| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2012-2015 Panasonic Corporation |
| * Copyright (C) 2015-2020 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| */ |
| |
| #include <dm.h> |
| #include <fdt_support.h> |
| #include <linux/ctype.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <asm/global_data.h> |
| |
| #include "micro-support-card.h" |
| |
| #define SMC911X_OFFSET 0x00000 |
| #define LED_OFFSET 0x90000 |
| #define NS16550A_OFFSET 0xb0000 |
| #define MICRO_SUPPORT_CARD_RESET 0xd0034 |
| #define MICRO_SUPPORT_CARD_REVISION 0xd00e0 |
| |
| static bool support_card_found; |
| static void __iomem *support_card_base; |
| |
| static void support_card_detect(void) |
| { |
| DECLARE_GLOBAL_DATA_PTR; |
| const void *fdt = gd->fdt_blob; |
| int offset; |
| u64 addr, addr2; |
| |
| offset = fdt_node_offset_by_compatible(fdt, 0, "smsc,lan9118"); |
| if (offset < 0) |
| return; |
| |
| addr = fdt_get_base_address(fdt, offset); |
| if (addr == OF_BAD_ADDR) |
| return; |
| addr -= SMC911X_OFFSET; |
| |
| offset = fdt_node_offset_by_compatible(fdt, 0, "ns16550a"); |
| if (offset < 0) |
| return; |
| |
| addr2 = fdt_get_base_address(fdt, offset); |
| if (addr2 == OF_BAD_ADDR) |
| return; |
| addr2 -= NS16550A_OFFSET; |
| |
| /* sanity check */ |
| if (addr != addr2) |
| return; |
| |
| support_card_base = ioremap(addr, 0x100000); |
| |
| support_card_found = true; |
| } |
| |
| /* |
| * 0: reset deassert, 1: reset |
| * |
| * bit[0]: LAN, I2C, LED |
| * bit[1]: UART |
| */ |
| static void support_card_reset_deassert(void) |
| { |
| writel(0x00010000, support_card_base + MICRO_SUPPORT_CARD_RESET); |
| } |
| |
| static void support_card_reset(void) |
| { |
| writel(0x00020003, support_card_base + MICRO_SUPPORT_CARD_RESET); |
| } |
| |
| static int support_card_show_revision(void) |
| { |
| u32 revision; |
| |
| revision = readl(support_card_base + MICRO_SUPPORT_CARD_REVISION); |
| revision &= 0xff; |
| |
| /* revision 3.6.x card changed the revision format */ |
| printf("SC: Micro Support Card (CPLD version %s%d.%d)\n", |
| revision >> 4 == 6 ? "3." : "", |
| revision >> 4, revision & 0xf); |
| |
| return 0; |
| } |
| |
| void support_card_init(void) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| /* The system bus must be initialized for access to the support card. */ |
| ret = uclass_get_device_by_driver(UCLASS_SIMPLE_BUS, |
| DM_DRIVER_GET(uniphier_system_bus_driver), |
| &dev); |
| if (ret) |
| return; |
| |
| /* Check DT to see if this board has the support card. */ |
| support_card_detect(); |
| |
| if (!support_card_found) |
| return; |
| |
| support_card_reset(); |
| /* |
| * After power on, we need to keep the LAN controller in reset state |
| * for a while. (200 usec) |
| */ |
| udelay(200); |
| support_card_reset_deassert(); |
| |
| support_card_show_revision(); |
| } |
| |
| static const u8 ledval_num[] = { |
| 0x7e, /* 0 */ |
| 0x0c, /* 1 */ |
| 0xb6, /* 2 */ |
| 0x9e, /* 3 */ |
| 0xcc, /* 4 */ |
| 0xda, /* 5 */ |
| 0xfa, /* 6 */ |
| 0x4e, /* 7 */ |
| 0xfe, /* 8 */ |
| 0xde, /* 9 */ |
| }; |
| |
| static const u8 ledval_alpha[] = { |
| 0xee, /* A */ |
| 0xf8, /* B */ |
| 0x72, /* C */ |
| 0xbc, /* D */ |
| 0xf2, /* E */ |
| 0xe2, /* F */ |
| 0x7a, /* G */ |
| 0xe8, /* H */ |
| 0x08, /* I */ |
| 0x3c, /* J */ |
| 0xea, /* K */ |
| 0x70, /* L */ |
| 0x6e, /* M */ |
| 0xa8, /* N */ |
| 0xb8, /* O */ |
| 0xe6, /* P */ |
| 0xce, /* Q */ |
| 0xa0, /* R */ |
| 0xc8, /* S */ |
| 0x8c, /* T */ |
| 0x7c, /* U */ |
| 0x54, /* V */ |
| 0xfc, /* W */ |
| 0xec, /* X */ |
| 0xdc, /* Y */ |
| 0xa4, /* Z */ |
| }; |
| |
| static u8 char2ledval(char c) |
| { |
| if (isdigit(c)) |
| return ledval_num[c - '0']; |
| else if (isalpha(c)) |
| return ledval_alpha[toupper(c) - 'A']; |
| |
| return 0; |
| } |
| |
| void led_puts(const char *s) |
| { |
| int i; |
| u32 val = 0; |
| |
| if (!support_card_found) |
| return; |
| |
| if (!s) |
| return; |
| |
| for (i = 0; i < 4; i++) { |
| val <<= 8; |
| val |= char2ledval(*s); |
| if (*s != '\0') |
| s++; |
| } |
| |
| writel(~val, support_card_base + LED_OFFSET); |
| } |