| #include "skeleton.dtsi" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| model = "Atmel SAMA5D2 family SoC"; |
| compatible = "atmel,sama5d2"; |
| interrupt-parent = <&aic>; |
| |
| aliases { |
| spi0 = &spi0; |
| spi1 = &qspi0; |
| spi2 = &qspi1; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| }; |
| |
| clocks { |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bootph-all; |
| |
| nfc_sram: sram@100000 { |
| compatible = "mmio-sram"; |
| no-memory-wc; |
| reg = <0x00100000 0x2400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00100000 0x2400>; |
| }; |
| |
| usb1: ohci@400000 { |
| compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| reg = <0x00400000 0x100000>; |
| clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; |
| clock-names = "ohci_clk", "hclk", "uhpck"; |
| status = "disabled"; |
| }; |
| |
| usb2: ehci@500000 { |
| compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| reg = <0x00500000 0x100000>; |
| clocks = <&utmi>, <&uhphs_clk>; |
| clock-names = "usb_clk", "ehci_clk"; |
| status = "disabled"; |
| }; |
| |
| ebi: ebi@10000000 { |
| compatible = "atmel,sama5d3-ebi"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| atmel,smc = <&hsmc>; |
| reg = <0x10000000 0x10000000 |
| 0x60000000 0x30000000>; |
| ranges = <0x0 0x0 0x10000000 0x10000000 |
| 0x1 0x0 0x60000000 0x10000000 |
| 0x2 0x0 0x70000000 0x10000000 |
| 0x3 0x0 0x80000000 0x10000000>; |
| clocks = <&h32ck>; |
| status = "disabled"; |
| |
| nand_controller: nand-controller { |
| compatible = "atmel,sama5d3-nand-controller"; |
| atmel,nfc-sram = <&nfc_sram>; |
| atmel,nfc-io = <&nfc_io>; |
| ecc-engine = <&pmecc>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| }; |
| }; |
| |
| sdmmc0: sdio-host@a0000000 { |
| compatible = "atmel,sama5d2-sdhci"; |
| reg = <0xa0000000 0x300>; |
| clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; |
| clock-names = "hclock", "multclk", "baseclk"; |
| status = "disabled"; |
| }; |
| |
| sdmmc1: sdio-host@b0000000 { |
| compatible = "atmel,sama5d2-sdhci"; |
| reg = <0xb0000000 0x300>; |
| clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>; |
| clock-names = "hclock", "multclk", "baseclk"; |
| status = "disabled"; |
| }; |
| |
| nfc_io: nfc-io@c0000000 { |
| compatible = "atmel,sama5d3-nfc-io", "syscon"; |
| reg = <0xc0000000 0x8000000>; |
| }; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bootph-all; |
| |
| hlcdc: hlcdc@f0000000 { |
| compatible = "atmel,at91sam9x5-hlcdc"; |
| reg = <0xf0000000 0x2000>; |
| clocks = <&lcdc_clk>; |
| status = "disabled"; |
| }; |
| |
| pmc: clock-controller@f0014000 { |
| compatible = "atmel,sama5d2-pmc", "syscon"; |
| reg = <0xf0014000 0x160>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| bootph-all; |
| |
| main: mainck { |
| compatible = "atmel,at91sam9x5-clk-main"; |
| #clock-cells = <0>; |
| bootph-all; |
| }; |
| |
| plla: pllack@0 { |
| compatible = "atmel,sama5d3-clk-pll"; |
| #clock-cells = <0>; |
| clocks = <&main>; |
| reg = <0>; |
| atmel,clk-input-range = <12000000 12000000>; |
| #atmel,pll-clk-output-range-cells = <4>; |
| atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; |
| bootph-all; |
| }; |
| |
| plladiv: plladivck { |
| compatible = "atmel,at91sam9x5-clk-plldiv"; |
| #clock-cells = <0>; |
| clocks = <&plla>; |
| }; |
| |
| audio_pll_frac: audiopll_fracck { |
| compatible = "atmel,sama5d2-clk-audio-pll-frac"; |
| #clock-cells = <0>; |
| clocks = <&main>; |
| }; |
| |
| audio_pll_pad: audiopll_padck { |
| compatible = "atmel,sama5d2-clk-audio-pll-pad"; |
| #clock-cells = <0>; |
