| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| */ |
| |
| /* |
| * Memory Functions |
| * |
| * Copied from FADS ROM, Dan Malek (dmalek@jlc.net) |
| */ |
| |
| #include <common.h> |
| #include <console.h> |
| #include <bootretry.h> |
| #include <cli.h> |
| #include <command.h> |
| #include <console.h> |
| #include <display_options.h> |
| #ifdef CONFIG_MTD_NOR_FLASH |
| #include <flash.h> |
| #endif |
| #include <hash.h> |
| #include <log.h> |
| #include <mapmem.h> |
| #include <rand.h> |
| #include <watchdog.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include <linux/compiler.h> |
| #include <linux/ctype.h> |
| #include <linux/delay.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Create a compile-time value */ |
| #if MEM_SUPPORT_64BIT_DATA |
| #define HELP_Q ", .q" |
| #else |
| #define HELP_Q "" |
| #endif |
| |
| static int mod_mem(struct cmd_tbl *, int, int, int, char * const []); |
| |
| /* Display values from last command. |
| * Memory modify remembered values are different from display memory. |
| */ |
| static ulong dp_last_addr, dp_last_size; |
| static ulong dp_last_length = 0x40; |
| static ulong mm_last_addr, mm_last_size; |
| |
| static ulong base_address = 0; |
| #ifdef CONFIG_CMD_MEM_SEARCH |
| static ulong dp_last_ms_length; |
| static u8 search_buf[64]; |
| static uint search_len; |
| #endif |
| |
| /* Memory Display |
| * |
| * Syntax: |
| * md{.b, .w, .l, .q} {addr} {len} |
| */ |
| #define DISP_LINE_LEN 16 |
| static int do_mem_md(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr, length, bytes; |
| const void *buf; |
| int size; |
| int rc = 0; |
| |
| /* We use the last specified parameters, unless new ones are |
| * entered. |
| */ |
| addr = dp_last_addr; |
| size = dp_last_size; |
| length = dp_last_length; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| if ((flag & CMD_FLAG_REPEAT) == 0) { |
| /* New command specified. Check for a size specification. |
| * Defaults to long if no or incorrect specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 0) |
| return 1; |
| |
| /* Address is specified since argc > 1 |
| */ |
| addr = hextoul(argv[1], NULL); |
| addr += base_address; |
| |
| /* If another parameter, it is the length to display. |
| * Length is the number of objects, not number of bytes. |
| */ |
| if (argc > 2) |
| length = hextoul(argv[2], NULL); |
| } |
| |
| bytes = size * length; |
| buf = map_sysmem(addr, bytes); |
| |
| /* Print the lines. */ |
| print_buffer(addr, buf, size, length, DISP_LINE_LEN / size); |
| addr += bytes; |
| unmap_sysmem(buf); |
| |
| dp_last_addr = addr; |
| dp_last_length = length; |
| dp_last_size = size; |
| return (rc); |
| } |
| |
| static int do_mem_mm(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| return mod_mem (cmdtp, 1, flag, argc, argv); |
| } |
| |
| static int do_mem_nm(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| return mod_mem (cmdtp, 0, flag, argc, argv); |
| } |
| |
| static int do_mem_mw(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong writeval; /* 64-bit if MEM_SUPPORT_64BIT_DATA */ |
| ulong addr, count; |
| int size; |
| void *buf, *start; |
| ulong bytes; |
| |
| if ((argc < 3) || (argc > 4)) |
| return CMD_RET_USAGE; |
| |
| /* Check for size specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 1) |
| return 1; |
| |
| /* Address is specified since argc > 1 |
| */ |
| addr = hextoul(argv[1], NULL); |
| addr += base_address; |
| |
| /* Get the value to write. |
| */ |
| if (MEM_SUPPORT_64BIT_DATA) |
| writeval = simple_strtoull(argv[2], NULL, 16); |
| else |
| writeval = hextoul(argv[2], NULL); |
| |
| /* Count ? */ |
| if (argc == 4) { |
| count = hextoul(argv[3], NULL); |
| } else { |
| count = 1; |
| } |
| |
| bytes = size * count; |
| start = map_sysmem(addr, bytes); |
| buf = start; |
| while (count-- > 0) { |
| if (size == 4) |
| *((u32 *)buf) = (u32)writeval; |
| else if (MEM_SUPPORT_64BIT_DATA && size == 8) |
| *((ulong *)buf) = writeval; |
| else if (size == 2) |
| *((u16 *)buf) = (u16)writeval; |
| else |
| *((u8 *)buf) = (u8)writeval; |
| buf += size; |
| } |
| unmap_sysmem(start); |
| return 0; |
| } |
| |
| #ifdef CONFIG_CMD_MX_CYCLIC |
| static int do_mem_mdc(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| int i; |
| ulong count; |
| |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| |
