to provide to mkimage. |
| """ |
| args = [mkimage, '-F', '-k', tmpdir, fit] |
| if options: |
| args += options.split(' ') |
| cons.log.action('%s: Sign images' % sha_algo) |
| util.run_and_log(cons, args) |
| |
| def test_add_pubkey(sha_algo, padding, sign_options): |
| """Test fdt_add_pubkey utility with given hash algorithm and padding. |
| |
| This function tests if fdt_add_pubkey utility may add public keys into dtb. |
| |
| Args: |
| sha_algo: Either 'sha1' or 'sha256', to select the algorithm to use |
| padding: Either '' or '-pss', to select the padding to use for the |
| rsa signature algorithm. |
| sign_options: Options to mkimage when signing a fit image. |
| """ |
| |
| # Create a fresh .dtb without the public keys |
| dtc('sandbox-u-boot.dts', cons, dtc_args, datadir, tmpdir, dtb) |
| |
| cons.log.action('%s: Test fdt_add_pubkey with signed configuration' % sha_algo) |
| # Then add the dev key via the fdt_add_pubkey tool |
| util.run_and_log(cons, [fdt_add_pubkey, '-a', '%s,%s' % ('sha256' if algo_arg else sha_algo, \ |
| 'rsa3072' if sha_algo == 'sha384' else 'rsa2048'), |
| '-k', tmpdir, '-n', 'dev', '-r', 'conf', dtb]) |
| |
| make_fit('sign-configs-%s%s.its' % (sha_algo, padding), cons, mkimage, dtc_args, datadir, fit) |
| |
| # Sign images with our dev keys |
| sign_fit(sha_algo, sign_options) |
| |
| # Check with fit_check_sign that FIT is signed with key |
| util.run_and_log(cons, [fit_check_sign, '-f', fit, '-k', dtb]) |
| |
| cons = u_boot_console |
| tmpdir = os.path.join(cons.config.result_dir, name) + '/' |
| if not os.path.exists(tmpdir): |
| os.mkdir(tmpdir) |
| datadir = cons.config.source_dir + '/test/py/tests/vboot/' |
| fit = '%stest.fit' % tmpdir |
| mkimage = cons.config.build_dir + '/tools/mkimage' |
| binman = cons.config.source_dir + '/tools/binman/binman' |
| fit_check_sign = cons.config.build_dir + '/tools/fit_check_sign' |
| fdt_add_pubkey = cons.config.build_dir + '/tools/fdt_add_pubkey' |
| dtc_args = '-I dts -O dtb -i %s' % tmpdir |
| dtb = '%ssandbox-u-boot.dtb' % tmpdir |
| |
| # keys created in test_vboot test |
| |
| test_add_pubkey(sha_algo, padding, sign_options) |
