blob: 4fac146353da0cef5144b0febbf72a15b8599c7c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2007 Freescale Semiconductor, Inc.
* Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
*
* Authors: Nick.Spence@freescale.com
* Wilson.Lo@freescale.com
* scottwood@freescale.com
*
* This files is mostly identical to the original from
* board\freescale\mpc8315erdb\sdram.c
*/
#ifndef CONFIG_MPC83XX_SDRAM
#include <common.h>
#include <init.h>
#include <mpc83xx.h>
#include <spd_sdram.h>
#include <asm/bitops.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
/* Fixed sdram init -- doesn't use serial presence detect.
*
* This is useful for faster booting in configs where the RAM is unlikely
* to be changed, or for things like NAND booting where space is tight.
*/
static long fixed_sdram(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = CFG_SYS_SDRAM_SIZE;
u32 msize_log2 = __ilog2(msize);
out_be32(&im->sysconf.ddrlaw[0].bar,
CFG_SYS_SDRAM_BASE & 0xfffff000);
out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
out_be32(&im->sysconf.ddrcdr, CFG_SYS_DDRCDR_VALUE);
out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
out_be32(&im->ddr.cs_config[0], CFG_SYS_DDR_CS0_CONFIG);
/* Currently we use only one CS, so disable the other bank. */
out_be32(&im->ddr.cs_config[1], 0);
out_be32(&im->ddr.sdram_clk_cntl, CFG_SYS_DDR_SDRAM_CLK_CNTL);
out_be32(&im->ddr.timing_cfg_3, CFG_SYS_DDR_TIMING_3);
out_be32(&im->ddr.timing_cfg_1, CFG_SYS_DDR_TIMING_1);
out_be32(&im->ddr.timing_cfg_2, CFG_SYS_DDR_TIMING_2);
out_be32(&im->ddr.timing_cfg_0, CFG_SYS_DDR_TIMING_0);
out_be32(&im->ddr.sdram_cfg, CFG_SYS_DDR_SDRAM_CFG);
out_be32(&im->ddr.sdram_cfg2, CFG_SYS_DDR_SDRAM_CFG2);
out_be32(&im->ddr.sdram_mode, CFG_SYS_DDR_MODE);
out_be32(&im->ddr.sdram_mode2, CFG_SYS_DDR_MODE2);
out_be32(&im->ddr.sdram_interval, CFG_SYS_DDR_INTERVAL);
sync();
/* enable DDR controller */
setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
sync();
return get_ram_size(CFG_SYS_SDRAM_BASE, msize);
}
int dram_init(void)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize;
if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
return -ENXIO;
/* DDR SDRAM */
msize = fixed_sdram();
/* return total bus SDRAM size(bytes) -- DDR */
gd->ram_size = msize;
return 0;
}
#endif /* !CONFIG_MPC83XX_SDRAM */