| count = dectoul(argv[3], NULL); |
| |
| for (;;) { |
| do_mem_md (NULL, 0, 3, argv); |
| |
| /* delay for <count> ms... */ |
| for (i=0; i<count; i++) |
| udelay(1000); |
| |
| /* check for ctrl-c to abort... */ |
| if (ctrlc()) { |
| puts("Abort\n"); |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int do_mem_mwc(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| int i; |
| ulong count; |
| |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| |
| count = dectoul(argv[3], NULL); |
| |
| for (;;) { |
| do_mem_mw (NULL, 0, 3, argv); |
| |
| /* delay for <count> ms... */ |
| for (i=0; i<count; i++) |
| udelay(1000); |
| |
| /* check for ctrl-c to abort... */ |
| if (ctrlc()) { |
| puts("Abort\n"); |
| return 0; |
| } |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_CMD_MX_CYCLIC */ |
| |
| static int do_mem_cmp(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr1, addr2, count, ngood, bytes; |
| int size; |
| int rcode = 0; |
| const char *type; |
| const void *buf1, *buf2, *base; |
| ulong word1, word2; /* 64-bit if MEM_SUPPORT_64BIT_DATA */ |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| |
| /* Check for size specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 0) |
| return 1; |
| type = size == 8 ? "double word" : |
| size == 4 ? "word" : |
| size == 2 ? "halfword" : "byte"; |
| |
| addr1 = hextoul(argv[1], NULL); |
| addr1 += base_address; |
| |
| addr2 = hextoul(argv[2], NULL); |
| addr2 += base_address; |
| |
| count = hextoul(argv[3], NULL); |
| |
| bytes = size * count; |
| base = buf1 = map_sysmem(addr1, bytes); |
| buf2 = map_sysmem(addr2, bytes); |
| for (ngood = 0; ngood < count; ++ngood) { |
| if (size == 4) { |
| word1 = *(u32 *)buf1; |
| word2 = *(u32 *)buf2; |
| } else if (MEM_SUPPORT_64BIT_DATA && size == 8) { |
| word1 = *(ulong *)buf1; |
| word2 = *(ulong *)buf2; |
| } else if (size == 2) { |
| word1 = *(u16 *)buf1; |
| word2 = *(u16 *)buf2; |
| } else { |
| word1 = *(u8 *)buf1; |
| word2 = *(u8 *)buf2; |
| } |
| if (word1 != word2) { |
| ulong offset = buf1 - base; |
| printf("%s at 0x%08lx (%#0*lx) != %s at 0x%08lx (%#0*lx)\n", |
| type, (ulong)(addr1 + offset), size, word1, |
| type, (ulong)(addr2 + offset), size, word2); |
| rcode = 1; |
| break; |
| } |
| |
| buf1 += size; |
| buf2 += size; |
| |
| /* reset watchdog from time to time */ |
| if ((ngood % (64 << 10)) == 0) |
| schedule(); |
| } |
| unmap_sysmem(buf1); |
| unmap_sysmem(buf2); |
| |
| printf("Total of %ld %s(s) were the same\n", ngood, type); |
| return rcode; |
| } |
| |
| static int do_mem_cp(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr, dest, count; |
| void *src, *dst; |
| int size; |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| |
| /* Check for size specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 0) |
| return 1; |
| |
| addr = hextoul(argv[1], NULL); |
| addr += base_address; |
| |
| dest = hextoul(argv[2], NULL); |
| dest += base_address; |
| |
| count = hextoul(argv[3], NULL); |
| |
| if (count == 0) { |
| puts ("Zero length ???\n"); |
| return 1; |
| } |
| |
| src = map_sysmem(addr, count * size); |
| dst = map_sysmem(dest, count * size); |
| |
| #ifdef CONFIG_MTD_NOR_FLASH |
| /* check if we are copying to Flash */ |
| if (addr2info((ulong)dst)) { |
| int rc; |
| |
| puts ("Copy to Flash... "); |
| |
| rc = flash_write((char *)src, (ulong)dst, count * size); |
| if (rc != 0) { |
| flash_perror(rc); |
| unmap_sysmem(src); |
| unmap_sysmem(dst); |
| return (1); |
| } |
| puts ("done\n"); |
| unmap_sysmem(src); |
| unmap_sysmem(dst); |
| return 0; |
| } |
| #endif |
| |
| memmove(dst, src, count * size); |
| |
| unmap_sysmem(src); |
| unmap_sysmem(dst); |
| return 0; |
| } |
| |
| #ifdef CONFIG_CMD_MEM_SEARCH |
| static int do_mem_search(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr, length, bytes, offset; |
| u8 *ptr, *end, *buf; |
| bool quiet = false; |
| ulong last_pos; /* Offset of last match in 'size' units*/ |
| ulong last_addr; /* Address of last displayed line */ |
| int limit = 10; |
| int used_len; |
| int count; |
| int size; |
| int i; |
| |
| /* We use the last specified parameters, unless new ones are entered */ |
| addr = dp_last_addr; |
| size = dp_last_size; |
| length = dp_last_ms_length; |
| |
| if (argc < 3) |