| clocks = <&audio_pll_frac>; |
| }; |
| |
| audio_pll_pmc: audiopll_pmcck { |
| compatible = "atmel,sama5d2-clk-audio-pll-pmc"; |
| #clock-cells = <0>; |
| clocks = <&audio_pll_frac>; |
| }; |
| |
| utmi: utmick { |
| compatible = "atmel,at91sam9x5-clk-utmi"; |
| #clock-cells = <0>; |
| clocks = <&main>; |
| regmap-sfr = <&sfr>; |
| bootph-all; |
| }; |
| |
| mck: masterck { |
| compatible = "atmel,at91sam9x5-clk-master"; |
| #clock-cells = <0>; |
| clocks = <&main>, <&plladiv>, <&utmi>; |
| atmel,clk-output-range = <124000000 166000000>; |
| atmel,clk-divisors = <1 2 4 3>; |
| bootph-all; |
| }; |
| |
| h32ck: h32mxck { |
| #clock-cells = <0>; |
| compatible = "atmel,sama5d4-clk-h32mx"; |
| clocks = <&mck>; |
| bootph-all; |
| }; |
| |
| usb: usbck { |
| compatible = "atmel,at91sam9x5-clk-usb"; |
| #clock-cells = <0>; |
| clocks = <&plladiv>, <&utmi>; |
| }; |
| |
| prog: progck { |
| compatible = "atmel,at91sam9x5-clk-programmable"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&pmc>; |
| clocks = <&main>, <&plladiv>, <&utmi>, <&mck>; |
| |
| prog0: prog@0 { |
| #clock-cells = <0>; |
| reg = <0>; |
| }; |
| |
| prog1: prog@1 { |
| #clock-cells = <0>; |
| reg = <1>; |
| }; |
| |
| prog2: prog@2 { |
| #clock-cells = <0>; |
| reg = <2>; |
| }; |
| }; |
| |
| systemck { |
| compatible = "atmel,at91rm9200-clk-system"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ddrck: ddrck@2 { |
| #clock-cells = <0>; |
| reg = <2>; |
| clocks = <&mck>; |
| }; |
| |
| lcdck: lcdck@3 { |
| #clock-cells = <0>; |
| reg = <3>; |
| clocks = <&mck>; |
| }; |
| |
| uhpck: uhpck@6 { |
| #clock-cells = <0>; |
| reg = <6>; |
| clocks = <&usb>; |
| }; |
| |
| udpck: udpck@7 { |
| #clock-cells = <0>; |
| reg = <7>; |
| clocks = <&usb>; |
| }; |
| |
| pck0: pck0@8 { |
| #clock-cells = <0>; |
| reg = <8>; |
| clocks = <&prog0>; |
| }; |
| |
| pck1: pck1@9 { |
| #clock-cells = <0>; |
| reg = <9>; |
| clocks = <&prog1>; |
| }; |
| |
| pck2: pck2@10 { |
| #clock-cells = <0>; |
| reg = <10>; |
| clocks = <&prog2>; |
| }; |
| |
| iscck: iscck@18 { |
| #clock-cells = <0>; |
| reg = <18>; |
| clocks = <&mck>; |
| }; |
| }; |
| |
| periph32ck { |
| compatible = "atmel,at91sam9x5-clk-peripheral"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&h32ck>; |
| bootph-all; |
| |
| macb0_clk: macb0_clk@5 { |
| #clock-cells = <0>; |
| reg = <5>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| tdes_clk: tdes_clk@11 { |
| #clock-cells = <0>; |
| reg = <11>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| matrix1_clk: matrix1_clk@14 { |
| #clock-cells = <0>; |
| reg = <14>; |
| }; |
| |
| hsmc_clk: hsmc_clk@17 { |
| #clock-cells = <0>; |
| reg = <17>; |
| }; |
| |
| pioA_clk: pioA_clk@18 { |
| #clock-cells = <0>; |
| reg = <18>; |
| atmel,clk-output-range = <0 83000000>; |
| bootph-all; |
| }; |
| |
| flx0_clk: flx0_clk@19 { |
| #clock-cells = <0>; |
| reg = <19>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| flx1_clk: flx1_clk@20 { |
| #clock-cells = <0>; |
| reg = <20>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| flx2_clk: flx2_clk@21 { |
| #clock-cells = <0>; |
| reg = <21>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| flx3_clk: flx3_clk@22 { |
| #clock-cells = <0>; |
| reg = <22>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| flx4_clk: flx4_clk@23 { |
| #clock-cells = <0>; |
| reg = <23>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| uart0_clk: uart0_clk@24 { |
| #clock-cells = <0>; |
| reg = <24>; |
| atmel,clk-output-range = <0 83000000>; |
| bootph-all; |
| }; |
| |
| uart1_clk: uart1_clk@25 { |
| #clock-cells = <0>; |
