blob: c5cf0d7dfbd14fc660721bae2f4351a3925af35f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Vitesse PHY drivers
*
* Copyright 2010-2014 Freescale Semiconductor, Inc.
* Original Author: Andy Fleming
* Add vsc8662 phy support - Priyanka Jain
*/
#include <common.h>
#include <miiphy.h>
/* Cicada Auxiliary Control/Status Register */
#define MIIM_CIS82xx_AUX_CONSTAT 0x1c
#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004
#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020
#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018
#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010
#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008
/* Cicada Extended Control Register 1 */
#define MIIM_CIS82xx_EXT_CON1 0x17
#define MIIM_CIS8201_EXTCON1_INIT 0x0000
/* Cicada 8204 Extended PHY Control Register 1 */
#define MIIM_CIS8204_EPHY_CON 0x17
#define MIIM_CIS8204_EPHYCON_INIT 0x0006
#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
/* Cicada 8204 Serial LED Control Register */
#define MIIM_CIS8204_SLED_CON 0x1b
#define MIIM_CIS8204_SLEDCON_INIT 0x1115
/* Vitesse VSC8601 Extended PHY Control Register 1 */
#define MII_VSC8601_EPHY_CTL 0x17
#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8)
#define PHY_EXT_PAGE_ACCESS 0x1f
#define PHY_EXT_PAGE_ACCESS_GENERAL 0x10
#define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3
/* Vitesse VSC8574 control register */
#define MIIM_VSC8574_MAC_SERDES_CON 0x10
#define MIIM_VSC8574_MAC_SERDES_ANEG 0x80
#define MIIM_VSC8574_GENERAL18 0x12
#define MIIM_VSC8574_GENERAL19 0x13
/* Vitesse VSC8574 gerenal purpose register 18 */
#define MIIM_VSC8574_18G_SGMII 0x80f0
#define MIIM_VSC8574_18G_QSGMII 0x80e0
#define MIIM_VSC8574_18G_CMDSTAT 0x8000
/* Vitesse VSC8514 control register */
#define MIIM_VSC8514_MAC_SERDES_CON 0x10
#define MIIM_VSC8514_GENERAL18 0x12
#define MIIM_VSC8514_GENERAL19 0x13
#define MIIM_VSC8514_GENERAL23 0x17
/* Vitesse VSC8514 gerenal purpose register 18 */
#define MIIM_VSC8514_18G_QSGMII 0x80e0
#define MIIM_VSC8514_18G_CMDSTAT 0x8000
/* Vitesse VSC8664 Control/Status Register */
#define MIIM_VSC8664_SERDES_AND_SIGDET 0x13
#define MIIM_VSC8664_ADDITIONAL_DEV 0x16
#define MIIM_VSC8664_EPHY_CON 0x17
#define MIIM_VSC8664_LED_CON 0x1E
#define PHY_EXT_PAGE_ACCESS_EXTENDED 0x0001
/* CIS8201 */
static int vitesse_config(struct phy_device *phydev)
{
/* Override PHY config settings */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
MIIM_CIS82xx_AUXCONSTAT_INIT);
/* Set up the interface mode */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
MIIM_CIS8201_EXTCON1_INIT);
genphy_config_aneg(phydev);
return 0;
}
static int vitesse_parse_status(struct phy_device *phydev)
{
int speed;
int mii_reg;
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
switch (speed) {
case MIIM_CIS82xx_AUXCONSTAT_GBIT:
phydev->speed = SPEED_1000;
break;
case MIIM_CIS82xx_AUXCONSTAT_100:
phydev->speed = SPEED_100;
break;
default:
phydev->speed = SPEED_10;
break;
}
return 0;
}
static int vitesse_startup(struct phy_device *phydev)
{
int ret;
ret = genphy_update_link(phydev);
if (ret)
return ret;
return vitesse_parse_status(phydev);
}
static int cis8204_config(struct phy_device *phydev)
{
/* Override PHY config settings */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
MIIM_CIS82xx_AUXCONSTAT_INIT);
genphy_config_aneg(phydev);
if (phy_interface_is_rgmii(phydev))
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
MIIM_CIS8204_EPHYCON_INIT |
MIIM_CIS8204_EPHYCON_RGMII);
else
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
MIIM_CIS8204_EPHYCON_INIT);
return 0;
}
/* Vitesse VSC8601 */
/* This adds a skew for both TX and RX clocks, so the skew should only be
* applied to "rgmii-id" interfaces. It may not work as expected
* on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
static int vsc8601_add_skew(struct phy_device *phydev)
{
int ret;
ret = phy_read(phydev, MDIO_DEVAD_NONE, MII_VSC8601_EPHY_CTL);
if (ret < 0)
return ret;
ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
return phy_write(phydev, MDIO_DEVAD_NONE, MII_VSC8601_EPHY_CTL, ret);
}
static int vsc8601_config(struct phy_device *phydev)
{
int ret = 0;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
ret = vsc8601_add_skew(phydev);
if (ret < 0)
return ret;
return genphy_config_aneg(phydev);
}
static int vsc8574_config(struct phy_device *phydev)
{
u32 val;
/* configure register 19G for MAC */
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
PHY_EXT_PAGE_ACCESS_GENERAL);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
/* set bit 15:14 to '01' for QSGMII mode */
val = (val & 0x3fff) | (1 << 14);
phy_write(phydev, MDIO_DEVAD_NONE,
MIIM_VSC8574_GENERAL19, val);
/* Enable 4 ports MAC QSGMII */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
MIIM_VSC8574_18G_QSGMII);
} else {
/* set bit 15:14 to '00' for SGMII mode */
val = val & 0x3fff;
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
/* Enable 4 ports MAC SGMII */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