| return CMD_RET_USAGE; |
| |
| if (!(flag & CMD_FLAG_REPEAT)) { |
| /* |
| * Check for a size specification. |
| * Defaults to long if no or incorrect specification. |
| */ |
| size = cmd_get_data_size(argv[0], 4); |
| if (size < 0 && size != CMD_DATA_SIZE_STR) |
| return 1; |
| |
| argc--; |
| argv++; |
| while (argc && *argv[0] == '-') { |
| int ch = argv[0][1]; |
| |
| if (ch == 'q') |
| quiet = true; |
| else if (ch == 'l' && isxdigit(argv[0][2])) |
| limit = hextoul(argv[0] + 2, NULL); |
| else |
| return CMD_RET_USAGE; |
| argc--; |
| argv++; |
| } |
| |
| /* Address is specified since argc > 1 */ |
| addr = hextoul(argv[0], NULL); |
| addr += base_address; |
| |
| /* Length is the number of objects, not number of bytes */ |
| length = hextoul(argv[1], NULL); |
| |
| /* Read the bytes to search for */ |
| end = search_buf + sizeof(search_buf); |
| for (i = 2, ptr = search_buf; i < argc && ptr < end; i++) { |
| if (MEM_SUPPORT_64BIT_DATA && size == 8) { |
| u64 val = simple_strtoull(argv[i], NULL, 16); |
| |
| *(u64 *)ptr = val; |
| } else if (size == -2) { /* string */ |
| int len = min(strlen(argv[i]), |
| (size_t)(end - ptr)); |
| |
| memcpy(ptr, argv[i], len); |
| ptr += len; |
| continue; |
| } else { |
| u32 val = hextoul(argv[i], NULL); |
| |
| switch (size) { |
| case 1: |
| *ptr = val; |
| break; |
| case 2: |
| *(u16 *)ptr = val; |
| break; |
| case 4: |
| *(u32 *)ptr = val; |
| break; |
| } |
| } |
| ptr += size; |
| } |
| search_len = ptr - search_buf; |
| } |
| |
| /* Do the search */ |
| if (size == -2) |
| size = 1; |
| bytes = size * length; |
| buf = map_sysmem(addr, bytes); |
| last_pos = 0; |
| last_addr = 0; |
| count = 0; |
| for (offset = 0; |
| offset < bytes && offset <= bytes - search_len && count < limit; |
| offset += size) { |
| void *ptr = buf + offset; |
| |
| if (!memcmp(ptr, search_buf, search_len)) { |
| uint align = (addr + offset) & 0xf; |
| ulong match = addr + offset; |
| |
| if (!count || (last_addr & ~0xf) != (match & ~0xf)) { |
| if (!quiet) { |
| if (count) |
| printf("--\n"); |
| print_buffer(match - align, ptr - align, |
| size, |
| ALIGN(search_len + align, |
| 16) / size, 0); |
| } |
| last_addr = match; |
| last_pos = offset / size; |
| } |
| count++; |
| } |
| } |
| if (!quiet) { |
| printf("%d match%s", count, count == 1 ? "" : "es"); |
| if (count == limit) |
| printf(" (repeat command to check for more)"); |
| printf("\n"); |
| } |
| env_set_hex("memmatches", count); |
| env_set_hex("memaddr", last_addr); |
| env_set_hex("mempos", last_pos); |
| |
| unmap_sysmem(buf); |
| |
| used_len = offset / size; |
| dp_last_addr = addr + used_len; |
| dp_last_size = size; |
| dp_last_ms_length = length < used_len ? 0 : length - used_len; |
| |
| return count ? 0 : CMD_RET_FAILURE; |
| } |
| #endif |
| |
| static int do_mem_base(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| if (argc > 1) { |
| /* Set new base address. |
| */ |
| base_address = hextoul(argv[1], NULL); |
| } |
| /* Print the current base address. |
| */ |
| printf("Base Address: 0x%08lx\n", base_address); |
| return 0; |
| } |
| |
| static int do_mem_loop(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr, length, i, bytes; |
| int size; |
| volatile ulong *llp; /* 64-bit if MEM_SUPPORT_64BIT_DATA */ |
| volatile u32 *longp; |
| volatile u16 *shortp; |
| volatile u8 *cp; |
| const void *buf; |
| |
| if (argc < 3) |
| return CMD_RET_USAGE; |
| |
| /* |
| * Check for a size specification. |
| * Defaults to long if no or incorrect specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 0) |
| return 1; |
| |
| /* Address is always specified. |
| */ |
| addr = hextoul(argv[1], NULL); |
| |
| /* Length is the number of objects, not number of bytes. |
| */ |
| length = hextoul(argv[2], NULL); |
| |
| bytes = size * length; |
| buf = map_sysmem(addr, bytes); |
| |
| /* We want to optimize the loops to run as fast as possible. |
| * If we have only one object, just run infinite loops. |
| */ |
| if (length == 1) { |
| if (MEM_SUPPORT_64BIT_DATA && size == 8) { |
| llp = (ulong *)buf; |
| for (;;) |
| i = *llp; |
| } |
| if (size == 4) { |
| longp = (u32 *)buf; |
| for (;;) |
| i = *longp; |
| } |
| if (size == 2) { |
| shortp = (u16 *)buf; |
| for (;;) |
| i = *shortp; |
| } |
| cp = (u8 *)buf; |
| for (;;) |
| i = *cp; |