| reg = <25>; |
| atmel,clk-output-range = <0 83000000>; |
| bootph-all; |
| }; |
| |
| uart2_clk: uart2_clk@26 { |
| #clock-cells = <0>; |
| reg = <26>; |
| atmel,clk-output-range = <0 83000000>; |
| bootph-all; |
| }; |
| |
| uart3_clk: uart3_clk@27 { |
| #clock-cells = <0>; |
| reg = <27>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| uart4_clk: uart4_clk@28 { |
| #clock-cells = <0>; |
| reg = <28>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| twi0_clk: twi0_clk@29 { |
| reg = <29>; |
| #clock-cells = <0>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| twi1_clk: twi1_clk@30 { |
| #clock-cells = <0>; |
| reg = <30>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| spi0_clk: spi0_clk@33 { |
| #clock-cells = <0>; |
| reg = <33>; |
| atmel,clk-output-range = <0 83000000>; |
| bootph-all; |
| }; |
| |
| spi1_clk: spi1_clk@34 { |
| #clock-cells = <0>; |
| reg = <34>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| tcb0_clk: tcb0_clk@35 { |
| #clock-cells = <0>; |
| reg = <35>; |
| atmel,clk-output-range = <0 83000000>; |
| bootph-all; |
| }; |
| |
| tcb1_clk: tcb1_clk@36 { |
| #clock-cells = <0>; |
| reg = <36>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| pwm_clk: pwm_clk@38 { |
| #clock-cells = <0>; |
| reg = <38>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| adc_clk: adc_clk@40 { |
| #clock-cells = <0>; |
| reg = <40>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| uhphs_clk: uhphs_clk@41 { |
| #clock-cells = <0>; |
| reg = <41>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| udphs_clk: udphs_clk@42 { |
| #clock-cells = <0>; |
| reg = <42>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| ssc0_clk: ssc0_clk@43 { |
| #clock-cells = <0>; |
| reg = <43>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| ssc1_clk: ssc1_clk@44 { |
| #clock-cells = <0>; |
| reg = <44>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| trng_clk: trng_clk@47 { |
| #clock-cells = <0>; |
| reg = <47>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| pdmic_clk: pdmic_clk@48 { |
| #clock-cells = <0>; |
| reg = <48>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| i2s0_clk: i2s0_clk@54 { |
| #clock-cells = <0>; |
| reg = <54>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| i2s1_clk: i2s1_clk@55 { |
| #clock-cells = <0>; |
| reg = <55>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| can0_clk: can0_clk@56 { |
| #clock-cells = <0>; |
| reg = <56>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| can1_clk: can1_clk@57 { |
| #clock-cells = <0>; |
| reg = <57>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| classd_clk: classd_clk@59 { |
| #clock-cells = <0>; |
| reg = <59>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| }; |
| |
| periph64ck { |
| compatible = "atmel,at91sam9x5-clk-peripheral"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&mck>; |
| bootph-all; |
| |
| dma0_clk: dma0_clk@6 { |
| #clock-cells = <0>; |
| reg = <6>; |
| }; |
| |
| dma1_clk: dma1_clk@7 { |
| #clock-cells = <0>; |
| reg = <7>; |
| }; |
| |
| aes_clk: aes_clk@9 { |
| #clock-cells = <0>; |
| reg = <9>; |
| }; |
| |
| aesb_clk: aesb_clk@10 { |
| #clock-cells = <0>; |
| reg = <10>; |
| }; |
| |
| sha_clk: sha_clk@12 { |
| #clock-cells = <0>; |
| reg = <12>; |
| }; |
| |
| mpddr_clk: mpddr_clk@13 { |
| #clock-cells = <0>; |
| reg = <13>; |
| }; |
| |
| matrix0_clk: matrix0_clk@15 { |
| #clock-cells = <0>; |
| reg = <15>; |
| }; |
| |
| sdmmc0_hclk: sdmmc0_hclk@31 { |
| #clock-cells = <0>; |
| reg = <31>; |
| bootph-all; |
| }; |
| |
| sdmmc1_hclk: sdmmc1_hclk@32 { |
