| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Machine Specific Values for EXYNOS4012 based board |
| * |
| * Copyright (C) 2011 Samsung Electronics |
| */ |
| |
| #ifndef _ORIGEN_SETUP_H |
| #define _ORIGEN_SETUP_H |
| |
| #include <asm/arch/cpu.h> |
| |
| /* Bus Configuration Register Address */ |
| #define ASYNC_CONFIG 0x10010350 |
| |
| /* CLK_SRC_CPU */ |
| #define MUX_HPM_SEL_MOUTAPLL 0x0 |
| #define MUX_HPM_SEL_SCLKMPLL 0x1 |
| #define MUX_CORE_SEL_MOUTAPLL 0x0 |
| #define MUX_CORE_SEL_SCLKMPLL 0x1 |
| #define MUX_MPLL_SEL_FILPLL 0x0 |
| #define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 |
| #define MUX_APLL_SEL_FILPLL 0x0 |
| #define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 |
| #define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ |
| | (MUX_CORE_SEL_MOUTAPLL << 16) \ |
| | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ |
| | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) |
| |
| /* CLK_DIV_CPU0 */ |
| #define APLL_RATIO 0x0 |
| #define PCLK_DBG_RATIO 0x1 |
| #define ATB_RATIO 0x3 |
| #define PERIPH_RATIO 0x3 |
| #define COREM1_RATIO 0x7 |
| #define COREM0_RATIO 0x3 |
| #define CORE_RATIO 0x0 |
| #define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ |
| | (PCLK_DBG_RATIO << 20) \ |
| | (ATB_RATIO << 16) \ |
| | (PERIPH_RATIO << 12) \ |
| | (COREM1_RATIO << 8) \ |
| | (COREM0_RATIO << 4) \ |
| | (CORE_RATIO << 0)) |
| |
| /* CLK_DIV_CPU1 */ |
| #define HPM_RATIO 0x0 |
| #define COPY_RATIO 0x3 |
| #define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) |
| |
| /* CLK_SRC_DMC */ |
| #define MUX_PWI_SEL_XXTI 0x0 |
| #define MUX_PWI_SEL_XUSBXTI 0x1 |
| #define MUX_PWI_SEL_SCLK_HDMI24M 0x2 |
| #define MUX_PWI_SEL_SCLK_USBPHY0 0x3 |
| #define MUX_PWI_SEL_SCLK_USBPHY1 0x4 |
| #define MUX_PWI_SEL_SCLK_HDMIPHY 0x5 |
| #define MUX_PWI_SEL_SCLKMPLL 0x6 |
| #define MUX_PWI_SEL_SCLKEPLL 0x7 |
| #define MUX_PWI_SEL_SCLKVPLL 0x8 |
| #define MUX_DPHY_SEL_SCLKMPLL 0x0 |
| #define MUX_DPHY_SEL_SCLKAPLL 0x1 |
| #define MUX_DMC_BUS_SEL_SCLKMPLL 0x0 |
| #define MUX_DMC_BUS_SEL_SCLKAPLL 0x1 |
| #define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \ |
| | (MUX_DPHY_SEL_SCLKMPLL << 8) \ |
| | (MUX_DMC_BUS_SEL_SCLKMPLL << 4)) |
| |
| /* CLK_DIV_DMC0 */ |
| #define CORE_TIMERS_RATIO 0x1 |
| #define COPY2_RATIO 0x3 |
| #define DMCP_RATIO 0x1 |
| #define DMCD_RATIO 0x1 |
| #define DMC_RATIO 0x1 |
| #define DPHY_RATIO 0x1 |
| #define ACP_PCLK_RATIO 0x1 |
| #define ACP_RATIO 0x3 |
| #define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ |
| | (COPY2_RATIO << 24) \ |
| | (DMCP_RATIO << 20) \ |
| | (DMCD_RATIO << 16) \ |
| | (DMC_RATIO << 12) \ |
| | (DPHY_RATIO << 8) \ |
| | (ACP_PCLK_RATIO << 4) \ |
| | (ACP_RATIO << 0)) |
| |
| /* CLK_DIV_DMC1 */ |
| #define DPM_RATIO 0x1 |
| #define DVSEM_RATIO 0x1 |
| #define PWI_RATIO 0x1 |
| #define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ |
| | (DVSEM_RATIO << 16) \ |
| | (PWI_RATIO << 8)) |
| |
| /* CLK_SRC_TOP0 */ |
| #define MUX_ONENAND_SEL_ACLK_133 0x0 |