| } |
| |
| if (MEM_SUPPORT_64BIT_DATA && size == 8) { |
| for (;;) { |
| llp = (ulong *)buf; |
| i = length; |
| while (i-- > 0) |
| *llp++; |
| } |
| } |
| if (size == 4) { |
| for (;;) { |
| longp = (u32 *)buf; |
| i = length; |
| while (i-- > 0) |
| *longp++; |
| } |
| } |
| if (size == 2) { |
| for (;;) { |
| shortp = (u16 *)buf; |
| i = length; |
| while (i-- > 0) |
| *shortp++; |
| } |
| } |
| for (;;) { |
| cp = (u8 *)buf; |
| i = length; |
| while (i-- > 0) |
| *cp++; |
| } |
| unmap_sysmem(buf); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_LOOPW |
| static int do_mem_loopw(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr, length, i, bytes; |
| int size; |
| volatile ulong *llp; /* 64-bit if MEM_SUPPORT_64BIT_DATA */ |
| ulong data; /* 64-bit if MEM_SUPPORT_64BIT_DATA */ |
| volatile u32 *longp; |
| volatile u16 *shortp; |
| volatile u8 *cp; |
| void *buf; |
| |
| if (argc < 4) |
| return CMD_RET_USAGE; |
| |
| /* |
| * Check for a size specification. |
| * Defaults to long if no or incorrect specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 0) |
| return 1; |
| |
| /* Address is always specified. |
| */ |
| addr = hextoul(argv[1], NULL); |
| |
| /* Length is the number of objects, not number of bytes. |
| */ |
| length = hextoul(argv[2], NULL); |
| |
| /* data to write */ |
| if (MEM_SUPPORT_64BIT_DATA) |
| data = simple_strtoull(argv[3], NULL, 16); |
| else |
| data = hextoul(argv[3], NULL); |
| |
| bytes = size * length; |
| buf = map_sysmem(addr, bytes); |
| |
| /* We want to optimize the loops to run as fast as possible. |
| * If we have only one object, just run infinite loops. |
| */ |
| if (length == 1) { |
| if (MEM_SUPPORT_64BIT_DATA && size == 8) { |
| llp = (ulong *)buf; |
| for (;;) |
| *llp = data; |
| } |
| if (size == 4) { |
| longp = (u32 *)buf; |
| for (;;) |
| *longp = data; |
| } |
| if (size == 2) { |
| shortp = (u16 *)buf; |
| for (;;) |
| *shortp = data; |
| } |
| cp = (u8 *)buf; |
| for (;;) |
| *cp = data; |
| } |
| |
| if (MEM_SUPPORT_64BIT_DATA && size == 8) { |
| for (;;) { |
| llp = (ulong *)buf; |
| i = length; |
| while (i-- > 0) |
| *llp++ = data; |
| } |
| } |
| if (size == 4) { |
| for (;;) { |
| longp = (u32 *)buf; |
| i = length; |
| while (i-- > 0) |
| *longp++ = data; |
| } |
| } |
| if (size == 2) { |
| for (;;) { |
| shortp = (u16 *)buf; |
| i = length; |
| while (i-- > 0) |
| *shortp++ = data; |
| } |
| } |
| for (;;) { |
| cp = (u8 *)buf; |
| i = length; |
| while (i-- > 0) |
| *cp++ = data; |
| } |
| } |
| #endif /* CONFIG_LOOPW */ |
| |
| #ifdef CONFIG_CMD_MEMTEST |
| static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr, |
| vu_long *dummy) |
| { |
| vu_long *addr; |
| ulong errs = 0; |
| ulong val, readback; |
| int j; |
| vu_long offset; |
| vu_long test_offset; |
| vu_long pattern; |
| vu_long temp; |
| vu_long anti_pattern; |
| vu_long num_words; |
| static const ulong bitpattern[] = { |
| 0x00000001, /* single bit */ |
| 0x00000003, /* two adjacent bits */ |
| 0x00000007, /* three adjacent bits */ |
| 0x0000000F, /* four adjacent bits */ |
| 0x00000005, /* two non-adjacent bits */ |
| 0x00000015, /* three non-adjacent bits */ |
| 0x00000055, /* four non-adjacent bits */ |
| 0xaaaaaaaa, /* alternating 1/0 */ |
| }; |
| |
| num_words = (end_addr - start_addr) / sizeof(vu_long); |
| |
| /* |
| * Data line test: write a pattern to the first |
| * location, write the 1's complement to a 'parking' |
| * address (changes the state of the data bus so a |
| * floating bus doesn't give a false OK), and then |
| * read the value back. Note that we read it back |
| * into a variable because the next time we read it, |
| * it might be right (been there, tough to explain to |
| * the quality guys why it prints a failure when the |
| * "is" and "should be" are obviously the same in the |
| * error message). |
| * |
| * Rather than exhaustively testing, we test some |
| * patterns by shifting '1' bits through a field of |
| * '0's and '0' bits through a field of '1's (i.e. |
| * pattern and ~pattern). |
| */ |
| addr = buf; |
| for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]); j++) { |
| val = bitpattern[j]; |
| for (; val != 0; val <<= 1) { |
| *addr = val; |
| *dummy = ~val; /* clear the test data off the bus */ |
| readback = *addr; |
