arch/arm/dts/zynq-zed.dts

// SPDX-License-Identifier: GPL-2.0+
/*
 *  Copyright (C) 2011 - 2015 Xilinx
 *  Copyright (C) 2012 National Instruments Corp.
 */
/dts-v1/;
#include "zynq-7000.dtsi"

/ {
	model = "Avnet ZedBoard board";
	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";

	aliases {
		ethernet0 = &gem0;
		serial0 = &uart1;
		spi0 = &qspi;
		mmc0 = &sdhci0;
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x20000000>;
	};

	chosen {
		bootargs = "";
		stdout-path = "serial0:115200n8";
	};

	usb_phy0: phy0 {
		compatible = "usb-nop-xceiv";
		#phy-cells = <0>;
	};
};

&clkc {
	ps-clk-frequency = <33333333>;
};

&gem0 {
	status = "okay";
	phy-mode = "rgmii-id";
	phy-handle = <&ethernet_phy>;

	ethernet_phy: ethernet-phy@0 {
		reg = <0>;
	};
};

&qspi {
	bootph-all;
	status = "okay";
	num-cs = <1>;
	flash@0 {
		compatible = "spansion,s25fl256s1", "jedec,spi-nor";
		reg = <0>;
		spi-tx-bus-width = <1>;
		spi-rx-bus-width = <4>;
		spi-max-frequency = <50000000>;
		m25p,fast-read;
		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;
			partition@0 {
				label = "qspi-fsbl-uboot";
				reg = <0x0 0x100000>;
			};
			partition@100000 {
				label = "qspi-linux";
				reg = <0x100000 0x500000>;
			};
			partition@600000 {
				label = "qspi-device-tree";
				reg = <0x600000 0x20000>;
			};
			partition@620000 {
				label = "qspi-rootfs";
				reg = <0x620000 0x5e0000>;
			};
			partition@c00000 {
				label = "qspi-bitstream";
				reg = <0xc00000 0x400000>;
			};
		};
	};
};

&sdhci0 {
	bootph-all;
	status = "okay";
};

&uart1 {
	bootph-all;
	status = "okay";
};

&usb0 {
	status = "okay";
	dr_mode = "host";
	usb-phy = <&usb_phy0>;
};