| #define MUX_ONENAND_SEL_ACLK_160 0x1 |
| #define MUX_ACLK_133_SEL_SCLKMPLL 0x0 |
| #define MUX_ACLK_133_SEL_SCLKAPLL 0x1 |
| #define MUX_ACLK_160_SEL_SCLKMPLL 0x0 |
| #define MUX_ACLK_160_SEL_SCLKAPLL 0x1 |
| #define MUX_ACLK_100_SEL_SCLKMPLL 0x0 |
| #define MUX_ACLK_100_SEL_SCLKAPLL 0x1 |
| #define MUX_ACLK_200_SEL_SCLKMPLL 0x0 |
| #define MUX_ACLK_200_SEL_SCLKAPLL 0x1 |
| #define MUX_VPLL_SEL_FINPLL 0x0 |
| #define MUX_VPLL_SEL_FOUTVPLL 0x1 |
| #define MUX_EPLL_SEL_FINPLL 0x0 |
| #define MUX_EPLL_SEL_FOUTEPLL 0x1 |
| #define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 |
| #define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 |
| #define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \ |
| | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ |
| | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ |
| | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ |
| | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ |
| | (MUX_VPLL_SEL_FINPLL << 8) \ |
| | (MUX_EPLL_SEL_FINPLL << 4)\ |
| | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) |
| |
| /* CLK_SRC_TOP1 */ |
| #define VPLLSRC_SEL_FINPLL 0x0 |
| #define VPLLSRC_SEL_SCLKHDMI24M 0x1 |
| #define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL) |
| |
| /* CLK_DIV_TOP */ |
| #define ONENAND_RATIO 0x0 |
| #define ACLK_133_RATIO 0x5 |
| #define ACLK_160_RATIO 0x4 |
| #define ACLK_100_RATIO 0x7 |
| #define ACLK_200_RATIO 0x3 |
| #define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ |
| | (ACLK_133_RATIO << 12)\ |
| | (ACLK_160_RATIO << 8) \ |
| | (ACLK_100_RATIO << 4) \ |
| | (ACLK_200_RATIO << 0)) |
| |
| /* CLK_SRC_LEFTBUS */ |
| #define MUX_GDL_SEL_SCLKMPLL 0x0 |
| #define MUX_GDL_SEL_SCLKAPLL 0x1 |
| #define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL) |
| |
| /* CLK_DIV_LEFTBUS */ |
| #define GPL_RATIO 0x1 |
| #define GDL_RATIO 0x3 |
| #define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) |
| |
| /* CLK_SRC_RIGHTBUS */ |
| #define MUX_GDR_SEL_SCLKMPLL 0x0 |
| #define MUX_GDR_SEL_SCLKAPLL 0x1 |
| #define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL) |
| |
| /* CLK_DIV_RIGHTBUS */ |
| #define GPR_RATIO 0x1 |
| #define GDR_RATIO 0x3 |
| #define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) |
| |
| /* CLK_SRS_FSYS: 6 = SCLKMPLL */ |
| #define SATA_SEL_SCLKMPLL 0 |
| #define SATA_SEL_SCLKAPLL 1 |
| |
| #define MMC_SEL_XXTI 0 |
| #define MMC_SEL_XUSBXTI 1 |
| #define MMC_SEL_SCLK_HDMI24M 2 |
| #define MMC_SEL_SCLK_USBPHY0 3 |
| #define MMC_SEL_SCLK_USBPHY1 4 |
| #define MMC_SEL_SCLK_HDMIPHY 5 |
| #define MMC_SEL_SCLKMPLL 6 |
| #define MMC_SEL_SCLKEPLL 7 |
| #define MMC_SEL_SCLKVPLL 8 |
| |
| #define MMCC0_SEL MMC_SEL_SCLKMPLL |
| #define MMCC1_SEL MMC_SEL_SCLKMPLL |
| #define MMCC2_SEL MMC_SEL_SCLKMPLL |
| #define MMCC3_SEL MMC_SEL_SCLKMPLL |
| #define MMCC4_SEL MMC_SEL_SCLKMPLL |
| #define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ |
| | (MMCC4_SEL << 16) \ |
| | (MMCC3_SEL << 12) \ |
| | (MMCC2_SEL << 8) \ |
| | (MMCC1_SEL << 4) \ |
| | (MMCC0_SEL << 0)) |