| if (readback != val) { |
| printf("FAILURE (data line): " |
| "expected %08lx, actual %08lx\n", |
| val, readback); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| *addr = ~val; |
| *dummy = val; |
| readback = *addr; |
| if (readback != ~val) { |
| printf("FAILURE (data line): " |
| "Is %08lx, should be %08lx\n", |
| readback, ~val); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| } |
| } |
| |
| /* |
| * Based on code whose Original Author and Copyright |
| * information follows: Copyright (c) 1998 by Michael |
| * Barr. This software is placed into the public |
| * domain and may be used for any purpose. However, |
| * this notice must not be changed or removed and no |
| * warranty is either expressed or implied by its |
| * publication or distribution. |
| */ |
| |
| /* |
| * Address line test |
| |
| * Description: Test the address bus wiring in a |
| * memory region by performing a walking |
| * 1's test on the relevant bits of the |
| * address and checking for aliasing. |
| * This test will find single-bit |
| * address failures such as stuck-high, |
| * stuck-low, and shorted pins. The base |
| * address and size of the region are |
| * selected by the caller. |
| |
| * Notes: For best results, the selected base |
| * address should have enough LSB 0's to |
| * guarantee single address bit changes. |
| * For example, to test a 64-Kbyte |
| * region, select a base address on a |
| * 64-Kbyte boundary. Also, select the |
| * region size as a power-of-two if at |
| * all possible. |
| * |
| * Returns: 0 if the test succeeds, 1 if the test fails. |
| */ |
| pattern = (vu_long)0xaaaaaaaaaaaaaaaa; |
| anti_pattern = (vu_long)0x5555555555555555; |
| |
| debug("%s:%d: length = 0x%.8lx\n", __func__, __LINE__, num_words); |
| /* |
| * Write the default pattern at each of the |
| * power-of-two offsets. |
| */ |
| for (offset = 1; offset < num_words; offset <<= 1) |
| addr[offset] = pattern; |
| |
| /* |
| * Check for address bits stuck high. |
| */ |
| test_offset = 0; |
| addr[test_offset] = anti_pattern; |
| |
| for (offset = 1; offset < num_words; offset <<= 1) { |
| temp = addr[offset]; |
| if (temp != pattern) { |
| printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:" |
| " expected 0x%.8lx, actual 0x%.8lx\n", |
| start_addr + offset*sizeof(vu_long), |
| pattern, temp); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| } |
| addr[test_offset] = pattern; |
| schedule(); |
| |
| /* |
| * Check for addr bits stuck low or shorted. |
| */ |
| for (test_offset = 1; test_offset < num_words; test_offset <<= 1) { |
| addr[test_offset] = anti_pattern; |
| |
| for (offset = 1; offset < num_words; offset <<= 1) { |
| temp = addr[offset]; |
| if ((temp != pattern) && (offset != test_offset)) { |
| printf("\nFAILURE: Address bit stuck low or" |
| " shorted @ 0x%.8lx: expected 0x%.8lx," |
| " actual 0x%.8lx\n", |
| start_addr + offset*sizeof(vu_long), |
| pattern, temp); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| } |
| addr[test_offset] = pattern; |
| } |
| |
| /* |
| * Description: Test the integrity of a physical |
| * memory device by performing an |
| * increment/decrement test over the |
| * entire region. In the process every |
| * storage bit in the device is tested |
| * as a zero and a one. The base address |
| * and the size of the region are |
| * selected by the caller. |
| * |
| * Returns: 0 if the test succeeds, 1 if the test fails. |
| */ |
| num_words++; |
| |
| /* |
| * Fill memory with a known pattern. |
| */ |
| for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { |
| schedule(); |
| addr[offset] = pattern; |
| } |
| |
| /* |
| * Check each location and invert it for the second pass. |
| */ |
| for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { |
| schedule(); |
| temp = addr[offset]; |
| if (temp != pattern) { |
| printf("\nFAILURE (read/write) @ 0x%.8lx:" |
| " expected 0x%.8lx, actual 0x%.8lx)\n", |
| start_addr + offset*sizeof(vu_long), |
| pattern, temp); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| |
| anti_pattern = ~pattern; |
| addr[offset] = anti_pattern; |
| } |
| |
| /* |
| * Check each location for the inverted pattern and zero it. |
| */ |
| for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { |
| schedule(); |
| anti_pattern = ~pattern; |
| temp = addr[offset]; |