MIIM_VSC8574_18G_SGMII);
}
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
/* When bit 15 is cleared the command has completed */
while (val & MIIM_VSC8574_18G_CMDSTAT)
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
/* Enable Serdes Auto-negotiation */
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
PHY_EXT_PAGE_ACCESS_EXTENDED3);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
genphy_config_aneg(phydev);
return 0;
}
static int vsc8514_config(struct phy_device *phydev)
{
u32 val;
int timeout = 1000000;
/* configure register to access 19G */
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
PHY_EXT_PAGE_ACCESS_GENERAL);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
/* set bit 15:14 to '01' for QSGMII mode */
val = (val & 0x3fff) | (1 << 14);
phy_write(phydev, MDIO_DEVAD_NONE,
MIIM_VSC8514_GENERAL19, val);
/* Enable 4 ports MAC QSGMII */
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
MIIM_VSC8514_18G_QSGMII);
} else {
/*TODO Add SGMII functionality once spec sheet
* for VSC8514 defines complete functionality
*/
}
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
/* When bit 15 is cleared the command has completed */
while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
if (0 == timeout) {
printf("PHY 8514 config failed\n");
return -1;
}
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
/* configure register to access 23 */
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
/* set bits 10:8 to '000' */
val = (val & 0xf8ff);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
/* Enable Serdes Auto-negotiation */
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
PHY_EXT_PAGE_ACCESS_EXTENDED3);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON);
val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON, val);
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
genphy_config_aneg(phydev);
return 0;
}
static int vsc8664_config(struct phy_device *phydev)
{
u32 val;
/* Enable MAC interface auto-negotiation */
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON);
val |= (1 << 13);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON, val);
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
PHY_EXT_PAGE_ACCESS_EXTENDED);
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET);
val |= (1 << 11);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET, val);
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
/* Enable LED blink */
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON);
val &= ~(1 << 2);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON, val);
genphy_config_aneg(phydev);
return 0;
}
U_BOOT_PHY_DRIVER(vsc8211) = {
.name = "Vitesse VSC8211",
.uid = 0xfc4b0,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vitesse_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8221) = {
.name = "Vitesse VSC8221",
.uid = 0xfc550,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config_aneg,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8244) = {
.name = "Vitesse VSC8244",
.uid = 0xfc6c0,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config_aneg,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8234) = {
.name = "Vitesse VSC8234",
.uid = 0xfc620,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config_aneg,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8574) = {
.name = "Vitesse VSC8574",
.uid = 0x704a0,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vsc8574_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8514) = {
.name = "Vitesse VSC8514",
.uid = 0x70670,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vsc8514_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8584) = {
.name = "Vitesse VSC8584",
.uid = 0x707c0,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vsc8574_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8601) = {
.name = "Vitesse VSC8601",
.uid = 0x70420,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vsc8601_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8641) = {
.name = "Vitesse VSC8641",
.uid = 0x70430,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config_aneg,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8662) = {
.name = "Vitesse VSC8662",
.uid = 0x70660,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &genphy_config_aneg,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(vsc8664) = {
.name = "Vitesse VSC8664",
.uid = 0x70660,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vsc8664_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
/* Vitesse bought Cicada, so we'll put these here */
U_BOOT_PHY_DRIVER(cis8201) = {
.name = "CIS8201",
.uid = 0xfc410,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &vitesse_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};
U_BOOT_PHY_DRIVER(cis8204) = {
.name = "Cicada Cis8204",
.uid = 0xfc440,
.mask = 0xffff0,
.features = PHY_GBIT_FEATURES,
.config = &cis8204_config,
.startup = &vitesse_startup,
.shutdown = &genphy_shutdown,
};