blob: 7bca98dd3d751a74adb4f05adb43f1f743a06c01 [file] [log] [blame]
Overview
--------
The LX2160A Reference Design (RDB) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LX2160A
Layerscape Architecture processor and its personalities.
LX2160A SoC Overview
--------------------------------------
For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
LX2160ARDB board Overview
----------------------
DDR Memory
Two ports of 72-bits (8-bits ECC) DDR4.
Each port supports four chip-selects and two DIMM
connectors. Data rate upto 3.2 GT/s.
SERDES ports
Thress serdes controllers (24 lanes)
Serdes1: Supports two USXGMII connectors, each connected through
Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi
IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi
CS4223 phy.
Serdes2: Supports one PCIe x4 (Gen1/2/3/4) connector, four SATA 3.0
connectors
Serdes3: Supports one PCIe x8 (Gen1/2/3/4) connector
eSDHC
eSDHC1: Supports a SD connector for connecting SD cards
eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
Octal SPI (XSPI)
Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator
for off-board emulation
I2C All system devices on I2C1 multiplexed using PCA9547 multiplexer
Serial Ports
USB 3.0
Two high speed USB 3.0 ports. First USB 3.0 port configured as
Host with Type-A connector, second USB 3.0 port configured as OTG
with micro-AB connector
Serial Ports Two UART ports
Ethernet Two RGMII interfaces
Debug ARM JTAG support
Booting Options
---------------
a) Flexspi boot
b) SD boot
Memory map for Flexspi flash
----------------------------
Image Flash Offset
bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl) 0x00000000
fip.bin (bl31 + bl33(u-boot) +
header for Secure-boot(secure-boot only)) 0x00100000
Boot firmware Environment 0x00500000
DDR PHY Firmware (fip_ddr_all.bin) 0x00800000
DPAA2 MC Firmware 0x00A00000
DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
Kernel.itb 0x01000000
Memory map for sd card
----------------------------
Image SD card Offset
bl2_sd.pbl (RCW+PBI+bl2.pbl) 0x00008
fip.bin (bl31 + bl33(u-boot) +
header for Secure-boot(secure-boot only)) 0x00800
Boot firmware Environment 0x02800
DDR PHY Firmware (fip_ddr_all.bin) 0x04000
DPAA2 MC Firmware 0x05000
DPAA2 DPL 0x06800
DPAA2 DPC 0x07000
Kernel.itb 0x08000
LX2160AQDS board Overview
----------------------
Various Mezzanine cards and their connection for different SERDES protocols is
as below:
SERDES1 |CARDS
-----------------------------------------------------------------------
1 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
3 |Mezzanine:X-M11-USXGMII (29828)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
7 |Mezzanine:X-M11-USXGMII (29828)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
8 |Mezzanine:X-M12-XFI (29829)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M12-XFI (29829)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
13 |Mezzanine:X-M8-100G (29734)
|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M8-100G (29734)
|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT2(J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
15 |Mezzanine:X-M8-100G (29734)
|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
17 |Mezzanine:X-M13-25G (32133)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
19 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125)
|Mezzanine:X-M7-40G (29738)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
20 |Mezzanine:X-M7-40G (29738)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J108)
|Mezzanine:X-M7-40G (29738)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT2 (J111)
|Connect I/O cable to IO_SLOT2(J113)
------------------------------------------------------------------------
SERDES2 |CARDS
-----------------------------------------------------------------------
2 |Mezzanine:X-M6-PCIE-X8 (29737) *
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT3(J116)
------------------------------------------------------------------------
3 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT3(J116)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT4(J119)
------------------------------------------------------------------------
5 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT3(J116)
|Mezzanine:X-M5-SATA (29687)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT4(J119)
------------------------------------------------------------------------
11 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT7(J127)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT8(J131)
------------------------------------------------------------------------
SERDES3 |CARDS
-----------------------------------------------------------------------
2 |Mezzanine:X-M6-PCIE-X8 (29737) *
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT6 (J123)
|Connect I/O cable to IO_SLOT5(J122)
-------------------------------------------------------------------------
3 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT5 (J120)
|Connect I/O cable to IO_SLOT5(J122)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT6 (J123)
|Connect I/O cable to IO_SLOT6(J125)
-------------------------------------------------------------------------
LX2162A SoC Overview
--------------------------------------
For details, please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
LX2162AQDS board Overview
----------------------
DDR Memory
One ports of 72-bits (8-bits ECC) DDR4.