| if (temp != anti_pattern) { |
| printf("\nFAILURE (read/write): @ 0x%.8lx:" |
| " expected 0x%.8lx, actual 0x%.8lx)\n", |
| start_addr + offset*sizeof(vu_long), |
| anti_pattern, temp); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| addr[offset] = 0; |
| } |
| |
| return errs; |
| } |
| |
| static int compare_regions(volatile unsigned long *bufa, |
| volatile unsigned long *bufb, size_t count) |
| { |
| volatile unsigned long *p1 = bufa; |
| volatile unsigned long *p2 = bufb; |
| int errs = 0; |
| size_t i; |
| |
| for (i = 0; i < count; i++, p1++, p2++) { |
| if (*p1 != *p2) { |
| printf("FAILURE: 0x%08lx != 0x%08lx (delta=0x%08lx -> bit %ld) at offset 0x%08lx\n", |
| (unsigned long)*p1, (unsigned long)*p2, |
| *p1 ^ *p2, __ffs(*p1 ^ *p2), |
| (unsigned long)(i * sizeof(unsigned long))); |
| errs++; |
| } |
| } |
| |
| return errs; |
| } |
| |
| static ulong test_bitflip_comparison(volatile unsigned long *bufa, |
| volatile unsigned long *bufb, size_t count) |
| { |
| volatile unsigned long *p1 = bufa; |
| volatile unsigned long *p2 = bufb; |
| unsigned int j, k; |
| unsigned long q; |
| size_t i; |
| int max; |
| int errs = 0; |
| |
| max = sizeof(unsigned long) * 8; |
| for (k = 0; k < max; k++) { |
| q = 1UL << k; |
| for (j = 0; j < 8; j++) { |
| schedule(); |
| q = ~q; |
| p1 = (volatile unsigned long *)bufa; |
| p2 = (volatile unsigned long *)bufb; |
| for (i = 0; i < count; i++) |
| *p1++ = *p2++ = (i % 2) == 0 ? q : ~q; |
| |
| errs += compare_regions(bufa, bufb, count); |
| } |
| |
| if (ctrlc()) |
| return -1UL; |
| } |
| |
| return errs; |
| } |
| |
| static ulong mem_test_bitflip(vu_long *buf, ulong start, ulong end) |
| { |
| /* |
| * Split the specified range into two halves. |
| * Note that mtest range is inclusive of start,end. |
| * Bitflip test instead uses a count (of 32-bit words). |
| */ |
| ulong half_size = (end - start + 1) / 2 / sizeof(unsigned long); |
| |
| return test_bitflip_comparison(buf, buf + half_size, half_size); |
| } |
| |
| static ulong mem_test_quick(vu_long *buf, ulong start_addr, ulong end_addr, |
| vu_long pattern, int iteration) |
| { |
| vu_long *end; |
| vu_long *addr; |
| ulong errs = 0; |
| ulong incr, length; |
| ulong val, readback; |
| const int plen = 2 * sizeof(ulong); |
| |
| /* Alternate the pattern */ |
| incr = 1; |
| if (iteration & 1) { |
| incr = -incr; |
| /* |
| * Flip the pattern each time to make lots of zeros and |
| * then, the next time, lots of ones. We decrement |
| * the "negative" patterns and increment the "positive" |
| * patterns to preserve this feature. |
| */ |
| if (pattern > (ulong)LONG_MAX) |
| pattern = -pattern; /* complement & increment */ |
| else |
| pattern = ~pattern; |
| } |
| length = (end_addr - start_addr) / sizeof(ulong); |
| end = buf + length; |
| printf("\rPattern %0*lX Writing..." |
| "%12s" |
| "\b\b\b\b\b\b\b\b\b\b", |
| plen, pattern, ""); |
| |
| for (addr = buf, val = pattern; addr < end; addr++) { |
| schedule(); |
| *addr = val; |
| val += incr; |
| } |
| |
| puts("Reading..."); |
| |
| for (addr = buf, val = pattern; addr < end; addr++) { |
| schedule(); |
| readback = *addr; |
| if (readback != val) { |
| ulong offset = addr - buf; |
| |
| printf("\nMem error @ 0x%0*lX: found %0*lX, expected %0*lX\n", |
| plen, start_addr + offset * sizeof(vu_long), |
| plen, readback, plen, val); |
| errs++; |
| if (ctrlc()) |
| return -1; |
| } |
| val += incr; |
| } |
| |
| return errs; |
| } |
| |
| /* |
| * Perform a memory test. A more complete alternative test can be |
| * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until |
| * interrupted by ctrl-c or by a failure of one of the sub-tests. |
| */ |
| static int do_mem_mtest(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong start, end; |
| vu_long scratch_space; |
| vu_long *buf, *dummy = &scratch_space; |
| ulong iteration_limit = 0; |
| ulong count = 0; |
| ulong errs = 0; /* number of errors, or -1 if interrupted */ |
| ulong pattern = 0; |
| int iteration; |
| |
| start = CONFIG_SYS_MEMTEST_START; |
| end = CONFIG_SYS_MEMTEST_END; |
| |
| if (argc > 1) |
| if (strict_strtoul(argv[1], 16, &start) < 0) |
| return CMD_RET_USAGE; |
| |
| if (argc > 2) |
| if (strict_strtoul(argv[2], 16, &end) < 0) |
| return CMD_RET_USAGE; |
| |
| if (argc > 3) |