| |
| /* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ |
| /* CLK_DIV_FSYS1 */ |
| #define MMC0_RATIO 0xF |
| #define MMC0_PRE_RATIO 0x0 |
| #define MMC1_RATIO 0xF |
| #define MMC1_PRE_RATIO 0x0 |
| #define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ |
| | (MMC1_RATIO << 16) \ |
| | (MMC0_PRE_RATIO << 8) \ |
| | (MMC0_RATIO << 0)) |
| |
| /* CLK_DIV_FSYS2 */ |
| #define MMC2_RATIO 0xF |
| #define MMC2_PRE_RATIO 0x0 |
| #define MMC3_RATIO 0xF |
| #define MMC3_PRE_RATIO 0x0 |
| #define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ |
| | (MMC3_RATIO << 16) \ |
| | (MMC2_PRE_RATIO << 8) \ |
| | (MMC2_RATIO << 0)) |
| |
| /* CLK_DIV_FSYS3 */ |
| #define MMC4_RATIO 0xF |
| #define MMC4_PRE_RATIO 0x0 |
| #define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ |
| | (MMC4_RATIO << 0)) |
| |
| /* CLK_SRC_PERIL0 */ |
| #define UART_SEL_XXTI 0 |
| #define UART_SEL_XUSBXTI 1 |
| #define UART_SEL_SCLK_HDMI24M 2 |
| #define UART_SEL_SCLK_USBPHY0 3 |
| #define UART_SEL_SCLK_USBPHY1 4 |
| #define UART_SEL_SCLK_HDMIPHY 5 |
| #define UART_SEL_SCLKMPLL 6 |
| #define UART_SEL_SCLKEPLL 7 |
| #define UART_SEL_SCLKVPLL 8 |
| |
| #define UART0_SEL UART_SEL_SCLKMPLL |
| #define UART1_SEL UART_SEL_SCLKMPLL |
| #define UART2_SEL UART_SEL_SCLKMPLL |
| #define UART3_SEL UART_SEL_SCLKMPLL |
| #define UART4_SEL UART_SEL_SCLKMPLL |
| #define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \ |
| | (UART3_SEL << 12) \ |
| | (UART2_SEL << 8) \ |
| | (UART1_SEL << 4) \ |
| | (UART0_SEL << 0)) |
| |
| /* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ |
| /* CLK_DIV_PERIL0 */ |
| #define UART0_RATIO 7 |
| #define UART1_RATIO 7 |
| #define UART2_RATIO 7 |
| #define UART3_RATIO 7 |
| #define UART4_RATIO 7 |
| #define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ |
| | (UART3_RATIO << 12) \ |
| | (UART2_RATIO << 8) \ |
| | (UART1_RATIO << 4) \ |
| | (UART0_RATIO << 0)) |
| |
| /* Clock Source CAM/FIMC */ |
| /* CLK_SRC_CAM */ |
| #define CAM0_SEL_XUSBXTI 1 |
| #define CAM1_SEL_XUSBXTI 1 |
| #define CSIS0_SEL_XUSBXTI 1 |
| #define CSIS1_SEL_XUSBXTI 1 |
| |
| #define FIMC_SEL_SCLKMPLL 6 |
| #define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL |
| #define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL |
| #define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL |
| #define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL |
| |
| #define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \ |
| | (CSIS0_SEL_XUSBXTI << 24) \ |
| | (CAM1_SEL_XUSBXTI << 20) \ |
| | (CAM0_SEL_XUSBXTI << 16) \ |
| | (FIMC3_LCLK_SEL << 12) \ |
| | (FIMC2_LCLK_SEL << 8) \ |
| | (FIMC1_LCLK_SEL << 4) \ |
| | (FIMC0_LCLK_SEL << 0)) |
| |
| /* SCLK CAM */ |
| /* CLK_DIV_CAM */ |
| #define FIMC0_LCLK_RATIO 4 |
| #define FIMC1_LCLK_RATIO 4 |
| #define FIMC2_LCLK_RATIO 4 |
| #define FIMC3_LCLK_RATIO 4 |
| #define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \ |
| | (FIMC2_LCLK_RATIO << 8) \ |
| | (FIMC1_LCLK_RATIO << 4) \ |
| | (FIMC0_LCLK_RATIO << 0)) |
| |
| /* SCLK MFC */ |