| #clock-cells = <0>; |
| reg = <32>; |
| bootph-all; |
| }; |
| |
| lcdc_clk: lcdc_clk@45 { |
| #clock-cells = <0>; |
| reg = <45>; |
| }; |
| |
| isc_clk: isc_clk@46 { |
| #clock-cells = <0>; |
| reg = <46>; |
| }; |
| |
| qspi0_clk: qspi0_clk@52 { |
| #clock-cells = <0>; |
| reg = <52>; |
| bootph-all; |
| }; |
| |
| qspi1_clk: qspi1_clk@53 { |
| #clock-cells = <0>; |
| reg = <53>; |
| bootph-all; |
| }; |
| }; |
| |
| gck { |
| compatible = "atmel,sama5d2-clk-generated"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&pmc>; |
| clocks = <&main>, <&plla>, <&utmi>, <&mck>; |
| bootph-all; |
| |
| sdmmc0_gclk: sdmmc0_gclk@31 { |
| #clock-cells = <0>; |
| reg = <31>; |
| bootph-all; |
| }; |
| |
| sdmmc1_gclk: sdmmc1_gclk@32 { |
| #clock-cells = <0>; |
| reg = <32>; |
| bootph-all; |
| }; |
| |
| tcb0_gclk: tcb0_gclk@35 { |
| #clock-cells = <0>; |
| reg = <35>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| tcb1_gclk: tcb1_gclk@36 { |
| #clock-cells = <0>; |
| reg = <36>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| pwm_gclk: pwm_gclk@38 { |
| #clock-cells = <0>; |
| reg = <38>; |
| atmel,clk-output-range = <0 83000000>; |
| }; |
| |
| pdmic_gclk: pdmic_gclk@48 { |
| #clock-cells = <0>; |
| reg = <48>; |
| }; |
| |
| i2s0_gclk: i2s0_gclk@54 { |
| #clock-cells = <0>; |
| reg = <54>; |
| }; |
| |
| i2s1_gclk: i2s1_gclk@55 { |
| #clock-cells = <0>; |
| reg = <55>; |
| }; |
| |
| can0_gclk: can0_gclk@56 { |
| #clock-cells = <0>; |
| reg = <56>; |
| atmel,clk-output-range = <0 80000000>; |
| }; |
| |
| can1_gclk: can1_gclk@57 { |
| #clock-cells = <0>; |
| reg = <57>; |
| atmel,clk-output-range = <0 80000000>; |
| }; |
| |
| classd_gclk: classd_gclk@59 { |
| #clock-cells = <0>; |
| reg = <59>; |
| atmel,clk-output-range = <0 100000000>; |
| }; |
| }; |
| }; |
| |
| qspi0: spi@f0020000 { |
| compatible = "atmel,sama5d2-qspi"; |
| reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&qspi0_clk>; |
| status = "disabled"; |
| }; |
| |
| qspi1: spi@f0024000 { |
| compatible = "atmel,sama5d2-qspi"; |
| reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&qspi1_clk>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@f8000000 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xf8000000 0x100>; |
| clocks = <&spi0_clk>; |
| clock-names = "spi_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| macb0: ethernet@f8008000 { |
| compatible = "cdns,macb"; |
| reg = <0xf8008000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&macb0_clk>, <&macb0_clk>; |
| clock-names = "hclk", "pclk"; |
| status = "disabled"; |
| }; |
| |
| tcb0: timer@f800c000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| reg = <0xf800c000 0x100>; |
| interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&tcb0_clk>, <&tcb0_gclk>, <&clk32k>; |
| clock-names = "t0_clk", "gclk", "slow_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| bootph-all; |
| |
| timer0: timer@0 { |
| compatible = "atmel,tcb-timer"; |
| reg = <0>, <1>; |
| bootph-all; |
| }; |
| }; |
| |
| hsmc: hsmc@f8014000 { |
| compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; |
| reg = <0xf8014000 0x1000>; |
| interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; |
| clocks = <&hsmc_clk>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pmecc: ecc-engine@f8014070 { |
| compatible = "atmel,sama5d2-pmecc"; |
| reg = <0xf8014070 0x490>, |
| <0xf8014500 0x200>; |
| }; |
| }; |
| |
| uart0: serial@f801c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf801c000 0x100>; |
| clocks = <&uart0_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@f8020000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8020000 0x100>; |