Each port supports four chip-selects and two DIMM
connectors. Data rate upto 2.9 GT/s.
SERDES ports
Two serdes controllers (12 lanes)
Serdes1: Supports two USXGMII connectors, each connected through
Aquantia AQR107 phy, two 25GbE SFP+ modules connected through an Inphi
IN112525 phy and one 40 GbE QSFP+ module connected through an Inphi
CS4223 phy.
Serdes2: Supports two PCIe x4 (Gen3) and one PCIe x8 (Gen3) connector,
four SATA 3.0 connectors
eSDHC
eSDHC1: Supports a SD connector for connecting SD cards
eSDHC2: Supports 128GB Micron MTFC128GAJAECE-IT eMMC
Octal SPI (XSPI)
Supports two 64 MB onbpard octal SPI flash memories, one SPI emulator
for off-board emulation
I2C All system devices on I2C1 multiplexed using PCA9547 multiplexer
Serial Ports
USB 3.0
One high speed USB 3.0 ports. First USB 3.0 port configured as Host
with Type-A connector, second USB 3.0 port configured as OTG with
micro-AB connector
Serial Ports Two UART ports
Ethernet Two RGMII interfaces
Debug ARM JTAG support
Booting Options
---------------
a) Flexspi boot
b) SD boot
c) eMMC boot
Memory map for Flexspi flash
----------------------------
Image Flash Offset
bl2_flexspi_nor.pbl (RCW+PBI+bl2.pbl) 0x00000000
fip.bin (bl31 + bl33(u-boot) +
header for Secure-boot(secure-boot only)) 0x00100000
Boot firmware Environment 0x00500000
DDR PHY Firmware (fip_ddr_all.bin) 0x00800000
DPAA2 MC Firmware 0x00A00000
DPAA2 DPL 0x00D00000
DPAA2 DPC 0x00E00000
Kernel.itb 0x01000000
Memory map for sd/eMMC card
----------------------------
Image SD/eMMC card Offset
bl2_sd.pbl (RCW+PBI+bl2.pbl) 0x00008
fip.bin (bl31 + bl33(u-boot) +
header for Secure-boot(secure-boot only)) 0x00800
Boot firmware Environment 0x02800
DDR PHY Firmware (fip_ddr_all.bin) 0x04000
DPAA2 MC Firmware 0x05000
DPAA2 DPL 0x06800
DPAA2 DPC 0x07000
Kernel.itb 0x08000
Various Mezzanine cards and their connection for different SERDES protocols is
as below:
SERDES1 |CARDS
-----------------------------------------------------------------------
1 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
3 |Mezzanine:X-M11-USXGMII (29828)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
15 |Mezzanine:X-M8-50G (29734)
|Connect Hydra Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
17 |Mezzanine:X-M13-25G (32133)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J110)
------------------------------------------------------------------------
18 |Mezzanine:X-M11-USXGMII (29828), X-M13-25G (32133)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT1 (J108)
|Connect M11 I/O cable to IO_SLOT1(J110), M13 I/O cable to IO_SLOT6(J125)
------------------------------------------------------------------------
20 |Mezzanine:X-M7-40G (29738)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT1 (J108)
|Connect I/O cable to IO_SLOT1(J108)
------------------------------------------------------------------------
SERDES2 |CARDS
-----------------------------------------------------------------------
2 |Mezzanine:X-M6-PCIE-X8 (29737) *
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect Straight Cable (HDR-198816-XX-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT3(J116)
------------------------------------------------------------------------
3 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT3(J116)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT4(J119)
------------------------------------------------------------------------
5 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT3(J116)
|Mezzanine:X-M5-SATA (29687)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT4(J119)
------------------------------------------------------------------------
11 |Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT3 (J114)
|Connect I/O cable to IO_SLOT7(J127)
|Mezzanine:X-M4-PCIE-SGMII (29733)
|Connect Hydra Cable (HDR-198564-01-ECUE) to SD_SLOT4 (J117)
|Connect I/O cable to IO_SLOT8(J131)
------------------------------------------------------------------------