| if (strict_strtoul(argv[3], 16, &pattern) < 0) |
| return CMD_RET_USAGE; |
| |
| if (argc > 4) |
| if (strict_strtoul(argv[4], 16, &iteration_limit) < 0) |
| return CMD_RET_USAGE; |
| |
| if (end < start) { |
| printf("Refusing to do empty test\n"); |
| return -1; |
| } |
| |
| printf("Testing %08lx ... %08lx:\n", start, end); |
| debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__, |
| start, end); |
| |
| buf = map_sysmem(start, end - start); |
| for (iteration = 0; |
| !iteration_limit || iteration < iteration_limit; |
| iteration++) { |
| if (ctrlc()) { |
| errs = -1UL; |
| break; |
| } |
| |
| printf("Iteration: %6d\r", iteration + 1); |
| debug("\n"); |
| if (IS_ENABLED(CONFIG_SYS_ALT_MEMTEST)) { |
| errs = mem_test_alt(buf, start, end, dummy); |
| if (errs == -1UL) |
| break; |
| if (IS_ENABLED(CONFIG_SYS_ALT_MEMTEST_BITFLIP)) { |
| count += errs; |
| errs = mem_test_bitflip(buf, start, end); |
| } |
| } else { |
| errs = mem_test_quick(buf, start, end, pattern, |
| iteration); |
| } |
| if (errs == -1UL) |
| break; |
| count += errs; |
| } |
| |
| unmap_sysmem((void *)buf); |
| |
| printf("\nTested %d iteration(s) with %lu errors.\n", iteration, count); |
| |
| return errs != 0; |
| } |
| #endif /* CONFIG_CMD_MEMTEST */ |
| |
| /* Modify memory. |
| * |
| * Syntax: |
| * mm{.b, .w, .l, .q} {addr} |
| */ |
| static int |
| mod_mem(struct cmd_tbl *cmdtp, int incrflag, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr; |
| ulong i; /* 64-bit if MEM_SUPPORT_64BIT_DATA */ |
| int nbytes, size; |
| void *ptr = NULL; |
| |
| if (argc != 2) |
| return CMD_RET_USAGE; |
| |
| bootretry_reset_cmd_timeout(); /* got a good command to get here */ |
| /* We use the last specified parameters, unless new ones are |
| * entered. |
| */ |
| addr = mm_last_addr; |
| size = mm_last_size; |
| |
| if ((flag & CMD_FLAG_REPEAT) == 0) { |
| /* New command specified. Check for a size specification. |
| * Defaults to long if no or incorrect specification. |
| */ |
| if ((size = cmd_get_data_size(argv[0], 4)) < 0) |
| return 1; |
| |
| /* Address is specified since argc > 1 |
| */ |
| addr = hextoul(argv[1], NULL); |
| addr += base_address; |
| } |
| |
| /* Print the address, followed by value. Then accept input for |
| * the next value. A non-converted value exits. |
| */ |
| do { |
| ptr = map_sysmem(addr, size); |
| printf("%08lx:", addr); |
| if (size == 4) |
| printf(" %08x", *((u32 *)ptr)); |
| else if (MEM_SUPPORT_64BIT_DATA && size == 8) |
| printf(" %0lx", *((ulong *)ptr)); |
| else if (size == 2) |
| printf(" %04x", *((u16 *)ptr)); |
| else |
| printf(" %02x", *((u8 *)ptr)); |
| |
| nbytes = cli_readline(" ? "); |
| if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { |
| /* <CR> pressed as only input, don't modify current |
| * location and move to next. "-" pressed will go back. |
| */ |
| if (incrflag) |
| addr += nbytes ? -size : size; |
| nbytes = 1; |
| /* good enough to not time out */ |
| bootretry_reset_cmd_timeout(); |
| } |
| #ifdef CONFIG_BOOT_RETRY_TIME |
| else if (nbytes == -2) { |
| break; /* timed out, exit the command */ |
| } |
| #endif |
| else { |
| char *endp; |
| if (MEM_SUPPORT_64BIT_DATA) |
| i = simple_strtoull(console_buffer, &endp, 16); |
| else |
| i = hextoul(console_buffer, &endp); |
| nbytes = endp - console_buffer; |
| if (nbytes) { |
| /* good enough to not time out |
| */ |
| bootretry_reset_cmd_timeout(); |
| if (size == 4) |
| *((u32 *)ptr) = i; |
| else if (MEM_SUPPORT_64BIT_DATA && size == 8) |
| *((ulong *)ptr) = i; |
| else if (size == 2) |
| *((u16 *)ptr) = i; |
| else |
| *((u8 *)ptr) = i; |
| if (incrflag) |
| addr += size; |
| } |
| } |
| } while (nbytes); |
| if (ptr) |
| unmap_sysmem(ptr); |
| |
| mm_last_addr = addr; |
| mm_last_size = size; |
| return 0; |
| } |
| |
| #ifdef CONFIG_CMD_CRC32 |
| |
| static int do_mem_crc(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| int flags = 0; |
| int ac; |
| char * const *av; |
| |
| if (argc < 3) |
| return CMD_RET_USAGE; |
| |
| av = argv + 1; |
| ac = argc - 1; |
| #ifdef CONFIG_CRC32_VERIFY |
| if (strcmp(*av, "-v") == 0) { |
| flags |= HASH_FLAG_VERIFY | HASH_FLAG_ENV; |
| av++; |
| ac--; |
| } |
| #endif |
| |
| return hash_command("crc32", flags, cmdtp, flag, ac, av); |
| } |
| |
| #endif |
| |
| #ifdef CONFIG_CMD_RANDOM |
