| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * UniPhier SG (SoC Glue) block registers |
| * |
| * Copyright (C) 2011-2015 Copyright (C) 2011-2015 Panasonic Corporation |
| * Copyright (C) 2016-2017 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| */ |
| |
| #ifndef UNIPHIER_SG_REGS_H |
| #define UNIPHIER_SG_REGS_H |
| |
| #include <linux/bitops.h> |
| |
| #ifndef __ASSEMBLY__ |
| #include <linux/compiler.h> |
| #ifdef CONFIG_ARCH_UNIPHIER_V8_MULTI |
| extern void __iomem *sg_base; |
| #else |
| #define sg_base ((void __iomem *)SG_BASE) |
| #endif |
| #endif /* __ASSEMBLY__ */ |
| |
| /* Base Address */ |
| #define SG_BASE 0x5f800000 |
| |
| /* Revision */ |
| #define SG_REVISION 0x0000 |
| #define SG_REVISION_TYPE_MASK GENMASK(23, 16) |
| #define SG_REVISION_MODEL_MASK GENMASK(10, 8) |
| #define SG_REVISION_REV_MASK GENMASK(4, 0) |
| |
| /* Memory Configuration */ |
| #define SG_MEMCONF 0x0400 |
| |
| #define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0)) |
| #define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) |
| #define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) |
| #define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) |
| #define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) |
| #define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) |
| #define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8) |
| #define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) |
| #define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) |
| |
| #define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2)) |
| #define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) |
| #define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) |
| #define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) |
| #define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) |
| #define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) |
| #define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9) |
| #define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) |
| #define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) |
| |
| #define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16)) |
| #define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) |
| #define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) |
| #define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) |
| #define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) |
| #define SG_MEMCONF_CH2_SZ_1G ((0x1 << 26) | (0x01 << 16)) |
| #define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24) |
| #define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) |
| #define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) |
| /* PH1-LD6b, ProXstream2, PH1-LD20 only */ |
| #define SG_MEMCONF_CH2_DISABLE (0x1 << 21) |
| |
| #define SG_MEMCONF_SPARSEMEM (0x1 << 4) |
| |
| #define SG_USBPHYCTRL 0x0500 |
| #define SG_ETPHYPSHUT 0x0554 |
| #define SG_ETPHYCNT 0x0550 |
| |
| /* Pin Control */ |
| #define SG_PINCTRL_BASE 0x1000 |
| |
| /* PH1-Pro4, PH1-Pro5 */ |
| #define SG_LOADPINCTRL 0x1700 |
| |
| /* Input Enable */ |
| #define SG_IECTRL 0x1d00 |
| |
| /* Pin Monitor */ |
| #define SG_PINMON0 0x00100100 |
| #define SG_PINMON2 0x00100108 |
| |
| #define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19) |
| #define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19) |
| #define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19) |
| #define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19) |
| |
| #define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16) |
| |
| #define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16) |
| #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16) |
| |
| #endif /* UNIPHIER_SG_REGS_H */ |
