| menu "mpc83xx CPU" |
| depends on MPC83xx |
| |
| config DEFAULT_IMMR |
| hex |
| default 0xFF400000 |
| |
| config E300 |
| def_bool y |
| |
| config SYS_CPU |
| default "mpc83xx" |
| |
| config SYS_83XX_DDR_USES_CS0 |
| bool |
| help |
| DDR should be configured using CS0 and CS1 instead of CS2 and CS3. |
| |
| choice |
| prompt "Target select" |
| optional |
| |
| config TARGET_CMPCPRO |
| bool "Support CMPCPRO board from CSSI" |
| select ARCH_MPC832X |
| |
| config TARGET_MPC837XERDB |
| bool "Support MPC837XERDB" |
| select ARCH_MPC837X |
| select BOARD_EARLY_INIT_F |
| select SYS_83XX_DDR_USES_CS0 |
| |
| config TARGET_KMETER1 |
| bool "Support kmeter1" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_KMCOGE5NE |
| bool "Support kmcoge5ne" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_KMTEGR1 |
| bool "Support kmtegr1" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_TUXX1 |
| bool "Support tuxx1" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_KMSUPX5 |
| bool "Support kmsupx5" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_TUGE1 |
| bool "Support tuge1" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_KMOPTI2 |
| bool "Support kmopti2" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_KMTEPR2 |
| bool "Support kmtepr2" |
| select VENDOR_KM |
| select KM_ENABLE_FULL_DM_DTS_SUPPORT |
| |
| config TARGET_GAZERBEAM |
| bool "Support gazerbeam" |
| select ARCH_MPC8308 |
| select SYS_FSL_ERRATUM_ESDHC111 |
| imply ENV_IS_IN_FLASH |
| help |
| The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH |
| Systementwicklung based on the NXP MPC8308 SoC for usage in KVM |
| appliances. |
| |
| Features include: |
| * Two gigabit ethernet ports |
| * Multiple USB ports (depending on variant) |
| * Several gigabit ethernet or optical fiber ports (depending on |
| variant) |
| * Several display port inputs and outputs, and supporting redrivers |
| (depending on variant) |
| * Several FPGAs with custom logic (depending on variant) |
| |
| endchoice |
| |
| config MPC83XX_QUICC_ENGINE |
| bool |
| |
| # TODO: Imply MPC83xx PCI driver |
| config MPC83XX_PCI_SUPPORT |
| bool |
| |
| # TODO: Imply TSEC driver |
| config MPC83XX_TSEC1_SUPPORT |
| bool |
| |
| config MPC83XX_TSEC2_SUPPORT |
| bool |
| |
| config MPC83XX_PCIE1_SUPPORT |
| bool |
| |
| config MPC83XX_PCIE2_SUPPORT |
| bool |
| |
| config MPC83XX_SDHC_SUPPORT |
| bool |
| |
| config MPC83XX_SATA |
| bool |
| |
| config MPC83XX_SECOND_I2C |
| bool |
| |
| config MPC83XX_LDP_PIN |
| bool |
| |
| config ARCH_MPC830X |
| bool |
| select MPC83XX_SDHC_SUPPORT |
| select SYS_CACHE_SHIFT_5 |
| |
| config ARCH_MPC8308 |
| bool |
| select ARCH_MPC830X |
| select MPC83XX_TSEC1_SUPPORT |
| select MPC83XX_TSEC2_SUPPORT |
| select MPC83XX_PCIE1_SUPPORT |
| select MPC83XX_SECOND_I2C |
| |
| config ARCH_MPC831X |
| bool |
| select MPC83XX_PCI_SUPPORT |
| select MPC83XX_TSEC1_SUPPORT |
| select MPC83XX_TSEC2_SUPPORT |
| select SYS_CACHE_SHIFT_5 |
| |
| config ARCH_MPC8313 |
| bool |
| select ARCH_MPC831X |
| select MPC83XX_SECOND_I2C |
| select FSL_ELBC |
| |
| config ARCH_MPC832X |
| bool |
| select MPC83XX_QUICC_ENGINE |
| select MPC83XX_PCI_SUPPORT |
| select SYS_CACHE_SHIFT_5 |
| |
| config ARCH_MPC834X |
| bool |
| select SYS_CACHE_SHIFT_5 |
| |
| config ARCH_MPC8360 |
| bool |
| select MPC83XX_QUICC_ENGINE |
| select MPC83XX_PCI_SUPPORT |
| select MPC83XX_LDP_PIN |
| select MPC83XX_SECOND_I2C |
| select SYS_CACHE_SHIFT_5 |
| |
| config ARCH_MPC837X |
| bool |
| select MPC83XX_PCI_SUPPORT |
| select MPC83XX_TSEC1_SUPPORT |
| select MPC83XX_TSEC2_SUPPORT |
| select MPC83XX_PCIE1_SUPPORT |
| select MPC83XX_PCIE2_SUPPORT |
| select MPC83XX_SDHC_SUPPORT |
| select MPC83XX_SATA |
| select MPC83XX_LDP_PIN |
| select MPC83XX_SECOND_I2C |
| select SYS_CACHE_SHIFT_5 |
| select FSL_ELBC |
| |
| source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/bats/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/hid/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig" |
| source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig" |
| |
| config 83XX_PCICLK |
| hex "PCI clock frequency" |
| default 0xDEADBEEF |
| help |
| If required, the PCI clock frequency to use when configuring |
| the host bridge. |
| |
| config FSL_ELBC |
| bool |
| |
| config FSL_SERDES |
| bool "SerDes initialization" |
| depends on !MPC83XX_SERDES |
| |
| config NEVER_ASSERT_ODT_TO_CPU |
| bool "Never assert ODT to internal IOs" |
| |
| source "board/freescale/mpc837xerdb/Kconfig" |
| source "board/gdsys/mpc8308/Kconfig" |
| source "board/cssi/cmpcpro/Kconfig" |
| |
| endmenu |
