| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* Texas Instruments ICSSG Ethernet driver |
| * |
| * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ |
| * |
| */ |
| |
| #ifndef __NET_TI_ICSSG_SWITCH_MAP_H |
| #define __NET_TI_ICSSG_SWITCH_MAP_H |
| |
| /*Time after which FDB entries are checked for aged out values. Value in nanoseconds*/ |
| #define FDB_AGEING_TIMEOUT_OFFSET 0x0014 |
| |
| /*default VLAN tag for Host Port*/ |
| #define HOST_PORT_DF_VLAN_OFFSET 0x001C |
| |
| /*Same as HOST_PORT_DF_VLAN_OFFSET*/ |
| #define EMAC_ICSSG_SWITCH_PORT0_DEFAULT_VLAN_OFFSET HOST_PORT_DF_VLAN_OFFSET |
| |
| /*default VLAN tag for P1 Port*/ |
| #define P1_PORT_DF_VLAN_OFFSET 0x0020 |
| |
| /*Same as P1_PORT_DF_VLAN_OFFSET*/ |
| #define EMAC_ICSSG_SWITCH_PORT1_DEFAULT_VLAN_OFFSET P1_PORT_DF_VLAN_OFFSET |
| |
| /*default VLAN tag for P2 Port*/ |
| #define P2_PORT_DF_VLAN_OFFSET 0x0024 |
| |
| /*Same as P2_PORT_DF_VLAN_OFFSET*/ |
| #define EMAC_ICSSG_SWITCH_PORT2_DEFAULT_VLAN_OFFSET P2_PORT_DF_VLAN_OFFSET |
| |
| /*VLAN-FID Table offset. 4096 VIDs. 2B per VID = 8KB = 0x2000*/ |
| #define VLAN_STATIC_REG_TABLE_OFFSET 0x0100 |
| |
| /*VLAN-FID Table offset for EMAC*/ |
| #define EMAC_ICSSG_SWITCH_DEFAULT_VLAN_TABLE_OFFSET VLAN_STATIC_REG_TABLE_OFFSET |
| |
| /*packet descriptor Q reserved memory*/ |
| #define PORT_DESC0_HI 0x2104 |
| |
| /*packet descriptor Q reserved memory*/ |
| #define PORT_DESC0_LO 0x2F6C |
| |
| /*packet descriptor Q reserved memory*/ |
| #define PORT_DESC1_HI 0x3DD4 |
| |
| /*packet descriptor Q reserved memory*/ |
| #define PORT_DESC1_LO 0x4C3C |
| |
| /*packet descriptor Q reserved memory*/ |
| #define HOST_DESC0_HI 0x5AA4 |
| |
| /*packet descriptor Q reserved memory*/ |
| #define HOST_DESC0_LO 0x5F0C |
| |
| /*packet descriptor Q reserved memory*/ |
| #define HOST_DESC1_HI 0x6374 |
| |
| /*packet descriptor Q reserved memory*/ |
| #define HOST_DESC1_LO 0x67DC |
| |
| /*special packet descriptor Q reserved memory*/ |
| #define HOST_SPPD0 0x7AAC |
| |
| /*special packet descriptor Q reserved memory*/ |
| #define HOST_SPPD1 0x7EAC |
| |
| /*_Small_Description_*/ |
| #define TIMESYNC_FW_WC_CYCLECOUNT_OFFSET 0x83EC |
| |
| /*IEP count hi roll over count*/ |
| #define TIMESYNC_FW_WC_HI_ROLLOVER_COUNT_OFFSET 0x83F4 |
| |
| /*_Small_Description_*/ |
| #define TIMESYNC_FW_WC_COUNT_HI_SW_OFFSET_OFFSET 0x83F8 |
| |
| /*Set clock descriptor*/ |
| #define TIMESYNC_FW_WC_SETCLOCK_DESC_OFFSET 0x83FC |
| |
| /*_Small_Description_*/ |
| #define TIMESYNC_FW_WC_SYNCOUT_REDUCTION_FACTOR_OFFSET 0x843C |
| |
| /*_Small_Description_*/ |
| #define TIMESYNC_FW_WC_SYNCOUT_REDUCTION_COUNT_OFFSET 0x8440 |
| |
| /*_Small_Description_*/ |
| #define TIMESYNC_FW_WC_SYNCOUT_START_TIME_CYCLECOUNT_OFFSET 0x8444 |
| |
| /*Control variable to generate SYNC1*/ |
| #define TIMESYNC_FW_WC_ISOM_PIN_SIGNAL_EN_OFFSET 0x844C |
| |
| /*SystemTime Sync0 periodicity*/ |
| #define TIMESYNC_FW_ST_SYNCOUT_PERIOD_OFFSET 0x8450 |
| |
| /*pktTxDelay for P1 = link speed dependent p1 mac delay + p1 phy delay*/ |
| #define TIMESYNC_FW_WC_PKTTXDELAY_P1_OFFSET 0x8454 |
| |
| /*pktTxDelay for P2 = link speed dependent p2 mac delay + p2 phy delay*/ |
| #define TIMESYNC_FW_WC_PKTTXDELAY_P2_OFFSET 0x8458 |
| |
| /*Set clock operation done signal for next task*/ |
| #define TIMESYNC_FW_SIG_PNFW_OFFSET 0x845C |
| |
| /*Set clock operation done signal for next task*/ |
| #define TIMESYNC_FW_SIG_TIMESYNCFW_OFFSET 0x8460 |
| |