| /* CLK_SRC_MFC */ |
| #define MFC_SEL_MPLL 0 |
| #define MOUTMFC_0 0 |
| #define MFC_SEL MOUTMFC_0 |
| #define MFC_0_SEL MFC_SEL_MPLL |
| #define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL)) |
| |
| |
| /* CLK_DIV_MFC */ |
| #define MFC_RATIO 3 |
| #define CLK_DIV_MFC_VAL (MFC_RATIO) |
| |
| /* SCLK G3D */ |
| /* CLK_SRC_G3D */ |
| #define G3D_SEL_MPLL 0 |
| #define MOUTG3D_0 0 |
| #define G3D_SEL MOUTG3D_0 |
| #define G3D_0_SEL G3D_SEL_MPLL |
| #define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL)) |
| |
| /* CLK_DIV_G3D */ |
| #define G3D_RATIO 1 |
| #define CLK_DIV_G3D_VAL (G3D_RATIO) |
| |
| /* SCLK LCD0 */ |
| /* CLK_SRC_LCD0 */ |
| #define FIMD_SEL_SCLKMPLL 6 |
| #define MDNIE0_SEL_XUSBXTI 1 |
| #define MDNIE_PWM0_SEL_XUSBXTI 1 |
| #define MIPI0_SEL_XUSBXTI 1 |
| #define CLK_SRC_LCD0_VAL ((MIPI0_SEL_XUSBXTI << 12) \ |
| | (MDNIE_PWM0_SEL_XUSBXTI << 8) \ |
| | (MDNIE0_SEL_XUSBXTI << 4) \ |
| | (FIMD_SEL_SCLKMPLL << 0)) |
| |
| /* CLK_DIV_LCD0 */ |
| #define FIMD0_RATIO 4 |
| #define CLK_DIV_LCD0_VAL (FIMD0_RATIO) |
| |
| /* Required period to generate a stable clock output */ |
| /* PLL_LOCK_TIME */ |
| #define PLL_LOCKTIME 0x1C20 |
| |
| /* PLL Values */ |
| #define DISABLE 0 |
| #define ENABLE 1 |
| #define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ |
| | (mdiv << 16) \ |
| | (pdiv << 8) \ |
| | (sdiv << 0)) |
| |
| /* APLL_CON0 */ |
| #define APLL_MDIV 0xFA |
| #define APLL_PDIV 0x6 |
| #define APLL_SDIV 0x1 |
| #define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) |
| |
| /* APLL_CON1 */ |
| #define APLL_AFC_ENB 0x1 |
| #define APLL_AFC 0xC |
| #define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) |
| |
| /* MPLL_CON0 */ |
| #define MPLL_MDIV 0xC8 |
| #define MPLL_PDIV 0x6 |
| #define MPLL_SDIV 0x1 |
| #define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) |
| |
| /* MPLL_CON1 */ |
| #define MPLL_AFC_ENB 0x0 |
| #define MPLL_AFC 0x1C |
| #define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) |
| |
| /* EPLL_CON0 */ |
| #define EPLL_MDIV 0x30 |
| #define EPLL_PDIV 0x3 |
| #define EPLL_SDIV 0x2 |
| #define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) |
| |
| /* EPLL_CON1 */ |
| #define EPLL_K 0x0 |
| #define EPLL_CON1_VAL (EPLL_K >> 0) |
| |
| /* VPLL_CON0 */ |
| #define VPLL_MDIV 0x35 |
| #define VPLL_PDIV 0x3 |
| #define VPLL_SDIV 0x2 |
| #define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) |
| |
| /* VPLL_CON1 */ |
| #define VPLL_SSCG_EN DISABLE |
| #define VPLL_SEL_PF_DN_SPREAD 0x0 |
| #define VPLL_MRR 0x11 |
| #define VPLL_MFR 0x0 |
| #define VPLL_K 0x400 |
| #define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ |
| | (VPLL_SEL_PF_DN_SPREAD << 29) \ |
| | (VPLL_MRR << 24) \ |
| | (VPLL_MFR << 16) \ |
| | (VPLL_K << 0)) |
| |
| /* DMC */ |
| #define DIRECT_CMD_NOP 0x07000000 |
| #define DIRECT_CMD_ZQ 0x0a000000 |
| #define DIRECT_CMD_CHIP1_SHIFT (1 << 20) |
| #define MEM_TIMINGS_MSR_COUNT 4 |
| #define CTRL_START (1 << 0) |
| #define CTRL_DLL_ON (1 << 1) |
| #define AREF_EN (1 << 5) |
