blob: 3bd1f5cd6d912e2f5155fa2d5bb662af08404a48 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Phytium PCIE host driver
*
* Heavily based on drivers/pci/pcie_xilinx.c
*
* Copyright (C) 2019
*/
#include <common.h>
#include <dm.h>
#include <pci.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/printk.h>
/**
* struct phytium_pcie - phytium PCIe controller state
* @cfg_base: The base address of memory mapped configuration space
*/
struct phytium_pcie {
void *cfg_base;
};
/*
* phytium_pci_skip_dev()
* @parent: Identifies the PCIe device to access
*
* Checks whether the parent of the PCIe device is bridge
*
* Return: true if it is bridge, else false.
*/
static int phytium_pci_skip_dev(pci_dev_t parent)
{
unsigned char pos, id;
unsigned long addr = 0x40000000;
unsigned short capreg;
unsigned char port_type;
addr += PCIE_ECAM_OFFSET(PCI_BUS(parent), PCI_DEV(parent), PCI_FUNC(parent), 0);
pos = 0x34;
while (1) {
pos = readb(addr + pos);
if (pos < 0x40)
break;
pos &= ~3;
id = readb(addr + pos);
if (id == 0xff)
break;
if (id == 0x10) {
capreg = readw(addr + pos + 2);
port_type = (capreg >> 4) & 0xf;
if (port_type == 0x6 || port_type == 0x4)
return 1;
else
return 0;
}
pos += 1;
}
return 0;
}
/**
* pci_phytium_conf_address() - Calculate the address of a config access
* @bus: Pointer to the PCI bus
* @bdf: Identifies the PCIe device to access
* @offset: The offset into the device's configuration space
* @paddress: Pointer to the pointer to write the calculates address to
*
* Calculates the address that should be accessed to perform a PCIe
* configuration space access for a given device identified by the PCIe
* controller device @pcie and the bus, device & function numbers in @bdf. If
* access to the device is not valid then the function will return an error
* code. Otherwise the address to access will be written to the pointer pointed
* to by @paddress.
*/
static int pci_phytium_conf_address(const struct udevice *bus, pci_dev_t bdf,
uint offset, void **paddress)
{
struct phytium_pcie *pcie = dev_get_priv(bus);
void *addr;
pci_dev_t bdf_parent;
unsigned int bus_no = PCI_BUS(bdf);
unsigned int dev_no = PCI_DEV(bdf);
bdf_parent = PCI_BDF((bus_no - 1), 0, 0);
addr = pcie->cfg_base;
addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), 0);
if (bus_no > 0 && dev_no > 0) {
if ((readb(addr + PCI_HEADER_TYPE) & 0x7f) !=
PCI_HEADER_TYPE_BRIDGE)
return -ENODEV;
if (phytium_pci_skip_dev(bdf_parent))
return -ENODEV;
}
addr += offset;
*paddress = addr;
return 0;
}
/**
* pci_phytium_read_config() - Read from configuration space
* @bus: Pointer to the PCI bus
* @bdf: Identifies the PCIe device to access
* @offset: The offset into the device's configuration space
* @valuep: A pointer at which to store the read value
* @size: Indicates the size of access to perform
*
* Read a value of size @size from offset @offset within the configuration
* space of the device identified by the bus, device & function numbers in @bdf
* on the PCI bus @bus.
*/
static int pci_phytium_read_config(const struct udevice *bus, pci_dev_t bdf,
uint offset, ulong *valuep,
enum pci_size_t size)
{
return pci_generic_mmap_read_config(bus, pci_phytium_conf_address,
bdf, offset, valuep, size);
}
/**
* pci_phytium_write_config() - Write to configuration space
* @bus: Pointer to the PCI bus
* @bdf: Identifies the PCIe device to access
* @offset: The offset into the device's configuration space
* @value: The value to write
* @size: Indicates the size of access to perform
*
* Write the value @value of size @size from offset @offset within the
* configuration space of the device identified by the bus, device & function
* numbers in @bdf on the PCI bus @bus.
*/
static int pci_phytium_write_config(struct udevice *bus, pci_dev_t bdf,
uint offset, ulong value,
enum pci_size_t size)
{
return pci_generic_mmap_write_config(bus, pci_phytium_conf_address,
bdf, offset, value, size);
}
/**
* pci_phytium_of_to_plat() - Translate from DT to device state
* @dev: A pointer to the device being operated on
*
* Translate relevant data from the device tree pertaining to device @dev into
* state that the driver will later make use of. This state is stored in the
* device's private data structure.
*
* Return: 0 on success, else -EINVAL
*/
static int pci_phytium_of_to_plat(struct udevice *dev)
{
struct phytium_pcie *pcie = dev_get_priv(dev);
struct fdt_resource reg_res;
DECLARE_GLOBAL_DATA_PTR;
int err;
err = fdt_get_resource(gd->fdt_blob, dev_of_offset(dev), "reg",
0, &reg_res);
if (err < 0) {
pr_err("\"reg\" resource not found\n");
return err;
}
pcie->cfg_base = map_physmem(reg_res.start,
fdt_resource_size(&reg_res),
MAP_NOCACHE);
return 0;
}
static const struct dm_pci_ops pci_phytium_ops = {
.read_config = pci_phytium_read_config,
.write_config = pci_phytium_write_config,
};
static const struct udevice_id pci_phytium_ids[] = {
{ .compatible = "phytium,pcie-host-1.0" },
{ }
};
U_BOOT_DRIVER(pci_phytium) = {
.name = "pci_phytium",
.id = UCLASS_PCI,
.of_match = pci_phytium_ids,
.ops = &pci_phytium_ops,
.of_to_plat = pci_phytium_of_to_plat,
.priv_auto = sizeof(struct phytium_pcie),
};