blob: ff475f868249b9f28742938f758d62d8fe08e7be [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Xilinx ZC770 XM010 board DTS
*
* Copyright (C) 2013-2018 Xilinx, Inc.
*/
/dts-v1/;
#include "zynq-7000.dtsi"
/ {
model = "Xilinx ZC770 XM010 board";
compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
i2c0 = &i2c0;
serial0 = &uart1;
spi0 = &qspi;
spi1 = &spi1;
};
chosen {
bootargs = "";
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x40000000>;
};
usb_phy0: phy0 {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
};
&can0 {
status = "okay";
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@7 {
reg = <7>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
eeprom: eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
};
};
&qspi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "n25q128a11", "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
partition@100000 {
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
partition@600000 {
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
partition@620000 {
label = "qspi-rootfs";
reg = <0x620000 0x5e0000>;
};
partition@c00000 {
label = "qspi-bitstream";
reg = <0xc00000 0x400000>;
};
};
};
};
&sdhci0 {
status = "okay";
};
&spi1 {
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
flash@1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "data";
reg = <0x0 0x100000>;
};
};
};
};
&uart1 {
bootph-all;
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
usb-phy = <&usb_phy0>;
};