| #define DRV_TYPE (1 << 6) |
| |
| struct mem_timings { |
| unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; |
| unsigned timingref; |
| unsigned timingrow; |
| unsigned timingdata; |
| unsigned timingpower; |
| unsigned zqcontrol; |
| unsigned control0; |
| unsigned control1; |
| unsigned control2; |
| unsigned concontrol; |
| unsigned prechconfig; |
| unsigned memcontrol; |
| unsigned memconfig0; |
| unsigned memconfig1; |
| unsigned dll_resync; |
| unsigned dll_on; |
| }; |
| |
| /* MIU */ |
| /* MIU Config Register Offsets*/ |
| #define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 |
| #define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 |
| #define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800 |
| #define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808 |
| #define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810 |
| #define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818 |
| #define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820 |
| #define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828 |
| #define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830 |
| |
| #ifdef CONFIG_TARGET_ORIGEN |
| /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ |
| #define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507 |
| #define APB_SFR_ARBRITATION_CONF_VAL 0x00000001 |
| #endif |
| |
| #define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000 |
| #define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff |
| #define INTERLEAVE_ADDR_MAP_EN 0x00000001 |
| |
| #ifdef CONFIG_MIU_1BIT_INTERLEAVED |
| /* Interleave_bit0: 0xC*/ |
| #define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c |
| #endif |
| #ifdef CONFIG_MIU_2BIT_INTERLEAVED |
| /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */ |
| #define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c |
| #endif |
| #define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000 |
| #define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff |
| #define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000 |
| #define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff |
| /* Enable SME0 and SME1*/ |
| #define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006 |
| |
| #define FORCE_DLL_RESYNC 3 |
| #define DLL_CONTROL_ON 1 |
| |
| #define DIRECT_CMD1 0x00020000 |
| #define DIRECT_CMD2 0x00030000 |
| #define DIRECT_CMD3 0x00010002 |
| #define DIRECT_CMD4 0x00000328 |
| |
| #define CTRL_ZQ_MODE_NOTERM (0x1 << 0) |
| #define CTRL_ZQ_START (0x1 << 1) |
| #define CTRL_ZQ_DIV (0 << 4) |
| #define CTRL_ZQ_MODE_DDS (0x7 << 8) |
| #define CTRL_ZQ_MODE_TERM (0x2 << 11) |
| #define CTRL_ZQ_FORCE_IMPN (0x5 << 14) |
| #define CTRL_ZQ_FORCE_IMPP (0x6 << 17) |
| #define CTRL_DCC (0xE38 << 20) |
| #define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\ |
| | CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\ |
| | CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\ |
| | CTRL_ZQ_FORCE_IMPP | CTRL_DCC) |
| |