| /*New list is copied at this time*/ |
| #define TAS_CONFIG_CHANGE_TIME 0x000C |
| |
| /*config change error counter*/ |
| #define TAS_CONFIG_CHANGE_ERROR_COUNTER 0x0014 |
| |
| /*TAS List update pending flag*/ |
| #define TAS_CONFIG_PENDING 0x0018 |
| |
| /*TAS list update trigger flag*/ |
| #define TAS_CONFIG_CHANGE 0x0019 |
| |
| /*List length for new TAS schedule*/ |
| #define TAS_ADMIN_LIST_LENGTH 0x001A |
| |
| /*Currently active TAS list index*/ |
| #define TAS_ACTIVE_LIST_INDEX 0x001B |
| |
| /*Cycle time for the new TAS schedule*/ |
| #define TAS_ADMIN_CYCLE_TIME 0x001C |
| |
| /*Cycle counts remaining till the TAS list update*/ |
| #define TAS_CONFIG_CHANGE_CYCLE_COUNT 0x0020 |
| |
| /*Base Flow ID for sending packets to Host for Slice0*/ |
| #define PSI_L_REGULAR_FLOW_ID_BASE_OFFSET 0x0024 |
| |
| /*Same as PSI_L_REGULAR_FLOW_ID_BASE_OFFSET*/ |
| #define EMAC_ICSSG_SWITCH_PSI_L_REGULAR_FLOW_ID_BASE_OFFSET PSI_L_REGULAR_FLOW_ID_BASE_OFFSET |
| |
| /*Base Flow ID for sending mgmt and Tx TS to Host for Slice0*/ |
| #define PSI_L_MGMT_FLOW_ID_OFFSET 0x0026 |
| |
| /*Same as PSI_L_MGMT_FLOW_ID_OFFSET*/ |
| #define EMAC_ICSSG_SWITCH_PSI_L_MGMT_FLOW_ID_BASE_OFFSET PSI_L_MGMT_FLOW_ID_OFFSET |
| |
| /*Queue number for Special packets written here*/ |
| #define SPL_PKT_DEFAULT_PRIORITY 0x0028 |
| |
| /*Express Preemptible Queue Mask*/ |
| #define EXPRESS_PRE_EMPTIVE_Q_MASK 0x0029 |
| |
| /*Port1/Port2 Default Queue number for untagged packets, only 1B is used*/ |
| #define QUEUE_NUM_UNTAGGED 0x002A |
| |
| /*Stores the table used for priority regeneration. 1B per PCP/Queue*/ |
| #define PORT_Q_PRIORITY_REGEN_OFFSET 0x002C |
| |
| /* For marking Packet as priority/express (this feature is disabled) or |
| * cut-through/S&F. |
| */ |
| #define EXPRESS_PRE_EMPTIVE_Q_MAP 0x0034 |
| |
| /*Stores the table used for priority mapping. 1B per PCP/Queue*/ |
| #define PORT_Q_PRIORITY_MAPPING_OFFSET 0x003C |
| |
| /*TAS gate mask for windows list0*/ |
| #define TAS_GATE_MASK_LIST0 0x0100 |
| |
| /*TAS gate mask for windows list1*/ |
| #define TAS_GATE_MASK_LIST1 0x0350 |
| |
| /*Memory to Enable/Disable Preemption on TX side*/ |
| #define PRE_EMPTION_ENABLE_TX 0x05A0 |
| |
| /*Active State of Preemption on TX side*/ |
| #define PRE_EMPTION_ACTIVE_TX 0x05A1 |
| |
| /*Memory to Enable/Disable Verify State Machine Preemption*/ |
| #define PRE_EMPTION_ENABLE_VERIFY 0x05A2 |
| |
| /*Verify Status of State Machine*/ |
| #define PRE_EMPTION_VERIFY_STATUS 0x05A3 |
| |
| /*Non Final Fragment Size supported by Link Partner*/ |
| #define PRE_EMPTION_ADD_FRAG_SIZE_REMOTE 0x05A4 |
| |
| /*Non Final Fragment Size supported by Firmware*/ |
| #define PRE_EMPTION_ADD_FRAG_SIZE_LOCAL 0x05A6 |
| |
| /*Time in ms the State machine waits for respond packet*/ |
| #define PRE_EMPTION_VERIFY_TIME 0x05A8 |
| |
| /*Memory used for R30 related management commands*/ |
| #define MGR_R30_CMD_OFFSET 0x05AC |
| |
| /*HW Buffer Pool0 base address*/ |
| #define BUFFER_POOL_0_ADDR_OFFSET 0x05BC |
| |
| /*16B for Host Egress MSMC Q (Pre-emptible) context*/ |
| #define HOST_RX_Q_PRE_CONTEXT_OFFSET 0x0684 |
| |
| /*Buffer for 8 FDB entries to be added by 'Add Multiple FDB entries IOCTL*/ |
| #define FDB_CMD_BUFFER 0x0894 |
| |
| /*16B for Host Egress MSMC Q (Express) context*/ |
| #define HOST_RX_Q_EXP_CONTEXT_OFFSET 0x0940 |
| |
| /*Start of 32 bits PA_STAT counters*/ |
| #define PA_STAT_32b_START_OFFSET 0x0080 |
| |
| #endif |
| /* __NET_TI_ICSSG_SWITCH_MAP_H */ |
