blob: e3de73082150244ef58e92a633db596b486c25e8 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2011-2013
* Texas Instruments, <www.ti.com>
*/
#include <common.h>
#include <i2c.h>
#include <power/tps65910.h>
struct udevice *tps65910_dev __section(".data") = NULL;
static inline int tps65910_read_reg(int addr, uchar *buf)
{
#if !CONFIG_IS_ENABLED(DM_I2C)
return i2c_read(TPS65910_CTRL_I2C_ADDR, addr, 1, buf, 1);
#else
int rc;
rc = dm_i2c_reg_read(tps65910_dev, addr);
if (rc < 0)
return rc;
*buf = (uchar)rc;
return 0;
#endif
}
static inline int tps65910_write_reg(int addr, uchar *buf)
{
#if !CONFIG_IS_ENABLED(DM_I2C)
return i2c_write(TPS65910_CTRL_I2C_ADDR, addr, 1, buf, 1);
#else
return dm_i2c_reg_write(tps65910_dev, addr, *buf);
#endif
}
int power_tps65910_init(unsigned char bus)
{
#if CONFIG_IS_ENABLED(DM_I2C)
struct udevice *dev = NULL;
int rc;
rc = i2c_get_chip_for_busnum(bus, TPS65910_CTRL_I2C_ADDR, 1, &dev);
if (rc)
return rc;
tps65910_dev = dev;
#endif
return 0;
}
/*
* tps65910_set_i2c_control() - Set the TPS65910 to be controlled via the I2C
* interface.
* @return: 0 on success, not 0 on failure
*/
int tps65910_set_i2c_control(void)
{
int ret;
uchar buf;
/* VDD1/2 voltage selection register access by control i/f */
ret = tps65910_read_reg(TPS65910_DEVCTRL_REG, &buf);
if (ret)
return ret;
buf |= TPS65910_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C;
return tps65910_write_reg(TPS65910_DEVCTRL_REG, &buf);
}
/*
* tps65910_voltage_update() - Voltage switching for MPU frequency switching.
* @module: mpu - 0, core - 1
* @vddx_op_vol_sel: vdd voltage to set
* @return: 0 on success, not 0 on failure
*/
int tps65910_voltage_update(unsigned int module, unsigned char vddx_op_vol_sel)
{
uchar buf;
unsigned int reg_offset;
int ret;
if (module == MPU)
reg_offset = TPS65910_VDD1_OP_REG;
else
reg_offset = TPS65910_VDD2_OP_REG;
/* Select VDDx OP */
ret = tps65910_read_reg(reg_offset, &buf);
if (ret)
return ret;
buf &= ~TPS65910_OP_REG_CMD_MASK;
ret = tps65910_write_reg(reg_offset, &buf);
if (ret)
return ret;
/* Configure VDDx OP Voltage */
ret = tps65910_read_reg(reg_offset, &buf);
if (ret)
return ret;
buf &= ~TPS65910_OP_REG_SEL_MASK;
buf |= vddx_op_vol_sel;
ret = tps65910_write_reg(reg_offset, &buf);
if (ret)
return ret;
ret = tps65910_read_reg(reg_offset, &buf);
if (ret)
return ret;
if ((buf & TPS65910_OP_REG_SEL_MASK) != vddx_op_vol_sel)
return 1;
return 0;
}