| #define ASYNC (0 << 0) |
| #define CLK_RATIO (1 << 1) |
| #define DIV_PIPE (1 << 3) |
| #define AWR_ON (1 << 4) |
| #define AREF_DISABLE (0 << 5) |
| #define DRV_TYPE_DISABLE (0 << 6) |
| #define CHIP0_NOT_EMPTY (0 << 8) |
| #define CHIP1_NOT_EMPTY (0 << 9) |
| #define DQ_SWAP_DISABLE (0 << 10) |
| #define QOS_FAST_DISABLE (0 << 11) |
| #define RD_FETCH (0x3 << 12) |
| #define TIMEOUT_LEVEL0 (0xFFF << 16) |
| #define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\ |
| | AREF_DISABLE | DRV_TYPE_DISABLE\ |
| | CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\ |
| | DQ_SWAP_DISABLE | QOS_FAST_DISABLE\ |
| | RD_FETCH | TIMEOUT_LEVEL0) |
| |
| #define CLK_STOP_DISABLE (0 << 1) |
| #define DPWRDN_DISABLE (0 << 2) |
| #define DPWRDN_TYPE (0 << 3) |
| #define TP_DISABLE (0 << 4) |
| #define DSREF_DIABLE (0 << 5) |
| #define ADD_LAT_PALL (1 << 6) |
| #define MEM_TYPE_DDR3 (0x6 << 8) |
| #define MEM_WIDTH_32 (0x2 << 12) |
| #define NUM_CHIP_2 (1 << 16) |
| #define BL_8 (0x3 << 20) |
| #define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\ |
| | DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\ |
| | ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\ |
| | NUM_CHIP_2 | BL_8) |
| |
| |
| #define CHIP_BANK_8 (0x3 << 0) |
| #define CHIP_ROW_14 (0x2 << 4) |
| #define CHIP_COL_10 (0x3 << 8) |
| #define CHIP_MAP_INTERLEAVED (1 << 12) |
| #define CHIP_MASK (0xe0 << 16) |
| #ifdef CONFIG_MIU_LINEAR |
| #define CHIP0_BASE (0x40 << 24) |
| #define CHIP1_BASE (0x60 << 24) |
| #else |
| #define CHIP0_BASE (0x20 << 24) |
| #define CHIP1_BASE (0x40 << 24) |
| #endif |
| #define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\ |
| | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE) |
| #define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\ |
| | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE) |
| |
| #define TP_CNT (0xff << 24) |
| #define PRECHCONFIG TP_CNT |
| |
| #define CTRL_OFF (0 << 0) |
| #define CTRL_DLL_OFF (0 << 1) |
| #define CTRL_HALF (0 << 2) |
| #define CTRL_DFDQS (1 << 3) |
| #define DQS_DELAY (0 << 4) |
| #define CTRL_START_POINT (0x10 << 8) |
| #define CTRL_INC (0x10 << 16) |
| #define CTRL_FORCE (0x71 << 24) |
| #define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\ |
| | CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\ |
| | CTRL_INC | CTRL_FORCE) |
| |
| #define CTRL_SHIFTC (0x6 << 0) |
| #define CTRL_REF (8 << 4) |
| #define CTRL_SHGATE (1 << 29) |
| #define TERM_READ_EN (1 << 30) |
| #define TERM_WRITE_EN (1 << 31) |
| #define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\ |
| | TERM_READ_EN | TERM_WRITE_EN) |
| |
| #define CONTROL2_VAL 0x00000000 |
| |
| #ifdef CONFIG_TARGET_ORIGEN |
| #define TIMINGREF_VAL 0x000000BB |
| #define TIMINGROW_VAL 0x4046654f |
| #define TIMINGDATA_VAL 0x46400506 |
| #define TIMINGPOWER_VAL 0x52000A3C |
| #else |
| #define TIMINGREF_VAL 0x000000BC |
| #define TIMINGROW_VAL 0x45430506 |
| #define TIMINGDATA_VAL 0x56500506 |
| #define TIMINGPOWER_VAL 0x5444033d |
| #endif |
| #endif |
