| menu "Power Domain Support" |
| |
| config POWER_DOMAIN |
| bool "Enable power domain support using Driver Model" |
| depends on DM && OF_CONTROL |
| help |
| Enable support for the power domain driver class. Many SoCs allow |
| power to be applied to or removed from portions of the SoC (power |
| domains). This may be used to save power. This API provides the |
| means to control such power management hardware. |
| |
| config APPLE_PMGR_POWER_DOMAIN |
| bool "Enable the Apple PMGR power domain driver" |
| depends on POWER_DOMAIN |
| default y if ARCH_APPLE |
| help |
| Enable support for manipulating power domains on Apple SoCs. |
| This driver is needed to power on parts of the SoC that have |
| not been powered on by previous boot stages. |
| |
| config BCM6328_POWER_DOMAIN |
| bool "Enable the BCM6328 power domain driver" |
| depends on POWER_DOMAIN && ARCH_BMIPS |
| help |
| Enable support for manipulating BCM6345 power domains via MMIO |
| mapped registers. |
| |
| config IMX8_POWER_DOMAIN |
| bool "Enable i.MX8 power domain driver" |
| depends on ARCH_IMX8 |
| help |
| Enable support for manipulating NXP i.MX8 on-SoC power domains via IPC |
| requests to the SCU. |
| |
| config IMX8M_POWER_DOMAIN |
| bool "Enable i.MX8M power domain driver" |
| depends on POWER_DOMAIN && ARCH_IMX8M |
| select CLK |
| help |
| Enable support for manipulating NXP i.MX8M on-SoC power domains via |
| requests to the ATF. |
| |
| config IMX8MP_HSIOMIX_BLKCTRL |
| bool "Enable i.MX8MP HSIOMIX domain driver" |
| depends on POWER_DOMAIN && IMX8MP |
| select CLK |
| help |
| Enable support for manipulating NXP i.MX8MP on-SoC HSIOMIX block controller. |
| |
| config MTK_POWER_DOMAIN |
| bool "Enable the MediaTek power domain driver" |
| depends on POWER_DOMAIN && ARCH_MEDIATEK |
| help |
| Enable support for manipulating MediaTek power domains via MMIO |
| mapped registers. |
| |
| config MESON_GX_VPU_POWER_DOMAIN |
| bool "Enable Amlogic Meson GX VPU power domain driver" |
| depends on POWER_DOMAIN && ARCH_MESON |
| help |
| Enable support for manipulating Amlogic Meson GX Video Processing |
| Unit power domain. |
| |
| config MESON_EE_POWER_DOMAIN |
| bool "Enable Amlogic Everything-Else power domain driver" |
| depends on POWER_DOMAIN && ARCH_MESON |
| help |
| Enable support for manipulating Amlogic Meson Everything-Else power |
| domains. |
| |
| config MESON_SECURE_POWER_DOMAIN |
| bool "Enable Amlogic Secure power domain driver" |
| depends on POWER_DOMAIN && ARCH_MESON && MESON_A1 |
| help |
| Enable support for manipulating Amlogic Meson Secure power domains. |
| Support for Amlogic A1 series. |
| |
| config SANDBOX_POWER_DOMAIN |
| bool "Enable the sandbox power domain test driver" |
| depends on POWER_DOMAIN && SANDBOX |
| help |
| Enable support for a test power domain driver implementation, which |
| simply accepts requests to power on/off various HW modules without |
| actually doing anything beyond a little error checking. |
| |
| config SCMI_POWER_DOMAIN |
| bool "Enable SCMI power domain driver" |
| depends on POWER_DOMAIN && SCMI_FIRMWARE |
| help |
| Enable power domain implementation based on SCMI power domain |
| management protocol. |
| |
| config TEGRA186_POWER_DOMAIN |
| bool "Enable Tegra186 BPMP-based power domain driver" |
| depends on TEGRA186_BPMP |
| help |
| Enable support for manipulating Tegra's on-SoC power domains via IPC |
| requests to the BPMP (Boot and Power Management Processor). |
| |
| config TI_SCI_POWER_DOMAIN |
| bool "Enable the TI SCI-based power domain driver" |
| depends on POWER_DOMAIN && TI_SCI_PROTOCOL |
| help |
| Generic power domain implementation for TI devices implementing the |
| TI SCI protocol. |
| |
| config TI_POWER_DOMAIN |
| bool "Enable the TI K3 Power domain driver" |
| depends on POWER_DOMAIN && ARCH_K3 |
| help |
| Generic power domain implementation for TI K3 devices. |
| |
| config ZYNQMP_POWER_DOMAIN |
| bool "Enable the Xilinx ZynqMP Power domain driver" |
| depends on POWER_DOMAIN && ZYNQMP_FIRMWARE |
| help |
| Generic power domain implementation for Xilinx ZynqMP devices. |
| The driver should be enabled when system starts in very minimal |
| configuration and it is extended at run time. Then enabling |
| the driver will ensure that PMUFW enable access to requested IP. |
| |
| endmenu |