| clocks = <&uart1_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@f8024000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8024000 0x100>; |
| clocks = <&uart2_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@f8028000 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0xf8028000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&twi0_clk>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@f802c000 { |
| compatible = "atmel,sama5d2-pwm"; |
| reg = <0xf802c000 0x4000>; |
| clocks = <&pwm_clk>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| sfr: sfr@f8030000 { |
| compatible = "atmel,sama5d2-sfr", "syscon"; |
| reg = <0xf8030000 0x98>; |
| }; |
| |
| reset_controller: reset-controller@f8048000 { |
| compatible = "atmel,sama5d3-rstc"; |
| reg = <0xf8048000 0x10>; |
| clocks = <&clk32k>; |
| }; |
| |
| shutdown_controller: poweroff@f8048010 { |
| compatible = "atmel,sama5d2-shdwc"; |
| reg = <0xf8048010 0x10>; |
| clocks = <&clk32k>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| atmel,wakeup-rtc-timer; |
| }; |
| |
| pit: timer@f8048030 { |
| compatible = "atmel,at91sam9260-pit"; |
| reg = <0xf8048030 0x10>; |
| clocks = <&h32ck>; |
| }; |
| |
| watchdog: watchdog@f8048040 { |
| compatible = "atmel,sama5d4-wdt"; |
| reg = <0xf8048040 0x10>; |
| clocks = <&clk32k>; |
| status = "disabled"; |
| }; |
| |
| sckc@f8048050 { |
| compatible = "atmel,at91sam9x5-sckc"; |
| reg = <0xf8048050 0x4>; |
| |
| slow_rc_osc: slow_rc_osc { |
| compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-accuracy = <250000000>; |
| atmel,startup-time-usec = <75>; |
| }; |
| |
| slow_osc: slow_osc { |
| compatible = "atmel,at91sam9x5-clk-slow-osc"; |
| #clock-cells = <0>; |
| clocks = <&slow_xtal>; |
| atmel,startup-time-usec = <1200000>; |
| }; |
| |
| clk32k: slowck { |
| compatible = "atmel,at91sam9x5-clk-slow"; |
| #clock-cells = <0>; |
| clocks = <&slow_rc_osc &slow_osc>; |
| }; |
| }; |
| |
| spi1: spi@fc000000 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xfc000000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@fc008000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfc008000 0x100>; |
| clocks = <&uart3_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@fc00c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfc00c000 0x100>; |
| clocks = <&uart4_clk>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| flx4: flexcom@fc018000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xfc018000 0x200>; |
| clocks = <&flx4_clk>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xfc018000 0x800>; |
| status = "disabled"; |
| |
| i2c6: i2c@600 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0x600 0x200>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&flx4_clk>; |
| clock-names = "i2c6_clk"; |
| status = "disabled"; |
| }; |
| }; |
| |
| aic: interrupt-controller@fc020000 { |
| #interrupt-cells = <3>; |
| compatible = "atmel,sama5d2-aic"; |
| interrupt-controller; |
| reg = <0xfc020000 0x200>; |
| atmel,external-irqs = <49>; |
| }; |
| |
| i2c1: i2c@fc028000 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0xfc028000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&twi1_clk>; |
| status = "disabled"; |
| }; |
| |
| pioA: pinctrl@fc038000 { |
| compatible = "atmel,sama5d2-pinctrl"; |
| reg = <0xfc038000 0x600>; |
| clocks = <&pioA_clk>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| bootph-all; |
| }; |
| }; |
| }; |
| |
| onewire_tm: onewire { |
| compatible = "w1-gpio"; |
| status = "disabled"; |
| }; |
| }; |