| static int do_random(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| unsigned long addr, len; |
| unsigned long seed; // NOT INITIALIZED ON PURPOSE |
| unsigned int *buf, *start; |
| unsigned char *buf8; |
| unsigned int i; |
| |
| if (argc < 3 || argc > 4) |
| return CMD_RET_USAGE; |
| |
| len = hextoul(argv[2], NULL); |
| addr = hextoul(argv[1], NULL); |
| |
| if (argc == 4) { |
| seed = hextoul(argv[3], NULL); |
| if (seed == 0) { |
| printf("The seed cannot be 0. Using 0xDEADBEEF.\n"); |
| seed = 0xDEADBEEF; |
| } |
| } else { |
| seed = get_timer(0) ^ rand(); |
| } |
| |
| srand(seed); |
| start = map_sysmem(addr, len); |
| buf = start; |
| for (i = 0; i < (len / 4); i++) |
| *buf++ = rand(); |
| |
| buf8 = (unsigned char *)buf; |
| for (i = 0; i < (len % 4); i++) |
| *buf8++ = rand() & 0xFF; |
| |
| unmap_sysmem(start); |
| printf("%lu bytes filled with random data\n", len); |
| |
| return CMD_RET_SUCCESS; |
| } |
| #endif |
| |
| /**************************************************/ |
| U_BOOT_CMD( |
| md, 3, 1, do_mem_md, |
| "memory display", |
| "[.b, .w, .l" HELP_Q "] address [# of objects]" |
| ); |
| |
| |
| U_BOOT_CMD( |
| mm, 2, 1, do_mem_mm, |
| "memory modify (auto-incrementing address)", |
| "[.b, .w, .l" HELP_Q "] address" |
| ); |
| |
| |
| U_BOOT_CMD( |
| nm, 2, 1, do_mem_nm, |
| "memory modify (constant address)", |
| "[.b, .w, .l" HELP_Q "] address" |
| ); |
| |
| U_BOOT_CMD( |
| mw, 4, 1, do_mem_mw, |
| "memory write (fill)", |
| "[.b, .w, .l" HELP_Q "] address value [count]" |
| ); |
| |
| U_BOOT_CMD( |
| cp, 4, 1, do_mem_cp, |
| "memory copy", |
| "[.b, .w, .l" HELP_Q "] source target count" |
| ); |
| |
| U_BOOT_CMD( |
| cmp, 4, 1, do_mem_cmp, |
| "memory compare", |
| "[.b, .w, .l" HELP_Q "] addr1 addr2 count" |
| ); |
| |
| #ifdef CONFIG_CMD_MEM_SEARCH |
| /**************************************************/ |
| U_BOOT_CMD( |
| ms, 255, 1, do_mem_search, |
| "memory search", |
| "[.b, .w, .l" HELP_Q ", .s] [-q | -<n>] address #-of-objects <value>..." |
| " -q = quiet, -l<val> = match limit" |
| ); |
| #endif |
| |
| #ifdef CONFIG_CMD_CRC32 |
| |
| #ifndef CONFIG_CRC32_VERIFY |
| |
| U_BOOT_CMD( |
| crc32, 4, 1, do_mem_crc, |
| "checksum calculation", |
| "address count [addr]\n - compute CRC32 checksum [save at addr]" |
| ); |
| |
| #else /* CONFIG_CRC32_VERIFY */ |
| |
| U_BOOT_CMD( |
| crc32, 5, 1, do_mem_crc, |
| "checksum calculation", |
| "address count [addr]\n - compute CRC32 checksum [save at addr]\n" |
| "-v address count crc\n - verify crc of memory area" |
| ); |
| |
| #endif /* CONFIG_CRC32_VERIFY */ |
| |
| #endif |
| |
| #ifdef CONFIG_CMD_MEMINFO |
| static int do_mem_info(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| puts("DRAM: "); |
| print_size(gd->ram_size, "\n"); |
| |
| return 0; |
| } |
| #endif |
| |
| U_BOOT_CMD( |
| base, 2, 1, do_mem_base, |
| "print or set address offset", |
| "\n - print address offset for memory commands\n" |
| "base off\n - set address offset for memory commands to 'off'" |
| ); |
| |
| U_BOOT_CMD( |
| loop, 3, 1, do_mem_loop, |
| "infinite loop on address range", |
| "[.b, .w, .l" HELP_Q "] address number_of_objects" |
| ); |
| |
| #ifdef CONFIG_LOOPW |
| U_BOOT_CMD( |
| loopw, 4, 1, do_mem_loopw, |
| "infinite write loop on address range", |
| "[.b, .w, .l" HELP_Q "] address number_of_objects data_to_write" |
| ); |
| #endif /* CONFIG_LOOPW */ |
| |
| #ifdef CONFIG_CMD_MEMTEST |
| U_BOOT_CMD( |
| mtest, 5, 1, do_mem_mtest, |
| "simple RAM read/write test", |
| "[start [end [pattern [iterations]]]]" |
| ); |
| #endif /* CONFIG_CMD_MEMTEST */ |
| |
| #ifdef CONFIG_CMD_MX_CYCLIC |
| U_BOOT_CMD( |
| mdc, 4, 1, do_mem_mdc, |
| "memory display cyclic", |
| "[.b, .w, .l" HELP_Q "] address count delay(ms)" |
| ); |
| |
| U_BOOT_CMD( |
| mwc, 4, 1, do_mem_mwc, |
| "memory write cyclic", |
| "[.b, .w, .l" HELP_Q "] address value delay(ms)" |
| ); |
| #endif /* CONFIG_CMD_MX_CYCLIC */ |
| |
| #ifdef CONFIG_CMD_MEMINFO |
| U_BOOT_CMD( |
| meminfo, 3, 1, do_mem_info, |
| "display memory information", |
| "" |
| ); |
| #endif |
| |
| #ifdef CONFIG_CMD_RANDOM |
| U_BOOT_CMD( |
| random, 4, 0, do_random, |
| "fill memory with random pattern", |
| "<addr> <len> [<seed>]\n" |
| " - Fill 'len' bytes of memory starting at 'addr' with random data\n" |
| ); |
| #endif |