blob: c07c780193f483aeaf96d9a80d2c95ed8b26c6e4 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Xilinx PCS/PMA Core phy driver
*
* Copyright (C) 2015 - 2016 Xilinx, Inc.
*/
#include <config.h>
#include <common.h>
#include <log.h>
#include <phy.h>
#include <dm.h>
#define MII_PHY_STATUS_SPD_MASK 0x0C00
#define MII_PHY_STATUS_FULLDUPLEX 0x1000
#define MII_PHY_STATUS_1000 0x0800
#define MII_PHY_STATUS_100 0x0400
#define XPCSPMA_PHY_CTRL_ISOLATE_DISABLE 0xFBFF
/* Mask used for ID comparisons */
#define XILINX_PHY_ID_MASK 0xfffffff0
/* Known PHY IDs */
#define XILINX_PHY_ID 0x01740c00
/* struct phy_device dev_flags definitions */
#define XAE_PHY_TYPE_MII 0
#define XAE_PHY_TYPE_GMII 1
#define XAE_PHY_TYPE_RGMII_1_3 2
#define XAE_PHY_TYPE_RGMII_2_0 3
#define XAE_PHY_TYPE_SGMII 4
#define XAE_PHY_TYPE_1000BASE_X 5
static int xilinxphy_startup(struct phy_device *phydev)
{
int err;
int status = 0;
debug("%s\n", __func__);
/* Update the link, but return if there
* was an error
*/
err = genphy_update_link(phydev);
if (err)
return err;
if (AUTONEG_ENABLE == phydev->autoneg) {
status = phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA);
status = status & MII_PHY_STATUS_SPD_MASK;
if (status & MII_PHY_STATUS_FULLDUPLEX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
switch (status) {
case MII_PHY_STATUS_1000:
phydev->speed = SPEED_1000;
break;
case MII_PHY_STATUS_100:
phydev->speed = SPEED_100;
break;
default:
phydev->speed = SPEED_10;
break;
}
} else {
int bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
if (bmcr < 0)
return bmcr;
if (bmcr & BMCR_FULLDPLX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
if (bmcr & BMCR_SPEED1000)
phydev->speed = SPEED_1000;
else if (bmcr & BMCR_SPEED100)
phydev->speed = SPEED_100;
else
phydev->speed = SPEED_10;
}
/*
* For 1000BASE-X Phy Mode the speed/duplex will always be
* 1000Mbps/fullduplex
*/
if (phydev->flags == XAE_PHY_TYPE_1000BASE_X) {
phydev->duplex = DUPLEX_FULL;
phydev->speed = SPEED_1000;
}
return 0;
}
static int xilinxphy_of_init(struct phy_device *phydev)
{
ofnode node;
debug("%s\n", __func__);
node = phy_get_ofnode(phydev);
if (!ofnode_valid(node))
return -EINVAL;
return 0;
}
static int xilinxphy_config(struct phy_device *phydev)
{
int temp;
debug("%s\n", __func__);
xilinxphy_of_init(phydev);
temp = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
temp &= XPCSPMA_PHY_CTRL_ISOLATE_DISABLE;
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, temp);
return 0;
}
U_BOOT_PHY_DRIVER(xilinxphy) = {
.uid = XILINX_PHY_ID,
.mask = XILINX_PHY_ID_MASK,
.name = "Xilinx PCS/PMA PHY",
.features = PHY_GBIT_FEATURES,
.config = &xilinxphy_config,
.startup = &xilinxphy_startup,
.shutdown = &genphy_shutdown,
};